[Wed Jan 25 01:01:40 2012] Detection parameters:
  Position = (281.1, 375.1) = 0 42 57.16 41 20 17.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 101.9 +/- 21.4
  Background counts = 160.4
  Rate = 0.003 +/- 0.0006

[Wed Jan 25 01:01:42 2012] Off-axis axis estimate = 5.70'
[Wed Jan 25 01:09:33 2012] Using EEF radius (= 9.28 ")to estimate initial spatial extent for simple fitting
[Wed Jan 25 01:09:33 2012] Initial guess for spatial extent in simple fitting = 9.28"
[Wed Jan 25 01:09:33 2012] source mask rpix=2.1, npix_max = 27, mask sum = 36, frac = 1.298
[Wed Jan 25 01:09:33 2012] Giving source the simple spatial ID 89 for pass 0, mean size = 9.28"
[Wed Jan 25 09:18:41 2012] fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_src89.ximg exists
[Wed Jan 25 09:18:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_src89.csv
[Wed Jan 25 09:18:41 2012] fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_src89_1.ximg exists
[Wed Jan 25 09:18:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_src89.csv
[Wed Jan 25 09:18:41 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_src89_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_src89.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan 25 09:18:43 2012] fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src89.ximg exists
[Wed Jan 25 09:18:43 2012] fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src89_1.ximg exists
[Wed Jan 25 09:18:43 2012] Fit fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src89 appears to have run properly
[Wed Jan 25 22:38:19 2012] Spatial fit model total counts = 2085.850000, observed total counts = 2086.000000
[Wed Jan 25 22:38:19 2012] Offset between fit and detection position for source 95 = 5.379068 pixels
[Wed Jan 25 22:38:19 2012] 2110.181000 total counts/ 1716.040000 bgd. counts: snr = 9.514543
Spatial fit parameters:
  Offset between fit and detection position for source 95 = 5.379068 pixels
  Position = (277.7, 371.0) = 0 42 58.49 41 20 1.2
  Extent = 18.6 (14.7-37.1)", rotation angle = 0
  Source counts = 394.1 +/- 45.9
  Background counts = 1716.0
  Rate = 0.006 +/- 0.0008
[Wed Jan 25 22:38:19 2012] Vigneting correction estimate = 1.000000
[Wed Jan 25 22:38:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 25 22:38:19 2012] Assessing source extent using major axis lower bound
[Wed Jan 25 22:38:19 2012] Source does appear to be extended
[Wed Jan 25 22:38:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 25 22:38:19 2012] Source is confused with source 32
[Wed Jan 25 22:39:26 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jan 25 22:39:26 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jan 25 22:39:26 2012] Initial guess for spatial extent in simple fitting = 18.55"
[Wed Jan 25 22:39:26 2012] source mask rpix=4.3, npix_max = 90, mask sum = 90, frac = 0.991
[Wed Jan 25 22:39:26 2012] Giving source the simple spatial ID 79 for pass 1, mean size = 18.55"
[Thu Jan 26 13:17:24 2012] fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_src79.ximg exists
[Thu Jan 26 13:17:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_src79.csv
[Thu Jan 26 13:17:24 2012] fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_src79_1.ximg exists
[Thu Jan 26 13:17:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_src79.csv
[Thu Jan 26 13:17:24 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_src79_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_src79.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 26 13:17:26 2012] fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src79.ximg exists
[Thu Jan 26 13:17:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src79.csv
[Thu Jan 26 13:17:26 2012] fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src79_1.ximg exists
[Thu Jan 26 13:17:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src79.csv
[Thu Jan 26 13:17:26 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src79_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src79.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jan 27 00:06:32 2012] Source 95 is offset by 5.103448 and 3.389379 pixels which is larger than
2 X fitted extent = 0.553913 x 0.553913, not incorporating fit results
[Fri Jan 27 00:06:32 2012] Vigneting correction estimate = 1.000000
