[Wed Jan 25 01:01:40 2012] Detection parameters:
  Position = (279.1, 247.3) = 0 42 57.91 41 11 4.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 6470.8 +/- 98.8
  Background counts = 154.0
  Rate = 0.2 +/- 0.002

[Wed Jan 25 01:01:42 2012] Off-axis axis estimate = 3.96'
[Wed Jan 25 01:09:33 2012] Using EEF radius (= 8.41 ")to estimate initial spatial extent for simple fitting
[Wed Jan 25 01:09:33 2012] Initial guess for spatial extent in simple fitting = 8.41"
[Wed Jan 25 01:09:33 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.056
[Wed Jan 25 01:09:33 2012] Giving source the simple spatial ID 65 for pass 0, mean size = 8.41"
[Wed Jan 25 09:18:41 2012] fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_src65.ximg exists
[Wed Jan 25 09:18:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_src65.csv
[Wed Jan 25 09:18:41 2012] fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_src65_1.ximg exists
[Wed Jan 25 09:18:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_src65.csv
[Wed Jan 25 09:18:41 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_src65_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_src65.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan 25 09:18:42 2012] fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src65.ximg exists
[Wed Jan 25 09:18:42 2012] fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src65_1.ximg exists
[Wed Jan 25 09:18:42 2012] Fit fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src65 appears to have run properly
[Wed Jan 25 22:38:19 2012] Spatial fit model total counts = 7434.480000, observed total counts = 7449.000000
[Wed Jan 25 22:38:19 2012] Offset between fit and detection position for source 70 = 0.223423 pixels
[Wed Jan 25 22:38:19 2012] 7499.420000 total counts/ 2917.690000 bgd. counts: snr = 84.822276
Spatial fit parameters:
  Offset between fit and detection position for source 70 = 0.223423 pixels
  Position = (279.2, 247.5) = 0 42 57.90 41 11 4.2
  Extent = 5.7 (5.5-5.8)", rotation angle = 0
  Source counts = 4581.7 +/- 86.6
  Background counts = 2917.7
  Rate = 0.08 +/- 0.001
[Wed Jan 25 22:38:19 2012] Vigneting correction estimate = 1.000000
[Wed Jan 25 22:38:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 25 22:38:19 2012] Assessing source extent using major axis lower bound
[Wed Jan 25 22:38:19 2012] Source does appear to be extended
[Wed Jan 25 22:38:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 25 22:39:26 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jan 25 22:39:26 2012] Initial guess for spatial extent in simple fitting = 5.67"
[Wed Jan 25 22:39:26 2012] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.923
[Wed Jan 25 22:39:26 2012] Giving source the simple spatial ID 63 for pass 1, mean size = 5.67"
[Thu Jan 26 13:17:23 2012] fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_src63.ximg exists
[Thu Jan 26 13:17:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_src63.csv
[Thu Jan 26 13:17:24 2012] fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_src63_1.ximg exists
[Thu Jan 26 13:17:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_src63.csv
[Thu Jan 26 13:17:24 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_src63_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 26 13:17:26 2012] fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src63.ximg exists
[Thu Jan 26 13:17:26 2012] fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src63_1.ximg exists
[Thu Jan 26 13:17:26 2012] Fit fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src63 appears to have run properly
[Fri Jan 27 00:06:32 2012] Spatial fit model total counts = 7449.010000, observed total counts = 7449.000000
[Fri Jan 27 00:06:32 2012] Offset between fit and detection position for source 70 = 0.001352 pixels
[Fri Jan 27 00:06:32 2012] 7514.200000 total counts/ 2923.690000 bgd. counts: snr = 84.897573
Spatial fit parameters:
  Offset between fit and detection position for source 70 = 0.001352 pixels
  Position = (279.2, 247.5) = 0 42 57.90 41 11 4.2
  Extent = 5.7 (5.5-5.8)", rotation angle = 0
  Source counts = 4590.5 +/- 86.7
  Background counts = 2923.7
  Rate = 0.08 +/- 0.001
[Fri Jan 27 00:06:32 2012] Vigneting correction estimate = 1.000000
[Fri Jan 27 00:06:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan 27 00:06:32 2012] Assessing source extent using major axis lower bound
