[Wed Jan 25 01:01:40 2012] Detection parameters:
  Position = (356.3, 232.8) = 0 42 28.18 41 9 59.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 4048.3 +/- 77.9
  Background counts = 129.9
  Rate = 0.1 +/- 0.002

[Wed Jan 25 01:01:42 2012] Off-axis axis estimate = 6.34'
[Wed Jan 25 01:09:33 2012] Using EEF radius (= 9.60 ")to estimate initial spatial extent for simple fitting
[Wed Jan 25 01:09:33 2012] Initial guess for spatial extent in simple fitting = 9.60"
[Wed Jan 25 01:09:33 2012] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.024
[Wed Jan 25 01:09:33 2012] Giving source the simple spatial ID 68 for pass 0, mean size = 9.60"
[Wed Jan 25 09:18:41 2012] fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_src68.ximg exists
[Wed Jan 25 09:18:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_src68.csv
[Wed Jan 25 09:18:41 2012] fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_src68_1.ximg exists
[Wed Jan 25 09:18:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_src68.csv
[Wed Jan 25 09:18:41 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_src68_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_src68.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan 25 09:18:42 2012] fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src68.ximg exists
[Wed Jan 25 09:18:42 2012] fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src68_1.ximg exists
[Wed Jan 25 09:18:42 2012] Fit fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src68 appears to have run properly
[Wed Jan 25 22:38:19 2012] Warning: source 68 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 73 at 13.129284 pixels away
[Wed Jan 25 22:38:19 2012] Vigneting correction estimate = 1.000000
[Wed Jan 25 22:38:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 25 22:38:19 2012] Assessing source extent using major
[Wed Jan 25 22:38:19 2012] Source does appear to be extended
[Wed Jan 25 22:38:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 25 22:39:26 2012] Using EEF radius (= 9.60 ")to estimate initial spatial extent for simple fitting
[Wed Jan 25 22:39:26 2012] Initial guess for spatial extent in simple fitting = 9.60"
[Wed Jan 25 22:39:26 2012] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.024
[Wed Jan 25 22:39:26 2012] Giving source the simple spatial ID 66 for pass 1, mean size = 9.60"
[Thu Jan 26 13:17:24 2012] fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_src66.ximg exists
[Thu Jan 26 13:17:24 2012] fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_src66_1.ximg exists
[Thu Jan 26 13:17:24 2012] Fit fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_src66 appears to have run properly
[Thu Jan 26 13:17:26 2012] fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src66.ximg exists
[Thu Jan 26 13:17:26 2012] fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src66_1.ximg exists
[Thu Jan 26 13:17:26 2012] Fit fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src66 appears to have run properly
[Fri Jan 27 00:06:32 2012] Spatial fit model total counts = 4907.880000, observed total counts = 4908.000000
[Fri Jan 27 00:06:32 2012] Offset between fit and detection position for source 73 = 0.077977 pixels
[Fri Jan 27 00:06:32 2012] 4948.040000 total counts/ 2016.030000 bgd. counts: snr = 65.300567
Spatial fit parameters:
  Offset between fit and detection position for source 73 = 0.077977 pixels
  Position = (356.3, 232.8) = 0 42 28.20 41 9 60.0
  Extent = 6.1 (5.8-6.3)" x 5.0 (4.8-5.3)", rotation angle = 161 (153-170) degrees
  Source counts = 2932.0 +/- 70.3
  Background counts = 2016.0
  Rate = 0.05 +/- 0.001
[Fri Jan 27 00:06:32 2012] Vigneting correction estimate = 1.000000
[Fri Jan 27 00:06:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan 27 00:06:32 2012] Assessing source extent using major axis lower bound
[Fri Jan 27 00:06:32 2012] Source does appear to be extended
[Fri Jan 27 00:06:32 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.10
[Fri Jan 27 00:07:46 2012] Counts = 2932.010000, rescaling region sizes by 2.000000
[Fri Jan 27 00:07:46 2012] XMMSAS src. selection expression = ellipse(30945.332800, 20203.676600, 728.312421, 605.988017, 160.945100, X, Y)
