[Wed Jan 25 01:01:39 2012] Detection parameters:
  Position = (184.6, 279.8) = 0 43 34.37 41 13 23.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3572.6 +/- 73.3
  Background counts = 83.4
  Rate = 0.06 +/- 0.001

[Wed Jan 25 01:01:42 2012] Off-axis axis estimate = 8.37'
[Wed Jan 25 01:09:33 2012] Using EEF radius (= 10.61 ")to estimate initial spatial extent for simple fitting
[Wed Jan 25 01:09:33 2012] Initial guess for spatial extent in simple fitting = 10.61"
[Wed Jan 25 01:09:33 2012] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.042
[Wed Jan 25 01:09:33 2012] Giving source the simple spatial ID 59 for pass 0, mean size = 10.61"
[Wed Jan 25 09:18:41 2012] fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_src59.ximg exists
[Wed Jan 25 09:18:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_src59.csv
[Wed Jan 25 09:18:41 2012] fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_src59_1.ximg exists
[Wed Jan 25 09:18:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_src59.csv
[Wed Jan 25 09:18:41 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_src59_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan 25 09:18:42 2012] fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src59.ximg exists
[Wed Jan 25 09:18:42 2012] fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src59_1.ximg exists
[Wed Jan 25 09:18:42 2012] Fit fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src59 appears to have run properly
[Wed Jan 25 22:38:19 2012] Warning, spatial fit 59 centroid is now closest to src. 135
[Wed Jan 25 22:38:19 2012] Vigneting correction estimate = 1.000000
[Wed Jan 25 22:38:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 25 22:38:19 2012] Assessing source extent using major
[Wed Jan 25 22:38:19 2012] Source does appear to be extended
[Wed Jan 25 22:38:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 25 22:39:26 2012] Using EEF radius (= 10.61 ")to estimate initial spatial extent for simple fitting
[Wed Jan 25 22:39:26 2012] Initial guess for spatial extent in simple fitting = 10.61"
[Wed Jan 25 22:39:26 2012] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.042
[Wed Jan 25 22:39:26 2012] Giving source the simple spatial ID 57 for pass 1, mean size = 10.61"
[Thu Jan 26 13:17:23 2012] fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_src57.ximg exists
[Thu Jan 26 13:17:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_src57.csv
[Thu Jan 26 13:17:23 2012] fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_src57_1.ximg exists
[Thu Jan 26 13:17:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_src57.csv
[Thu Jan 26 13:17:23 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_src57_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_src57.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 26 13:17:26 2012] fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src57.ximg exists
[Thu Jan 26 13:17:26 2012] fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src57_1.ximg exists
[Thu Jan 26 13:17:26 2012] Fit fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src57 appears to have run properly
[Fri Jan 27 00:06:32 2012] Spatial fit model total counts = 4217.000000, observed total counts = 4217.000000
[Fri Jan 27 00:06:32 2012] Offset between fit and detection position for source 63 = 0.235743 pixels
[Fri Jan 27 00:06:32 2012] 4250.180000 total counts/ 1830.150000 bgd. counts: snr = 56.568857
Spatial fit parameters:
  Offset between fit and detection position for source 63 = 0.235743 pixels
  Position = (184.7, 279.5) = 0 43 34.33 41 13 23.0
  Extent = 5.7 (5.5-6.0)", rotation angle = 0
  Source counts = 2420.0 +/- 65.2
  Background counts = 1830.2
  Rate = 0.04 +/- 0.001
[Fri Jan 27 00:06:32 2012] Vigneting correction estimate = 1.000000
[Fri Jan 27 00:06:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan 27 00:06:32 2012] Assessing source extent using major axis lower bound
[Fri Jan 27 00:06:32 2012] Source does appear to be extended
[Fri Jan 27 00:06:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jan 27 00:07:45 2012] Counts = 2420.030000, rescaling region sizes by 2.000000
[Fri Jan 27 00:07:45 2012] XMMSAS src. selection expression = ellipse(16017.780600, 24272.008800, 688.948820, 688.948820, 0.000000, X, Y)
[Fri Jan 27 00:07:45 2012] Writing source region out to fullrun_pn_xmm0112570101_pi300-10000_pass1_cl_src63_src.reg
[Fri Jan 27 00:07:45 2012] Extracting stamp from image fullrun_pn_xmm0112570101_pi300-10000_cl_sm2.00.img.gz, (145, 240) - (224, 319)
[Fri Jan 27 00:07:45 2012] XMMSAS bgd. selection expression = annulus(16017.780600, 24272.008800, 2296.496066, 4592.992132, X, Y) && !ellipse(21379.838400, 26020.948000, 1446.573642, 1258.363236, 85.399710, X, Y) && !ellipse(15346.322311, 25876.735352, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19021.847961, 29612.454498, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11658.207840, 28563.824127, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16440.814331, 21004.795090, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18190.770691, 29162.581024, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20520.962463, 28392.659698, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13813.220779, 23263.777649, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11670.941360, 22661.123169, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20267.910294, 21887.682602, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jan 27 00:07:45 2012] Writing fullrun_pn_xmm0112570101_pi300-10000_pass1_cl_src63.gif
[Fri Jan 27 02:57:51 2012] Mean detx,y = (-9801.12, 6391.47) 
[Fri Jan 27 02:57:56 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jan 27 02:58:52 2012] Binned source spectrum to 10 counts/bin
[Fri Jan 27 02:58:53 2012] Setting source spectrum file to fullrun_pn_xmm0112570101_pi300-10000_pass1_cl_src63_src_b10.pi.gz
[Fri Jan 27 02:58:53 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112570101_pi300-10000_pass1_cl_src63_bgd.pi.gz
[Sat Jan 28 13:51:38 2012] Updating aperture counts using extracted products
[Sat Jan 28 13:51:38 2012] Error reading totcts from fullrun_pn_xmm0112570101_pi300-10000_pass1_cl_src63_src_b10.pi.gz
[Sat Jan 28 13:51:41 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jan 28 13:51:41 2012] Using photon index=1.80, rate=0.0396, arf fullrun_pn_xmm0112570101_pi300-10000_pass1_cl_src63.arf
[Sat Jan 28 13:51:41 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jan 28 13:51:41 2012] Updating source flux to 2.1e-13