[Wed Jan 25 01:01:39 2012] Detection parameters:
  Position = (319.7, 298.2) = 0 42 42.26 41 14 46.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 4285.3 +/- 86.9
  Background counts = 288.2
  Rate = 0.08 +/- 0.002

[Wed Jan 25 01:01:42 2012] Off-axis axis estimate = 1.54'
[Wed Jan 25 01:09:33 2012] Using EEF radius (= 7.20 ")to estimate initial spatial extent for simple fitting
[Wed Jan 25 01:09:33 2012] Initial guess for spatial extent in simple fitting = 7.20"
[Wed Jan 25 01:09:33 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.861
[Wed Jan 25 01:09:33 2012] Giving source the simple spatial ID 51 for pass 0, mean size = 7.20"
[Wed Jan 25 09:18:40 2012] fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_src51.ximg exists
[Wed Jan 25 09:18:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_src51.csv
[Wed Jan 25 09:18:40 2012] fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_src51_1.ximg exists
[Wed Jan 25 09:18:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_src51.csv
[Wed Jan 25 09:18:40 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_src51_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan 25 09:18:42 2012] fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src51.ximg exists
[Wed Jan 25 09:18:42 2012] fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src51_1.ximg exists
[Wed Jan 25 09:18:42 2012] Fit fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src51 appears to have run properly
[Wed Jan 25 22:38:19 2012] Warning, spatial fit 51 centroid is now closest to src. 51
[Wed Jan 25 22:38:19 2012] Spatial fit model total counts = 14440.200000, observed total counts = 14420.000000
[Wed Jan 25 22:38:19 2012] Offset between fit and detection position for source 54 = 0.091791 pixels
[Wed Jan 25 22:38:19 2012] Warning, changing simple spatial fit ID from 51 to 57
[Wed Jan 25 22:38:19 2012] 14615.630000 total counts/ 13316.800000 bgd. counts: snr = 11.255178
Spatial fit parameters:
  Offset between fit and detection position for source 54 = 0.091791 pixels
  Position = (319.7, 298.3) = 0 42 42.27 41 14 45.2
  Extent = 4.0 (3.7-4.2)", rotation angle = 0
  Source counts = 1298.8 +/- 120.9
  Background counts = 13316.8
  Rate = 0.02 +/- 0.002
[Wed Jan 25 22:38:19 2012] Vigneting correction estimate = 1.000000
[Wed Jan 25 22:38:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 25 22:38:19 2012] Assessing source extent using major axis lower bound
[Wed Jan 25 22:38:19 2012] Source does appear to be extended
[Wed Jan 25 22:38:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 25 22:39:26 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jan 25 22:39:26 2012] Initial guess for spatial extent in simple fitting = 4.00"
[Wed Jan 25 22:39:26 2012] source mask rpix=0.9, npix_max = 8, mask sum = 9, frac = 1.118
[Wed Jan 25 22:39:26 2012] Giving source the simple spatial ID 49 for pass 1, mean size = 4.00"
[Thu Jan 26 13:17:23 2012] fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_src49.ximg exists
[Thu Jan 26 13:17:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_src49.csv
[Thu Jan 26 13:17:23 2012] fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_src49_1.ximg exists
[Thu Jan 26 13:17:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_src49.csv
[Thu Jan 26 13:17:23 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_src49_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 26 13:17:25 2012] fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src49.ximg exists
[Thu Jan 26 13:17:25 2012] fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src49_1.ximg exists
[Thu Jan 26 13:17:25 2012] Fit fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src49 appears to have run properly
[Fri Jan 27 00:06:32 2012] Spatial fit model total counts = 17766.000000, observed total counts = 17756.000000
[Fri Jan 27 00:06:32 2012] Offset between fit and detection position for source 54 = 0.071031 pixels
[Fri Jan 27 00:06:32 2012] 18369.050000 total counts/ 17020.800000 bgd. counts: snr = 10.334285
Spatial fit parameters:
  Offset between fit and detection position for source 54 = 0.071031 pixels
  Position = (319.6, 298.3) = 0 42 42.30 41 14 45.1
  Extent = 4.1 (3.8-4.3)", rotation angle = 0
  Source counts = 1348.2 +/- 135.5
  Background counts = 17020.8
  Rate = 0.02 +/- 0.002
[Fri Jan 27 00:06:32 2012] Vigneting correction estimate = 1.000000
[Fri Jan 27 00:06:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan 27 00:06:32 2012] Assessing source extent using major axis lower bound
[Fri Jan 27 00:06:32 2012] Source does appear to be extended
[Fri Jan 27 00:06:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jan 27 00:07:44 2012] Counts = 1348.250000, rescaling region sizes by 2.000000
[Fri Jan 27 00:07:44 2012] XMMSAS src. selection expression = ellipse(27758.207200, 25903.679000, 492.822014, 492.822014, 0.000000, X, Y)