[Fri Jan 27 00:07:46 2012] Writing source region out to fullrun_pn_xmm0112570101_pi300-10000_pass1_cl_src73_src.reg
[Fri Jan 27 00:07:46 2012] Extracting stamp from image fullrun_pn_xmm0112570101_pi300-10000_cl_sm2.00.img.gz, (314, 191) - (398, 275)
[Fri Jan 27 00:07:46 2012] XMMSAS bgd. selection expression = annulus(30945.332800, 20203.676600, 2427.708070, 4855.416140, X, Y) && !ellipse(26701.200000, 27881.222400, 3523.032101, 3523.032101, 0.000000, X, Y) && !ellipse(30922.368766, 23063.290200, 409.550412, 409.550412, 0.000000, X, Y) && !ellipse(27705.830170, 27190.069489, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(28118.868000, 26916.762000, 3525.240101, 3525.240101, 0.000000, X, Y) && !ellipse(32445.705292, 25352.274139, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33106.188260, 25033.424000, 419.917612, 419.917612, 0.000000, X, Y) && !ellipse(31596.296000, 24623.751000, 307.988809, 307.988809, 0.000000, X, Y) && !ellipse(28136.355900, 24343.151000, 355.780810, 355.780810, 0.000000, X, Y) && !ellipse(30232.233917, 23939.795898, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27539.293460, 24184.015400, 380.317611, 380.317611, 0.000000, X, Y) && !ellipse(32257.912415, 24476.682648, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33896.046360, 23295.019400, 377.620011, 377.620011, 0.000000, X, Y) && !ellipse(33169.896240, 23072.169800, 422.608812, 422.608812, 0.000000, X, Y) && !ellipse(27194.565060, 22154.671800, 422.000812, 422.000812, 0.000000, X, Y) && !ellipse(34643.987244, 21142.320297, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29788.517456, 25796.327789, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31065.926392, 25179.243225, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30850.834503, 24648.550659, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25510.710358, 24495.137756, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29031.281860, 24846.830902, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29658.633423, 24339.253021, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31295.400574, 23879.842682, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25652.284485, 23883.501312, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28630.303406, 23789.438934, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34839.280579, 23555.198975, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26681.052582, 22459.617065, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31319.978180, 23075.501556, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36007.336823, 22050.281906, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26046.936005, 21533.861450, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26432.730347, 21280.936722, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28139.908875, 20862.077972, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35612.446350, 20752.706696, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36472.521851, 19551.198410, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28738.766663, 14726.359695, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jan 27 00:07:46 2012] Writing fullrun_pn_xmm0112570101_pi300-10000_pass1_cl_src73.gif
[Fri Jan 27 03:12:46 2012] Mean detx,y = (5626.54, 5126.47) 
[Fri Jan 27 03:12:51 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jan 27 03:13:48 2012] Binned source spectrum to 10 counts/bin
[Fri Jan 27 03:13:48 2012] Setting source spectrum file to fullrun_pn_xmm0112570101_pi300-10000_pass1_cl_src73_src_b10.pi.gz
[Fri Jan 27 03:13:48 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112570101_pi300-10000_pass1_cl_src73_bgd.pi.gz
[Sat Jan 28 13:51:38 2012] Updating aperture counts using extracted products
[Sat Jan 28 13:51:38 2012] Error reading totcts from fullrun_pn_xmm0112570101_pi300-10000_pass1_cl_src73_src_b10.pi.gz
[Sat Jan 28 13:51:41 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jan 28 13:51:41 2012] Using photon index=1.80, rate=0.048, arf fullrun_pn_xmm0112570101_pi300-10000_pass1_cl_src73.arf
[Sat Jan 28 13:51:41 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jan 28 13:51:41 2012] Updating source flux to 1.6e-13