[Wed Jan 25 01:01:39 2012] Detection parameters:
  Position = (381.1, 288.2) = 0 42 18.59 41 14 1.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 9685.1 +/- 120.1
  Background counts = 158.8
  Rate = 0.2 +/- 0.003

[Wed Jan 25 01:01:42 2012] Off-axis axis estimate = 6.04'
[Wed Jan 25 01:09:33 2012] Using EEF radius (= 9.45 ")to estimate initial spatial extent for simple fitting
[Wed Jan 25 01:09:33 2012] Initial guess for spatial extent in simple fitting = 9.45"
[Wed Jan 25 01:09:33 2012] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.050
[Wed Jan 25 01:09:33 2012] Giving source the simple spatial ID 54 for pass 0, mean size = 9.45"
[Wed Jan 25 09:18:40 2012] fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_src54.ximg exists
[Wed Jan 25 09:18:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_src54.csv
[Wed Jan 25 09:18:40 2012] fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_src54_1.ximg exists
[Wed Jan 25 09:18:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_src54.csv
[Wed Jan 25 09:18:40 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_src54_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan 25 09:18:42 2012] fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src54.ximg exists
[Wed Jan 25 09:18:42 2012] fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src54_1.ximg exists
[Wed Jan 25 09:18:42 2012] Fit fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src54 appears to have run properly
[Wed Jan 25 22:38:19 2012] Spatial fit model total counts = 7558.750000, observed total counts = 7553.000000
[Wed Jan 25 22:38:19 2012] Offset between fit and detection position for source 57 = 0.366421 pixels
[Wed Jan 25 22:38:19 2012] Warning, changing simple spatial fit ID from 54 to 53
[Wed Jan 25 22:38:19 2012] 7323.280000 total counts/ 5540.500000 bgd. counts: snr = 23.950979
Spatial fit parameters:
  Offset between fit and detection position for source 57 = 0.366421 pixels
  Position = (381.4, 288.4) = 0 42 18.47 41 14 1.6
  Extent = 5.5 (5.2-5.7)", rotation angle = 0
  Source counts = 1782.8 +/- 85.6
  Background counts = 5540.5
  Rate = 0.03 +/- 0.001
[Wed Jan 25 22:38:19 2012] Spatial fit model total counts = 12664.500000, observed total counts = 12642.000000
[Wed Jan 25 22:38:19 2012] Offset between fit and detection position for source 57 = 0.337182 pixels
[Wed Jan 25 22:38:19 2012] Warning, changing simple spatial fit ID from 53 to 54
[Wed Jan 25 22:38:19 2012] 12217.300000 total counts/ 5807.140000 bgd. counts: snr = 84.117764
Spatial fit parameters:
  Offset between fit and detection position for source 57 = 0.337182 pixels
  Position = (381.1, 288.3) = 0 42 18.60 41 14 1.3
  Extent = 5.2 (5.1-5.4)", rotation angle = 0
  Source counts = 6410.2 +/- 110.5
  Background counts = 5807.1
  Rate = 0.1 +/- 0.002
[Wed Jan 25 22:38:19 2012] Vigneting correction estimate = 1.000000
[Wed Jan 25 22:38:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 25 22:38:19 2012] Assessing source extent using major axis lower bound
[Wed Jan 25 22:38:19 2012] Source does appear to be extended
[Wed Jan 25 22:38:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 25 22:39:26 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jan 25 22:39:26 2012] Initial guess for spatial extent in simple fitting = 5.24"
[Wed Jan 25 22:39:26 2012] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.032
[Wed Jan 25 22:39:26 2012] Giving source the simple spatial ID 52 for pass 1, mean size = 5.24"
[Thu Jan 26 13:17:23 2012] fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_src52.ximg exists
[Thu Jan 26 13:17:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_src52.csv
[Thu Jan 26 13:17:23 2012] fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_src52_1.ximg exists
[Thu Jan 26 13:17:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_src52.csv
[Thu Jan 26 13:17:23 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_src52_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_src52.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 26 13:17:25 2012] fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src52.ximg exists
[Thu Jan 26 13:17:25 2012] fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src52_1.ximg exists
[Thu Jan 26 13:17:25 2012] Fit fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src52 appears to have run properly
[Fri Jan 27 00:06:32 2012] Spatial fit model total counts = 7551.820000, observed total counts = 7553.000000
[Fri Jan 27 00:06:32 2012] Offset between fit and detection position for source 57 = 0.338917 pixels
[Fri Jan 27 00:06:32 2012] Warning, changing simple spatial fit ID from 52 to 51
[Fri Jan 27 00:06:32 2012] 7453.430000 total counts/ 5621.010000 bgd. counts: snr = 24.440937
Spatial fit parameters:
  Offset between fit and detection position for source 57 = 0.338917 pixels
  Position = (381.4, 288.4) = 0 42 18.47 41 14 1.6
  Extent = 5.6 (5.3-5.8)", rotation angle = 0
  Source counts = 1832.4 +/- 86.3
  Background counts = 5621.0
  Rate = 0.03 +/- 0.001
[Fri Jan 27 00:06:32 2012] Spatial fit model total counts = 12652.700000, observed total counts = 12642.000000
[Fri Jan 27 00:06:32 2012] Offset between fit and detection position for source 57 = 0.338840 pixels
[Fri Jan 27 00:06:32 2012] Warning, changing simple spatial fit ID from 51 to 52
[Fri Jan 27 00:06:32 2012] 12204.870000 total counts/ 5800.500000 bgd. counts: snr = 84.089873
Spatial fit parameters:
  Offset between fit and detection position for source 57 = 0.338840 pixels
