[Wed Jan 25 01:01:40 2012] Detection parameters:
  Position = (404.5, 372.8) = 0 42 9.50 41 20 7.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 119.8 +/- 19.1
  Background counts = 90.9
  Rate = 0.003 +/- 0.0006

[Wed Jan 25 01:01:42 2012] Off-axis axis estimate = 9.39'
[Wed Jan 25 01:09:33 2012] Using EEF radius (= 11.12 ")to estimate initial spatial extent for simple fitting
[Wed Jan 25 01:09:33 2012] Initial guess for spatial extent in simple fitting = 11.12"
[Wed Jan 25 01:09:33 2012] source mask rpix=2.6, npix_max = 37, mask sum = 42, frac = 1.123
[Wed Jan 25 01:09:33 2012] Giving source the simple spatial ID 93 for pass 0, mean size = 11.12"
[Wed Jan 25 09:18:41 2012] fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_src93.ximg exists
[Wed Jan 25 09:18:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_src93.csv
[Wed Jan 25 09:18:41 2012] fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_src93_1.ximg exists
[Wed Jan 25 09:18:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_src93.csv
[Wed Jan 25 09:18:41 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_src93_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_src93.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan 25 09:18:43 2012] fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src93.ximg exists
[Wed Jan 25 09:18:43 2012] fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src93_1.ximg exists
[Wed Jan 25 09:18:43 2012] Fit fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src93 appears to have run properly
[Wed Jan 25 22:38:19 2012] Source 99 is offset by 5.570605 and 3.730145 pixels which is larger than
2 X fitted extent = 1.241830 x 1.241830, not incorporating fit results
[Wed Jan 25 22:38:19 2012] Spatial fit model total counts = 1563.600000, observed total counts = 1570.000000
[Wed Jan 25 22:38:19 2012] Offset between fit and detection position for source 99 = 8.041202 pixels
[Wed Jan 25 22:38:19 2012] 1577.930000 total counts/ 865.191000 bgd. counts: snr = 24.231178
Spatial fit parameters:
  Offset between fit and detection position for source 99 = 8.041202 pixels
  Position = (404.7, 364.8) = 0 42 9.45 41 19 33.7
  Extent = 22.2 (22.2-44.5)", rotation angle = 0
  Source counts = 712.7 +/- 39.7
  Background counts = 865.2
  Rate = 0.01 +/- 0.0007
[Wed Jan 25 22:38:19 2012] Vigneting correction estimate = 1.000000
[Wed Jan 25 22:38:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 25 22:38:19 2012] Assessing source extent using major axis lower bound
[Wed Jan 25 22:38:19 2012] Source does appear to be extended
[Wed Jan 25 22:38:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 25 22:39:26 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jan 25 22:39:26 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jan 25 22:39:26 2012] Initial guess for spatial extent in simple fitting = 22.25"
[Wed Jan 25 22:39:26 2012] source mask rpix=5.1, npix_max = 126, mask sum = 121, frac = 0.960
[Wed Jan 25 22:39:26 2012] Giving source the simple spatial ID 82 for pass 1, mean size = 22.25"
[Thu Jan 26 13:17:24 2012] fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_src82.ximg exists
[Thu Jan 26 13:17:24 2012] fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_src82_1.ximg exists
[Thu Jan 26 13:17:24 2012] Fit fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_src82 appears to have run properly
[Thu Jan 26 13:17:26 2012] fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src82.ximg exists
[Thu Jan 26 13:17:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src82.csv
[Thu Jan 26 13:17:26 2012] fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src82_1.ximg exists
[Thu Jan 26 13:17:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src82.csv
[Thu Jan 26 13:17:26 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src82_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src82.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jan 27 00:06:32 2012] Warning, spatial fit 82 centroid is now closest to src. 24
