[Thu Jul 26 03:37:27 2012] Detection parameters:
  Position = (415.8, 251.9) = 0 40 47.76 40 51 14.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 78.0 +/- 13.3
  Background counts = 30.2
  Rate = 0.002 +/- 0.0003

[Thu Jul 26 03:37:27 2012] Off-axis axis estimate = 9.15'
[Thu Jul 26 04:57:18 2012] Using EEF radius (= 11.00 ")to estimate initial spatial extent for simple fitting
[Thu Jul 26 04:57:18 2012] Initial guess for spatial extent in simple fitting = 11.00"
[Thu Jul 26 04:57:18 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.981
[Thu Jul 26 04:57:18 2012] Giving source the simple spatial ID 23 for pass 0, mean size = 11.00"
[Thu Jul 26 05:42:02 2012] fullrun_mos1_xmm0112570201_pi300-10000_cl_pass0_src23.ximg exists
[Thu Jul 26 05:42:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570201_pi300-10000_cl_pass0_src23.csv
[Thu Jul 26 05:42:02 2012] fullrun_mos1_xmm0112570201_pi300-10000_cl_pass0_src23_1.ximg exists
[Thu Jul 26 05:42:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570201_pi300-10000_cl_pass0_src23.csv
[Thu Jul 26 05:42:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112570201_pi300-10000_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112570201_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 26 05:42:02 2012] fullrun_mos1_xmm0112570201_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Thu Jul 26 05:42:02 2012] fullrun_mos1_xmm0112570201_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Thu Jul 26 05:42:02 2012] Fit fullrun_mos1_xmm0112570201_pi300-10000_cl_pass0_tfrozen_src23 appears to have run properly
[Thu Jul 26 06:39:33 2012] Spatial fit model total counts = 507.619000, observed total counts = 504.000000
[Thu Jul 26 06:39:33 2012] Offset between fit and detection position for source 35 = 6.563107 pixels
[Thu Jul 26 06:39:33 2012] 570.762000 total counts/ 222.813000 bgd. counts: snr = 23.310164
Spatial fit parameters:
  Offset between fit and detection position for source 35 = 6.563107 pixels
  Position = (410.8, 247.7) = 0 40 49.68 40 50 56.8
  Extent = 22.0 (22.0-44.0)", rotation angle = 0
  Source counts = 347.9 +/- 23.9
  Background counts = 222.8
  Rate = 0.005 +/- 0.0004
[Thu Jul 26 06:39:33 2012] Vigneting correction estimate = 1.000000
[Thu Jul 26 06:39:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 26 06:39:33 2012] Assessing source extent using major axis lower bound
[Thu Jul 26 06:39:33 2012] Source does appear to be extended
[Thu Jul 26 06:39:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 26 06:39:33 2012] Source is confused with source 22
[Thu Jul 26 07:43:01 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jul 26 07:43:01 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jul 26 07:43:01 2012] Initial guess for spatial extent in simple fitting = 22.01"
[Thu Jul 26 07:43:01 2012] source mask rpix=5.1, npix_max = 123, mask sum = 121, frac = 0.979
[Thu Jul 26 07:43:01 2012] Giving source the simple spatial ID 23 for pass 1, mean size = 22.01"
[Thu Jul 26 08:26:26 2012] fullrun_mos1_xmm0112570201_pi300-10000_cl_pass1_src23.ximg exists
[Thu Jul 26 08:26:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570201_pi300-10000_cl_pass1_src23.csv
[Thu Jul 26 08:26:26 2012] fullrun_mos1_xmm0112570201_pi300-10000_cl_pass1_src23_1.ximg exists
[Thu Jul 26 08:26:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570201_pi300-10000_cl_pass1_src23.csv
[Thu Jul 26 08:26:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112570201_pi300-10000_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112570201_pi300-10000_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 26 08:26:26 2012] fullrun_mos1_xmm0112570201_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Thu Jul 26 08:26:26 2012] fullrun_mos1_xmm0112570201_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Thu Jul 26 08:26:26 2012] Fit fullrun_mos1_xmm0112570201_pi300-10000_cl_pass1_tfrozen_src23 appears to have run properly
[Thu Jul 26 09:18:59 2012] Warning, spatial fit 23 centroid is now closest to src. 22
[Thu Jul 26 09:18:59 2012] Vigneting correction estimate = 1.000000
[Thu Jul 26 09:18:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 26 09:18:59 2012] Assessing source extent using major axis lower bound
[Thu Jul 26 09:18:59 2012] Source does appear to be extended
[Thu Jul 26 09:18:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 26 11:09:19 2012] XMMSAS src. selection expression = ellipse(35688.360000, 21498.956000, 1320.450038, 1320.450038, 0.000000, X, Y)
[Thu Jul 26 11:09:19 2012] Writing source region out to fullrun_mos1_xmm0112570201_pi300-10000_pass1_cl_src35_src.reg
[Thu Jul 26 11:09:19 2012] Extracting stamp from image fullrun_mos1_xmm0112570201_pi300-10000_cl_sm2.00.img.gz, (335, 172) - (487, 324)
[Thu Jul 26 11:09:19 2012] XMMSAS bgd. selection expression = annulus(35688.360000, 21498.956000, 2200.750063, 4401.500127, X, Y) && !ellipse(36619.456482, 22221.078613, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31634.969680, 21314.131000, 347.963226, 347.963226, 0.000000, X, Y) && !ellipse(36984.589386, 19076.484482, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31821.155200, 23757.767600, 575.716817, 490.738414, 150.805870, X, Y)
[Thu Jul 26 11:09:19 2012] Writing fullrun_mos1_xmm0112570201_pi300-10000_pass1_cl_src35.gif
[Thu Jul 26 11:22:53 2012] Mean detx,y = (-1365.01, 9373.92) 
[Thu Jul 26 11:22:54 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul 26 11:23:46 2012] Binned source spectrum to 10 counts/bin
[Thu Jul 26 11:23:46 2012] Setting source spectrum file to fullrun_mos1_xmm0112570201_pi300-10000_pass1_cl_src35_src_b10.pi.gz
[Thu Jul 26 11:23:46 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112570201_pi300-10000_pass1_cl_src35_bgd.pi.gz
[Thu Jul 26 13:00:52 2012] Updating aperture counts using extracted products
[Thu Jul 26 13:00:52 2012] Error reading totcts from fullrun_mos1_xmm0112570201_pi300-10000_pass1_cl_src35_src_b10.pi.gz
[Thu Jul 26 13:00:53 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 26 13:00:53 2012] Using photon index=1.80, rate=0.00539, arf fullrun_mos1_xmm0112570201_pi300-10000_pass1_cl_src35.arf
[Thu Jul 26 13:00:53 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 26 13:00:53 2012] Updating source flux to 6.7e-14
[Thu Jul 26 13:00:56 2012] Flag c found in src. 35 procflags, skipping spectral fitting