[Fri Jan 27 00:07:44 2012] Writing source region out to fullrun_pn_xmm0112570101_pi300-10000_pass1_cl_src54_src.reg
[Fri Jan 27 00:07:44 2012] Extracting stamp from image fullrun_pn_xmm0112570101_pi300-10000_cl_sm2.00.img.gz, (291, 270) - (348, 327)
[Fri Jan 27 00:07:44 2012] XMMSAS bgd. selection expression = annulus(27758.207200, 25903.679000, 1642.740047, 3285.480095, X, Y) && !ellipse(32128.487800, 26895.108600, 1255.005636, 1255.005636, 0.000000, X, Y) && !ellipse(28600.036000, 27448.894000, 867.300025, 867.300025, 0.000000, X, Y) && !ellipse(30279.898400, 27817.838200, 1356.518439, 1356.518439, 0.000000, X, Y) && !ellipse(24910.917600, 27465.106400, 1416.256841, 1114.603232, 107.584500, X, Y) && !ellipse(25465.799600, 26987.258800, 358.565610, 358.565610, 0.000000, X, Y) && !ellipse(26384.752940, 26646.930800, 1527.924044, 1527.924044, 0.000000, X, Y) && !ellipse(26685.723800, 27909.219800, 1828.219253, 1426.192841, 58.751000, X, Y) && !ellipse(26701.200000, 27881.222400, 3523.032101, 3523.032101, 0.000000, X, Y) && !ellipse(30922.368766, 23063.290200, 409.550412, 409.550412, 0.000000, X, Y) && !ellipse(23801.962708, 27445.321350, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27109.332360, 28857.898000, 1249.752036, 1249.752036, 0.000000, X, Y) && !ellipse(27876.248000, 29080.346000, 2336.824067, 2336.824067, 0.000000, X, Y) && !ellipse(29675.145050, 27781.968445, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27705.830170, 27190.069489, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(27173.956116, 26753.094147, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28118.868000, 26916.762000, 3525.240101, 3525.240101, 0.000000, X, Y) && !ellipse(24156.510010, 26764.555908, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28136.355900, 24343.151000, 355.780810, 355.780810, 0.000000, X, Y) && !ellipse(30232.233917, 23939.795898, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28390.240800, 25569.234600, 352.993610, 352.993610, 0.000000, X, Y) && !ellipse(27539.293460, 24184.015400, 380.317611, 380.317611, 0.000000, X, Y) && !ellipse(26830.514000, 30280.486000, 1354.816039, 1354.816039, 0.000000, X, Y) && !ellipse(24346.334000, 30209.696000, 1342.408039, 1342.408039, 0.000000, X, Y) && !ellipse(24726.604140, 29502.123200, 658.736019, 658.736019, 0.000000, X, Y) && !ellipse(23958.500580, 28978.393677, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31796.155029, 29074.588043, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23742.046661, 28585.773254, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24331.552000, 28416.186000, 676.592019, 676.592019, 0.000000, X, Y) && !ellipse(28963.737915, 28006.652954, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31173.301086, 26040.075409, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23937.520538, 26150.644104, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29788.517456, 25796.327789, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31065.926392, 25179.243225, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24070.048981, 25290.109283, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30850.834503, 24648.550659, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25510.710358, 24495.137756, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29031.281860, 24846.830902, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29658.633423, 24339.253021, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31295.400574, 23879.842682, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25652.284485, 23883.501312, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28630.303406, 23789.438934, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26681.052582, 22459.617065, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31319.978180, 23075.501556, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jan 27 00:07:44 2012] Writing fullrun_pn_xmm0112570101_pi300-10000_pass1_cl_src54.gif
[Fri Jan 27 02:47:45 2012] Mean detx,y = (660.84, 832.65) 
[Fri Jan 27 02:47:49 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jan 27 02:48:11 2012] Binned source spectrum to 10 counts/bin
[Fri Jan 27 02:48:11 2012] Setting source spectrum file to fullrun_pn_xmm0112570101_pi300-10000_pass1_cl_src54_src_b10.pi.gz
[Fri Jan 27 02:48:11 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112570101_pi300-10000_pass1_cl_src54_bgd.pi.gz
[Sat Jan 28 13:51:38 2012] Updating aperture counts using extracted products
[Sat Jan 28 13:51:38 2012] Error reading totcts from fullrun_pn_xmm0112570101_pi300-10000_pass1_cl_src54_src_b10.pi.gz
[Sat Jan 28 13:51:41 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jan 28 13:51:41 2012] Using photon index=1.80, rate=0.0221, arf fullrun_pn_xmm0112570101_pi300-10000_pass1_cl_src54.arf
[Sat Jan 28 13:51:41 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jan 28 13:51:41 2012] Updating source flux to 5.5e-14