[Fri Jan 27 00:06:32 2012] Vigneting correction estimate = 1.000000
[Fri Jan 27 00:06:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan 27 00:06:32 2012] Assessing source extent using major axis lower bound
[Fri Jan 27 00:06:32 2012] Source does appear to be extended
[Fri Jan 27 00:06:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jan 27 00:06:32 2012] Source is confused with source 24
[Fri Jan 27 00:07:46 2012] XMMSAS src. selection expression = ellipse(35156.299400, 31685.242000, 1334.916038, 1334.916038, 0.000000, X, Y)
[Fri Jan 27 00:07:46 2012] Writing source region out to fullrun_pn_xmm0112570101_pi300-10000_pass1_cl_src99_src.reg
[Fri Jan 27 00:07:46 2012] Extracting stamp from image fullrun_pn_xmm0112570101_pi300-10000_cl_sm2.00.img.gz, (328, 288) - (481, 441)
[Fri Jan 27 00:07:46 2012] XMMSAS bgd. selection expression = annulus(35156.299400, 31685.242000, 2224.860064, 4449.720128, X, Y) && !ellipse(32128.487800, 26895.108600, 1255.005636, 1255.005636, 0.000000, X, Y) && !ellipse(30279.898400, 27817.838200, 1356.518439, 1356.518439, 0.000000, X, Y) && !ellipse(35931.380000, 33099.002000, 3559.776102, 2943.792085, 18.033000, X, Y) && !ellipse(31448.210785, 31277.279999, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34343.954000, 30534.022000, 414.956012, 414.956012, 0.000000, X, Y) && !ellipse(35554.209880, 30096.473200, 435.412013, 435.412013, 0.000000, X, Y) && !ellipse(35169.887482, 29526.338623, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34576.252136, 29783.305634, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33764.478600, 29013.362800, 413.439212, 413.439212, 0.000000, X, Y) && !ellipse(32471.461731, 27419.036560, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28118.868000, 26916.762000, 3525.240101, 3525.240101, 0.000000, X, Y) && !ellipse(38468.148071, 35882.353973, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39444.089050, 33696.510834, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33795.843520, 32830.814200, 417.220812, 417.220812, 0.000000, X, Y) && !ellipse(33876.155426, 29798.335754, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31796.155029, 29074.588043, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35623.052000, 29173.900000, 1690.832049, 1690.832049, 0.000000, X, Y) && !ellipse(34621.392944, 28388.326691, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32953.166000, 26689.092000, 1530.248044, 1530.248044, 0.000000, X, Y) && !ellipse(34998.584991, 26389.108215, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jan 27 00:07:46 2012] Writing fullrun_pn_xmm0112570101_pi300-10000_pass1_cl_src99.gif
[Fri Jan 27 03:32:54 2012] Mean detx,y = (5505.73, -6690.04) 
[Fri Jan 27 03:32:59 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jan 27 03:33:38 2012] Binned source spectrum to 10 counts/bin
[Fri Jan 27 03:33:39 2012] Setting source spectrum file to fullrun_pn_xmm0112570101_pi300-10000_pass1_cl_src99_src_b10.pi.gz
[Fri Jan 27 03:33:39 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112570101_pi300-10000_pass1_cl_src99_bgd.pi.gz
[Sat Jan 28 13:51:38 2012] Updating aperture counts using extracted products
[Sat Jan 28 13:51:38 2012] Error reading totcts from fullrun_pn_xmm0112570101_pi300-10000_pass1_cl_src99_src_b10.pi.gz
[Sat Jan 28 13:51:41 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jan 28 13:51:41 2012] Using photon index=1.80, rate=0.0117, arf fullrun_pn_xmm0112570101_pi300-10000_pass1_cl_src99.arf
[Sat Jan 28 13:51:41 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jan 28 13:51:42 2012] Updating source flux to 4e-14
[Sat Jan 28 14:07:25 2012] Flag b found in src. 99 procflags, skipping spectral fitting
[Sat Jan 28 14:07:25 2012] Flag c found in src. 99 procflags, skipping spectral fitting