[Wed Jan 25 01:01:38 2012] Detection parameters:
  Position = (293.3, 310.7) = 0 42 52.45 41 15 40.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 17435.6 +/- 158.3
  Background counts = 251.5
  Rate = 0.4 +/- 0.003

[Wed Jan 25 01:01:42 2012] Off-axis axis estimate = 0.96'
[Wed Jan 25 01:09:33 2012] Using EEF radius (= 6.91 ")to estimate initial spatial extent for simple fitting
[Wed Jan 25 01:09:33 2012] Initial guess for spatial extent in simple fitting = 6.91"
[Wed Jan 25 01:09:33 2012] source mask rpix=1.6, npix_max = 17, mask sum = 12, frac = 0.688
[Wed Jan 25 01:09:33 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 6.91"
[Wed Jan 25 09:18:40 2012] fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_src5.ximg exists
[Wed Jan 25 09:18:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_src5.csv
[Wed Jan 25 09:18:40 2012] fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_src5_1.ximg exists
[Wed Jan 25 09:18:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_src5.csv
[Wed Jan 25 09:18:40 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan 25 09:18:41 2012] fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Wed Jan 25 09:18:41 2012] fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Wed Jan 25 09:18:41 2012] Fit fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Wed Jan 25 22:38:19 2012] Spatial fit model total counts = 33168.600000, observed total counts = 33115.000000
[Wed Jan 25 22:38:19 2012] Offset between fit and detection position for source 5 = 0.099461 pixels
[Wed Jan 25 22:38:19 2012] 34365.010000 total counts/ 24542.700000 bgd. counts: snr = 62.697824
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.099461 pixels
  Position = (293.3, 310.8) = 0 42 52.46 41 15 39.3
  Extent = 4.5 (4.4-4.6)", rotation angle = 0
  Source counts = 9822.3 +/- 185.4
  Background counts = 24542.7
  Rate = 0.2 +/- 0.003
[Wed Jan 25 22:38:19 2012] Vigneting correction estimate = 1.000000
[Wed Jan 25 22:38:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 25 22:38:19 2012] Assessing source extent using major axis lower bound
[Wed Jan 25 22:38:19 2012] Source does appear to be extended
[Wed Jan 25 22:38:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 25 22:39:26 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jan 25 22:39:26 2012] Initial guess for spatial extent in simple fitting = 4.48"
[Wed Jan 25 22:39:26 2012] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.961
[Wed Jan 25 22:39:26 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 4.48"
[Thu Jan 26 13:17:22 2012] fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_src5.ximg exists
[Thu Jan 26 13:17:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_src5.csv
[Thu Jan 26 13:17:22 2012] fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_src5_1.ximg exists
[Thu Jan 26 13:17:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_src5.csv
[Thu Jan 26 13:17:22 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 26 13:17:24 2012] fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Thu Jan 26 13:17:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src5.csv
[Thu Jan 26 13:17:24 2012] fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Thu Jan 26 13:17:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src5.csv
[Thu Jan 26 13:17:24 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jan 27 00:06:32 2012] Warning, spatial fit 5 centroid is now closest to src. 53
[Fri Jan 27 00:06:32 2012] Vigneting correction estimate = 1.000000
[Fri Jan 27 00:06:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan 27 00:06:32 2012] Assessing source extent using major axis lower bound
[Fri Jan 27 00:06:32 2012] Source does appear to be extended
[Fri Jan 27 00:06:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jan 27 00:07:38 2012] Counts = 9822.310000, rescaling region sizes by 2.000000
[Fri Jan 27 00:07:38 2012] XMMSAS src. selection expression = ellipse(25465.799600, 26987.258800, 537.848415, 537.848415, 0.000000, X, Y)
[Fri Jan 27 00:07:38 2012] Writing source region out to fullrun_pn_xmm0112570101_pi300-10000_pass1_cl_src5_src.reg
[Fri Jan 27 00:07:38 2012] Extracting stamp from image fullrun_pn_xmm0112570101_pi300-10000_cl_sm2.00.img.gz, (262, 280) - (324, 342)