[Fri Jan 27 00:06:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan 27 00:06:32 2012] Assessing source extent using major axis lower bound
[Fri Jan 27 00:06:32 2012] Source does appear to be extended
[Fri Jan 27 00:06:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jan 27 00:07:46 2012] XMMSAS src. selection expression = ellipse(24108.978000, 32224.854000, 1113.282032, 1113.282032, 0.000000, X, Y)
[Fri Jan 27 00:07:46 2012] Writing source region out to fullrun_pn_xmm0112570101_pi300-10000_pass1_cl_src95_src.reg
[Fri Jan 27 00:07:46 2012] Extracting stamp from image fullrun_pn_xmm0112570101_pi300-10000_cl_sm2.00.img.gz, (214, 307) - (342, 435)
[Fri Jan 27 00:07:46 2012] XMMSAS bgd. selection expression = annulus(24108.978000, 32224.854000, 1855.470053, 3710.940107, X, Y) && !ellipse(24910.917600, 27465.106400, 1416.256841, 1114.603232, 107.584500, X, Y) && !ellipse(26685.723800, 27909.219800, 1828.219253, 1426.192841, 58.751000, X, Y) && !ellipse(26701.200000, 27881.222400, 3523.032101, 3523.032101, 0.000000, X, Y) && !ellipse(22495.467080, 28647.111200, 438.346413, 438.346413, 0.000000, X, Y) && !ellipse(25435.199400, 30883.062000, 355.937610, 355.937610, 0.000000, X, Y) && !ellipse(23032.663932, 33820.486188, 511.653510, 369.902039, 319.870306, X, Y) && !ellipse(23850.432000, 31375.805200, 435.393613, 435.393613, 0.000000, X, Y) && !ellipse(21549.131200, 31003.910200, 448.438413, 448.438413, 0.000000, X, Y) && !ellipse(28224.456140, 30691.908000, 407.699212, 407.699212, 0.000000, X, Y) && !ellipse(24812.838000, 30492.436000, 414.856812, 414.856812, 0.000000, X, Y) && !ellipse(22936.289760, 29958.598800, 403.184812, 279.389608, 19.120900, X, Y) && !ellipse(27109.332360, 28857.898000, 1249.752036, 1249.752036, 0.000000, X, Y) && !ellipse(27876.248000, 29080.346000, 2336.824067, 2336.824067, 0.000000, X, Y) && !ellipse(27705.830170, 27190.069489, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(28118.868000, 26916.762000, 3525.240101, 3525.240101, 0.000000, X, Y) && !ellipse(27918.659973, 33496.966797, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22085.417236, 32568.006561, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22331.960602, 31288.930267, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27031.076600, 30986.086000, 1340.856039, 1340.856039, 0.000000, X, Y) && !ellipse(26830.514000, 30280.486000, 1354.816039, 1354.816039, 0.000000, X, Y) && !ellipse(24346.334000, 30209.696000, 1342.408039, 1342.408039, 0.000000, X, Y) && !ellipse(21022.995000, 29965.432000, 741.812021, 741.812021, 0.000000, X, Y) && !ellipse(22132.344879, 29700.354553, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24726.604140, 29502.123200, 658.736019, 658.736019, 0.000000, X, Y) && !ellipse(23958.500580, 28978.393677, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23742.046661, 28585.773254, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24331.552000, 28416.186000, 676.592019, 676.592019, 0.000000, X, Y) && !ellipse(20520.962463, 28392.659698, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jan 27 00:07:46 2012] Writing fullrun_pn_xmm0112570101_pi300-10000_pass1_cl_src95.gif
[Fri Jan 27 03:30:06 2012] Mean detx,y = (-4850.35, -3304.86) 
[Fri Jan 27 03:30:12 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jan 27 03:30:39 2012] Binned source spectrum to 10 counts/bin
[Fri Jan 27 03:30:39 2012] Setting source spectrum file to fullrun_pn_xmm0112570101_pi300-10000_pass1_cl_src95_src_b10.pi.gz
[Fri Jan 27 03:30:39 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112570101_pi300-10000_pass1_cl_src95_bgd.pi.gz
[Sat Jan 28 13:51:38 2012] Updating aperture counts using extracted products
[Sat Jan 28 13:51:38 2012] Error reading totcts from fullrun_pn_xmm0112570101_pi300-10000_pass1_cl_src95_src_b10.pi.gz
[Sat Jan 28 13:51:41 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jan 28 13:51:41 2012] Using photon index=1.80, rate=0.00645, arf fullrun_pn_xmm0112570101_pi300-10000_pass1_cl_src95.arf
[Sat Jan 28 13:51:41 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jan 28 13:51:41 2012] Updating source flux to 2.1e-14
[Sat Jan 28 14:07:25 2012] Flag b found in src. 95 procflags, skipping spectral fitting
[Sat Jan 28 14:07:25 2012] Flag c found in src. 95 procflags, skipping spectral fitting