[Fri Jan 27 00:06:32 2012] Source does appear to be extended
[Fri Jan 27 00:06:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jan 27 00:07:45 2012] Counts = 4590.510000, rescaling region sizes by 2.000000
[Fri Jan 27 00:07:45 2012] XMMSAS src. selection expression = ellipse(24238.713060, 21485.494400, 679.177220, 679.177220, 0.000000, X, Y)
[Fri Jan 27 00:07:45 2012] Writing source region out to fullrun_pn_xmm0112570101_pi300-10000_pass1_cl_src70_src.reg
[Fri Jan 27 00:07:45 2012] Extracting stamp from image fullrun_pn_xmm0112570101_pi300-10000_cl_sm2.00.img.gz, (240, 208) - (318, 287)
[Fri Jan 27 00:07:45 2012] XMMSAS bgd. selection expression = annulus(24238.713060, 21485.494400, 2263.924065, 4527.848130, X, Y) && !ellipse(21379.838400, 26020.948000, 1446.573642, 1258.363236, 85.399710, X, Y) && !ellipse(26384.752940, 26646.930800, 1527.924044, 1527.924044, 0.000000, X, Y) && !ellipse(26701.200000, 27881.222400, 3523.032101, 3523.032101, 0.000000, X, Y) && !ellipse(27705.830170, 27190.069489, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(27173.956116, 26753.094147, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28118.868000, 26916.762000, 3525.240101, 3525.240101, 0.000000, X, Y) && !ellipse(24156.510010, 26764.555908, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27758.207200, 25903.679000, 328.548009, 328.548009, 0.000000, X, Y) && !ellipse(28136.355900, 24343.151000, 355.780810, 355.780810, 0.000000, X, Y) && !ellipse(28390.240800, 25569.234600, 352.993610, 352.993610, 0.000000, X, Y) && !ellipse(27539.293460, 24184.015400, 380.317611, 380.317611, 0.000000, X, Y) && !ellipse(21818.513800, 23563.185200, 417.008812, 417.008812, 0.000000, X, Y) && !ellipse(27194.565060, 22154.671800, 422.000812, 422.000812, 0.000000, X, Y) && !ellipse(23079.194400, 20496.926400, 361.964930, 361.964930, 0.000000, X, Y) && !ellipse(20505.719940, 17011.288528, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23937.520538, 26150.644104, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23596.420959, 26559.221252, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24070.048981, 25290.109283, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25510.710358, 24495.137756, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29031.281860, 24846.830902, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23535.665924, 24830.807800, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25652.284485, 23883.501312, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28630.303406, 23789.438934, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26681.052582, 22459.617065, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20267.910294, 21887.682602, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26046.936005, 21533.861450, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26432.730347, 21280.936722, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23261.409363, 21230.321243, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28139.908875, 20862.077972, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24984.194153, 17616.675034, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21649.318054, 17195.210373, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24803.625610, 17188.535629, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jan 27 00:07:45 2012] Writing fullrun_pn_xmm0112570101_pi300-10000_pass1_cl_src70.gif
[Fri Jan 27 03:07:13 2012] Mean detx,y = (-1116.89, 6204.72) 
[Fri Jan 27 03:07:18 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jan 27 03:08:01 2012] Binned source spectrum to 10 counts/bin
[Fri Jan 27 03:08:02 2012] Setting source spectrum file to fullrun_pn_xmm0112570101_pi300-10000_pass1_cl_src70_src_b10.pi.gz
[Fri Jan 27 03:08:02 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112570101_pi300-10000_pass1_cl_src70_bgd.pi.gz
[Sat Jan 28 13:51:38 2012] Updating aperture counts using extracted products
[Sat Jan 28 13:51:38 2012] Error reading totcts from fullrun_pn_xmm0112570101_pi300-10000_pass1_cl_src70_src_b10.pi.gz
[Sat Jan 28 13:51:41 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jan 28 13:51:41 2012] Using photon index=1.80, rate=0.0751, arf fullrun_pn_xmm0112570101_pi300-10000_pass1_cl_src70.arf
[Sat Jan 28 13:51:41 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jan 28 13:51:41 2012] Updating source flux to 2.5e-13