[Thu Jul 26 03:37:26 2012] Detection parameters:
  Position = (317.1, 353.6) = 0 41 25.59 40 58 45.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1689.6 +/- 51.4
  Background counts = 32.0
  Rate = 0.04 +/- 0.001

[Thu Jul 26 03:37:27 2012] Off-axis axis estimate = 4.22'
[Thu Jul 26 04:57:18 2012] Using EEF radius (= 8.54 ")to estimate initial spatial extent for simple fitting
[Thu Jul 26 04:57:18 2012] Initial guess for spatial extent in simple fitting = 8.54"
[Thu Jul 26 04:57:18 2012] source mask rpix=2.0, npix_max = 24, mask sum = 23, frac = 0.948
[Thu Jul 26 04:57:18 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 8.54"
[Thu Jul 26 05:42:02 2012] fullrun_mos1_xmm0112570201_pi300-10000_cl_pass0_src2.ximg exists
[Thu Jul 26 05:42:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570201_pi300-10000_cl_pass0_src2.csv
[Thu Jul 26 05:42:02 2012] fullrun_mos1_xmm0112570201_pi300-10000_cl_pass0_src2_1.ximg exists
[Thu Jul 26 05:42:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570201_pi300-10000_cl_pass0_src2.csv
[Thu Jul 26 05:42:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112570201_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112570201_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 26 05:42:02 2012] fullrun_mos1_xmm0112570201_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Thu Jul 26 05:42:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570201_pi300-10000_cl_pass0_tfrozen_src2.csv
[Thu Jul 26 05:42:02 2012] fullrun_mos1_xmm0112570201_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Thu Jul 26 05:42:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570201_pi300-10000_cl_pass0_tfrozen_src2.csv
[Thu Jul 26 05:42:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112570201_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112570201_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 26 06:39:33 2012] Spatial fit model total counts = 2220.110000, observed total counts = 1625.000000
[Thu Jul 26 06:39:33 2012] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jul 26 06:39:33 2012] Vigneting correction estimate = 1.000000
[Thu Jul 26 06:39:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 26 06:39:33 2012] Assessing source extent using major
[Thu Jul 26 06:39:33 2012] Source does appear to be extended
[Thu Jul 26 06:39:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 26 07:43:01 2012] Using EEF radius (= 8.54 ")to estimate initial spatial extent for simple fitting
[Thu Jul 26 07:43:01 2012] Initial guess for spatial extent in simple fitting = 8.54"
[Thu Jul 26 07:43:01 2012] source mask rpix=2.0, npix_max = 24, mask sum = 23, frac = 0.948
[Thu Jul 26 07:43:01 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 8.54"
[Thu Jul 26 08:26:26 2012] fullrun_mos1_xmm0112570201_pi300-10000_cl_pass1_src2.ximg exists
[Thu Jul 26 08:26:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570201_pi300-10000_cl_pass1_src2.csv
[Thu Jul 26 08:26:26 2012] fullrun_mos1_xmm0112570201_pi300-10000_cl_pass1_src2_1.ximg exists
[Thu Jul 26 08:26:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570201_pi300-10000_cl_pass1_src2.csv
[Thu Jul 26 08:26:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112570201_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112570201_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 26 08:26:26 2012] fullrun_mos1_xmm0112570201_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Thu Jul 26 08:26:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570201_pi300-10000_cl_pass1_tfrozen_src2.csv
[Thu Jul 26 08:26:26 2012] fullrun_mos1_xmm0112570201_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Thu Jul 26 08:26:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570201_pi300-10000_cl_pass1_tfrozen_src2.csv
[Thu Jul 26 08:26:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112570201_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112570201_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 26 09:18:58 2012] Source 2 is offset by 4.671697 and 7.421599 pixels which is larger than