  Position = (381.1, 288.3) = 0 42 18.60 41 14 1.3
  Extent = 5.2 (5.2-5.4)", rotation angle = 0
  Source counts = 6404.4 +/- 110.5
  Background counts = 5800.5
  Rate = 0.1 +/- 0.002
[Fri Jan 27 00:06:32 2012] Vigneting correction estimate = 1.000000
[Fri Jan 27 00:06:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan 27 00:06:32 2012] Assessing source extent using major axis lower bound
[Fri Jan 27 00:06:32 2012] Source does appear to be extended
[Fri Jan 27 00:06:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jan 27 00:07:44 2012] Counts = 6404.370000, rescaling region sizes by 2.000000
[Fri Jan 27 00:07:44 2012] XMMSAS src. selection expression = ellipse(33106.188260, 25033.424000, 629.876418, 629.876418, 0.000000, X, Y)
[Fri Jan 27 00:07:44 2012] Writing source region out to fullrun_pn_xmm0112570101_pi300-10000_pass1_cl_src57_src.reg
[Fri Jan 27 00:07:44 2012] Extracting stamp from image fullrun_pn_xmm0112570101_pi300-10000_cl_sm2.00.img.gz, (345, 252) - (417, 324)
[Fri Jan 27 00:07:44 2012] XMMSAS bgd. selection expression = annulus(33106.188260, 25033.424000, 2099.588060, 4199.176121, X, Y) && !ellipse(32128.487800, 26895.108600, 1255.005636, 1255.005636, 0.000000, X, Y) && !ellipse(28600.036000, 27448.894000, 867.300025, 867.300025, 0.000000, X, Y) && !ellipse(30279.898400, 27817.838200, 1356.518439, 1356.518439, 0.000000, X, Y) && !ellipse(26701.200000, 27881.222400, 3523.032101, 3523.032101, 0.000000, X, Y) && !ellipse(30922.368766, 23063.290200, 409.550412, 409.550412, 0.000000, X, Y) && !ellipse(35169.887482, 29526.338623, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34576.252136, 29783.305634, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33764.478600, 29013.362800, 413.439212, 413.439212, 0.000000, X, Y) && !ellipse(27876.248000, 29080.346000, 2336.824067, 2336.824067, 0.000000, X, Y) && !ellipse(29675.145050, 27781.968445, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32471.461731, 27419.036560, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27705.830170, 27190.069489, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(28118.868000, 26916.762000, 3525.240101, 3525.240101, 0.000000, X, Y) && !ellipse(32445.705292, 25352.274139, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31596.296000, 24623.751000, 307.988809, 307.988809, 0.000000, X, Y) && !ellipse(30232.233917, 23939.795898, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32257.912415, 24476.682648, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33896.046360, 23295.019400, 377.620011, 377.620011, 0.000000, X, Y) && !ellipse(33169.896240, 23072.169800, 422.608812, 422.608812, 0.000000, X, Y) && !ellipse(34643.987244, 21142.320297, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33876.155426, 29798.335754, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31796.155029, 29074.588043, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35623.052000, 29173.900000, 1690.832049, 1690.832049, 0.000000, X, Y) && !ellipse(34621.392944, 28388.326691, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28963.737915, 28006.652954, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32953.166000, 26689.092000, 1530.248044, 1530.248044, 0.000000, X, Y) && !ellipse(34998.584991, 26389.108215, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31173.301086, 26040.075409, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31937.458344, 26034.611359, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29788.517456, 25796.327789, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31065.926392, 25179.243225, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30850.834503, 24648.550659, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29031.281860, 24846.830902, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29658.633423, 24339.253021, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31295.400574, 23879.842682, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28630.303406, 23789.438934, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34839.280579, 23555.198975, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31319.978180, 23075.501556, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36007.336823, 22050.281906, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28139.908875, 20862.077972, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35612.446350, 20752.706696, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jan 27 00:07:44 2012] Writing fullrun_pn_xmm0112570101_pi300-10000_pass1_cl_src57.gif
[Fri Jan 27 02:52:05 2012] Mean detx,y = (5976.41, -140.15) 
[Fri Jan 27 02:52:10 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jan 27 02:52:42 2012] Binned source spectrum to 10 counts/bin
[Fri Jan 27 02:52:42 2012] Setting source spectrum file to fullrun_pn_xmm0112570101_pi300-10000_pass1_cl_src57_src_b10.pi.gz
[Fri Jan 27 02:52:42 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112570101_pi300-10000_pass1_cl_src57_bgd.pi.gz
[Sat Jan 28 13:51:38 2012] Updating aperture counts using extracted products
[Sat Jan 28 13:51:38 2012] Error reading totcts from fullrun_pn_xmm0112570101_pi300-10000_pass1_cl_src57_src_b10.pi.gz
[Sat Jan 28 13:51:41 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jan 28 13:51:41 2012] Using photon index=1.80, rate=0.105, arf fullrun_pn_xmm0112570101_pi300-10000_pass1_cl_src57.arf
[Sat Jan 28 13:51:41 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jan 28 13:51:41 2012] Updating source flux to 3.2e-13