[Fri Jan 27 00:07:38 2012] XMMSAS bgd. selection expression = annulus(25465.799600, 26987.258800, 1792.828052, 3585.656103, X, Y) && !ellipse(28600.036000, 27448.894000, 867.300025, 867.300025, 0.000000, X, Y) && !ellipse(30279.898400, 27817.838200, 1356.518439, 1356.518439, 0.000000, X, Y) && !ellipse(24910.917600, 27465.106400, 1416.256841, 1114.603232, 107.584500, X, Y) && !ellipse(23046.748000, 26901.632000, 379.982411, 379.982411, 0.000000, X, Y) && !ellipse(21379.838400, 26020.948000, 1446.573642, 1258.363236, 85.399710, X, Y) && !ellipse(26384.752940, 26646.930800, 1527.924044, 1527.924044, 0.000000, X, Y) && !ellipse(26685.723800, 27909.219800, 1828.219253, 1426.192841, 58.751000, X, Y) && !ellipse(26701.200000, 27881.222400, 3523.032101, 3523.032101, 0.000000, X, Y) && !ellipse(22495.467080, 28647.111200, 438.346413, 438.346413, 0.000000, X, Y) && !ellipse(25435.199400, 30883.062000, 355.937610, 355.937610, 0.000000, X, Y) && !ellipse(23801.962708, 27445.321350, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21549.131200, 31003.910200, 448.438413, 448.438413, 0.000000, X, Y) && !ellipse(28224.456140, 30691.908000, 407.699212, 407.699212, 0.000000, X, Y) && !ellipse(24812.838000, 30492.436000, 414.856812, 414.856812, 0.000000, X, Y) && !ellipse(22936.289760, 29958.598800, 403.184812, 279.389608, 19.120900, X, Y) && !ellipse(27109.332360, 28857.898000, 1249.752036, 1249.752036, 0.000000, X, Y) && !ellipse(27876.248000, 29080.346000, 2336.824067, 2336.824067, 0.000000, X, Y) && !ellipse(29675.145050, 27781.968445, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22824.994232, 27420.417175, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27705.830170, 27190.069489, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(27173.956116, 26753.094147, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28118.868000, 26916.762000, 3525.240101, 3525.240101, 0.000000, X, Y) && !ellipse(24156.510010, 26764.555908, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27758.207200, 25903.679000, 328.548009, 328.548009, 0.000000, X, Y) && !ellipse(28136.355900, 24343.151000, 355.780810, 355.780810, 0.000000, X, Y) && !ellipse(28390.240800, 25569.234600, 352.993610, 352.993610, 0.000000, X, Y) && !ellipse(27539.293460, 24184.015400, 380.317611, 380.317611, 0.000000, X, Y) && !ellipse(21818.513800, 23563.185200, 417.008812, 417.008812, 0.000000, X, Y) && !ellipse(22331.960602, 31288.930267, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27031.076600, 30986.086000, 1340.856039, 1340.856039, 0.000000, X, Y) && !ellipse(26830.514000, 30280.486000, 1354.816039, 1354.816039, 0.000000, X, Y) && !ellipse(24346.334000, 30209.696000, 1342.408039, 1342.408039, 0.000000, X, Y) && !ellipse(22132.344879, 29700.354553, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24726.604140, 29502.123200, 658.736019, 658.736019, 0.000000, X, Y) && !ellipse(23958.500580, 28978.393677, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23742.046661, 28585.773254, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24331.552000, 28416.186000, 676.592019, 676.592019, 0.000000, X, Y) && !ellipse(28963.737915, 28006.652954, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22008.084198, 26922.527496, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23937.520538, 26150.644104, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23596.420959, 26559.221252, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29788.517456, 25796.327789, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24070.048981, 25290.109283, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25510.710358, 24495.137756, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29031.281860, 24846.830902, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23535.665924, 24830.807800, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29658.633423, 24339.253021, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25652.284485, 23883.501312, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28630.303406, 23789.438934, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jan 27 00:07:38 2012] Writing fullrun_pn_xmm0112570101_pi300-10000_pass1_cl_src5.gif
[Fri Jan 27 00:20:49 2012] Mean detx,y = (-1807.08, 607.81) 
[Fri Jan 27 00:20:54 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jan 27 00:21:15 2012] Binned source spectrum to 10 counts/bin
[Fri Jan 27 00:21:15 2012] Setting source spectrum file to fullrun_pn_xmm0112570101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Fri Jan 27 00:21:15 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112570101_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Sat Jan 28 13:51:37 2012] Updating aperture counts using extracted products
[Sat Jan 28 13:51:37 2012] Error reading totcts from fullrun_pn_xmm0112570101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sat Jan 28 13:51:40 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jan 28 13:51:40 2012] Using photon index=1.80, rate=0.161, arf fullrun_pn_xmm0112570101_pi300-10000_pass1_cl_src5.arf
[Sat Jan 28 13:51:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jan 28 13:51:40 2012] Updating source flux to 5.6e-13