[Wed Jan 25 01:01:39 2012] Detection parameters:
  Position = (323.9, 280.2) = 0 42 40.66 41 13 27.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1325.1 +/- 51.4
  Background counts = 256.6
  Rate = 0.02 +/- 0.001

[Wed Jan 25 01:01:42 2012] Off-axis axis estimate = 2.27'
[Wed Jan 25 01:09:33 2012] Using EEF radius (= 7.56 ")to estimate initial spatial extent for simple fitting
[Wed Jan 25 01:09:33 2012] Initial guess for spatial extent in simple fitting = 7.56"
[Wed Jan 25 01:09:33 2012] source mask rpix=1.7, npix_max = 20, mask sum = 16, frac = 0.798
[Wed Jan 25 01:09:33 2012] Giving source the simple spatial ID 56 for pass 0, mean size = 7.56"
[Wed Jan 25 09:18:40 2012] fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_src56.ximg exists
[Wed Jan 25 09:18:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_src56.csv
[Wed Jan 25 09:18:41 2012] fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_src56_1.ximg exists
[Wed Jan 25 09:18:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_src56.csv
[Wed Jan 25 09:18:41 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_src56_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_src56.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan 25 09:18:42 2012] fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src56.ximg exists
[Wed Jan 25 09:18:42 2012] fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src56_1.ximg exists
[Wed Jan 25 09:18:42 2012] Fit fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src56 appears to have run properly
[Wed Jan 25 22:38:19 2012] Spatial fit model total counts = 6555.490000, observed total counts = 6544.000000
[Wed Jan 25 22:38:19 2012] Offset between fit and detection position for source 59 = 0.148676 pixels
[Wed Jan 25 22:38:19 2012] 6540.077000 total counts/ 5983.500000 bgd. counts: snr = 7.195278
Spatial fit parameters:
  Offset between fit and detection position for source 59 = 0.148676 pixels
  Position = (324.0, 280.4) = 0 42 40.63 41 13 27.1
  Extent = 4.5 (4.1-4.8)", rotation angle = 0
  Source counts = 556.6 +/- 80.9
  Background counts = 5983.5
  Rate = 0.009 +/- 0.001
[Wed Jan 25 22:38:19 2012] Vigneting correction estimate = 1.000000
[Wed Jan 25 22:38:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 25 22:38:19 2012] Assessing source extent using major axis lower bound
[Wed Jan 25 22:38:19 2012] Source does appear to be extended
[Wed Jan 25 22:38:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 25 22:39:26 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jan 25 22:39:26 2012] Initial guess for spatial extent in simple fitting = 4.52"
[Wed Jan 25 22:39:26 2012] source mask rpix=1.0, npix_max = 9, mask sum = 12, frac = 1.267
[Wed Jan 25 22:39:26 2012] Giving source the simple spatial ID 54 for pass 1, mean size = 4.52"
[Thu Jan 26 13:17:23 2012] fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_src54.ximg exists
[Thu Jan 26 13:17:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_src54.csv
[Thu Jan 26 13:17:23 2012] fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_src54_1.ximg exists
[Thu Jan 26 13:17:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_src54.csv
[Thu Jan 26 13:17:23 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_src54_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 26 13:17:26 2012] fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src54.ximg exists
[Thu Jan 26 13:17:26 2012] fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src54_1.ximg exists
[Thu Jan 26 13:17:26 2012] Fit fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src54 appears to have run properly
[Fri Jan 27 00:06:32 2012] Spatial fit model total counts = 6546.600000, observed total counts = 6544.000000
[Fri Jan 27 00:06:32 2012] Offset between fit and detection position for source 59 = 0.004664 pixels
[Fri Jan 27 00:06:32 2012] 6530.795000 total counts/ 5980.090000 bgd. counts: snr = 7.121396
Spatial fit parameters:
  Offset between fit and detection position for source 59 = 0.004664 pixels
  Position = (324.0, 280.4) = 0 42 40.63 41 13 27.1
  Extent = 4.4 (4.1-4.7)", rotation angle = 0
  Source counts = 550.7 +/- 80.8
  Background counts = 5980.1
  Rate = 0.009 +/- 0.001
[Fri Jan 27 00:06:32 2012] Vigneting correction estimate = 1.000000
[Fri Jan 27 00:06:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan 27 00:06:32 2012] Assessing source extent using major axis lower bound
[Fri Jan 27 00:06:32 2012] Source does appear to be extended
[Fri Jan 27 00:06:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jan 27 00:07:45 2012] XMMSAS src. selection expression = ellipse(28136.355900, 24343.151000, 266.835608, 266.835608, 0.000000, X, Y)
[Fri Jan 27 00:07:45 2012] Writing source region out to fullrun_pn_xmm0112570101_pi300-10000_pass1_cl_src59_src.reg
[Fri Jan 27 00:07:45 2012] Extracting stamp from image fullrun_pn_xmm0112570101_pi300-10000_cl_sm2.00.img.gz, (309, 265) - (339, 296)
[Fri Jan 27 00:07:45 2012] XMMSAS bgd. selection expression = annulus(28136.355900, 24343.151000, 444.726013, 889.452026, X, Y) && !ellipse(26384.752940, 26646.930800, 1527.924044, 1527.924044, 0.000000, X, Y) && !ellipse(26701.200000, 27881.222400, 3523.032101, 3523.032101, 0.000000, X, Y) && !ellipse(27705.830170, 27190.069489, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(28118.868000, 26916.762000, 3525.240101, 3525.240101, 0.000000, X, Y) && !ellipse(28390.240800, 25569.234600, 352.993610, 352.993610, 0.000000, X, Y) && !ellipse(27539.293460, 24184.015400, 380.317611, 380.317611, 0.000000, X, Y) && !ellipse(29788.517456, 25796.327789, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29031.281860, 24846.830902, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29658.633423, 24339.253021, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28630.303406, 23789.438934, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jan 27 00:07:45 2012] Writing fullrun_pn_xmm0112570101_pi300-10000_pass1_cl_src59.gif
[Fri Jan 27 02:54:12 2012] Mean detx,y = (1557.36, 2193.15) 
[Fri Jan 27 02:54:15 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jan 27 02:54:30 2012] Binned source spectrum to 10 counts/bin
[Fri Jan 27 02:54:30 2012] Setting source spectrum file to fullrun_pn_xmm0112570101_pi300-10000_pass1_cl_src59_src_b10.pi.gz
[Fri Jan 27 02:54:30 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112570101_pi300-10000_pass1_cl_src59_bgd.pi.gz
[Sat Jan 28 13:51:38 2012] Updating aperture counts using extracted products
[Sat Jan 28 13:51:38 2012] Error reading totcts from fullrun_pn_xmm0112570101_pi300-10000_pass1_cl_src59_src_b10.pi.gz
[Sat Jan 28 13:51:41 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jan 28 13:51:41 2012] Using photon index=1.80, rate=0.00902, arf fullrun_pn_xmm0112570101_pi300-10000_pass1_cl_src59.arf
[Sat Jan 28 13:51:41 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jan 28 13:51:41 2012] Updating source flux to 3e-14