2 X fitted extent = 1.646428 x 1.646428, not incorporating fit results
[Thu Jul 26 09:18:59 2012] Vigneting correction estimate = 1.000000
[Thu Jul 26 09:18:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 26 09:18:59 2012] Assessing source extent using major
[Thu Jul 26 09:18:59 2012] Source does appear to be extended
[Thu Jul 26 09:18:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 26 11:09:19 2012] Counts = 1689.642334, rescaling region sizes by 2.000000
[Thu Jul 26 11:09:19 2012] XMMSAS src. selection expression = ellipse(27536.213623, 30712.125153, 1305.000000, 1305.000000, 0.000000, X, Y)
[Thu Jul 26 11:09:19 2012] Writing source region out to fullrun_mos1_xmm0112570201_pi300-10000_pass1_cl_src2_src.reg
[Thu Jul 26 11:09:19 2012] Extracting stamp from image fullrun_mos1_xmm0112570201_pi300-10000_cl_sm2.00.img.gz, (242, 279) - (392, 429)
[Thu Jul 26 11:09:19 2012] XMMSAS bgd. selection expression = annulus(27536.213623, 30712.125153, 4350.000000, 8700.000000, X, Y) && !ellipse(29142.227400, 22709.295600, 384.736811, 384.736811, 0.000000, X, Y) && !ellipse(27427.620260, 24463.242000, 395.856011, 395.856011, 0.000000, X, Y) && !ellipse(29884.205466, 33568.259205, 558.031894, 352.252294, 16.714555, X, Y) && !ellipse(26789.639000, 34921.467000, 475.681614, 475.681614, 0.000000, X, Y) && !ellipse(30662.391272, 25574.014800, 399.186411, 399.186411, 0.000000, X, Y) && !ellipse(24803.928284, 33691.232635, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22094.822678, 33686.873077, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36619.456482, 22221.078613, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24028.444672, 36581.855957, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23593.264400, 38390.899196, 384.683211, 384.683211, 0.000000, X, Y) && !ellipse(26842.407860, 26112.121000, 384.683211, 384.683211, 0.000000, X, Y) && !ellipse(28878.846600, 32525.842600, 449.720813, 323.126409, 341.543516, X, Y) && !ellipse(35688.360000, 21498.956000, 1760.600051, 1760.600051, 0.000000, X, Y) && !ellipse(30364.024800, 22186.437000, 339.351210, 339.351210, 0.000000, X, Y) && !ellipse(33279.798407, 32755.079829, 894.013016, 626.399628, 75.127731, X, Y) && !ellipse(30329.976580, 32104.679600, 439.384013, 439.384013, 0.000000, X, Y) && !ellipse(28616.178650, 36670.831299, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31821.155200, 23757.767600, 575.716817, 490.738414, 150.805870, X, Y) && !ellipse(27592.301400, 21751.513600, 512.259215, 512.259215, 0.000000, X, Y)
[Thu Jul 26 11:09:19 2012] Writing fullrun_mos1_xmm0112570201_pi300-10000_pass1_cl_src2.gif
[Thu Jul 26 11:12:23 2012] Mean detx,y = (3668.13, -1850.48) 
[Thu Jul 26 11:12:26 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul 26 11:15:04 2012] Binned source spectrum to 10 counts/bin
[Thu Jul 26 11:15:04 2012] Setting source spectrum file to fullrun_mos1_xmm0112570201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu Jul 26 11:15:04 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112570201_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Thu Jul 26 11:29:13 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jul 26 11:29:13 2012] rmf not generated due to insufficient counts
[Thu Jul 26 13:00:51 2012] Updating aperture counts using extracted products
[Thu Jul 26 13:00:51 2012] Error reading totcts from fullrun_mos1_xmm0112570201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu Jul 26 13:00:53 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 26 13:00:53 2012] Using photon index=1.80, rate=0.0363, arf fullrun_mos1_xmm0112570201_pi300-10000_pass1_cl_src2.arf
[Thu Jul 26 13:00:53 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 26 13:00:53 2012] Updating source flux to 3.6e-13
[Thu Jul 26 13:00:56 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Jul 26 13:02:25 2012] xmm0112570201/analysis//spectral/fullrun_mos1_xmm0112570201_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete