[Wed Jan 25 01:01:39 2012] Detection parameters:
  Position = (388.8, 334.0) = 0 42 15.59 41 17 20.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1301.2 +/- 47.3
  Background counts = 123.5
  Rate = 0.03 +/- 0.001

[Wed Jan 25 01:01:42 2012] Off-axis axis estimate = 7.04'
[Wed Jan 25 01:09:33 2012] Using EEF radius (= 9.95 ")to estimate initial spatial extent for simple fitting
[Wed Jan 25 01:09:33 2012] Initial guess for spatial extent in simple fitting = 9.95"
[Wed Jan 25 01:09:33 2012] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.159
[Wed Jan 25 01:09:33 2012] Giving source the simple spatial ID 41 for pass 0, mean size = 9.95"
[Wed Jan 25 09:18:40 2012] fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_src41.ximg exists
[Wed Jan 25 09:18:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_src41.csv
[Wed Jan 25 09:18:40 2012] fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_src41_1.ximg exists
[Wed Jan 25 09:18:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_src41.csv
[Wed Jan 25 09:18:40 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_src41_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan 25 09:18:42 2012] fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src41.ximg exists
[Wed Jan 25 09:18:42 2012] fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src41_1.ximg exists
[Wed Jan 25 09:18:42 2012] Fit fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src41 appears to have run properly
[Wed Jan 25 22:38:19 2012] Spatial fit model total counts = 3007.240000, observed total counts = 3010.000000
[Wed Jan 25 22:38:19 2012] Offset between fit and detection position for source 44 = 0.155152 pixels
[Wed Jan 25 22:38:19 2012] 3034.661000 total counts/ 2215.370000 bgd. counts: snr = 17.406644
Spatial fit parameters:
  Offset between fit and detection position for source 44 = 0.155152 pixels
  Position = (388.6, 334.0) = 0 42 15.65 41 17 20.3
  Extent = 5.0 (4.7-5.4)", rotation angle = 0
  Source counts = 819.3 +/- 55.1
  Background counts = 2215.4
  Rate = 0.01 +/- 0.0009
[Wed Jan 25 22:38:19 2012] Vigneting correction estimate = 1.000000
[Wed Jan 25 22:38:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 25 22:38:19 2012] Assessing source extent using major axis lower bound
[Wed Jan 25 22:38:19 2012] Source does appear to be extended
[Wed Jan 25 22:38:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 25 22:39:26 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jan 25 22:39:26 2012] Initial guess for spatial extent in simple fitting = 5.03"
[Wed Jan 25 22:39:26 2012] source mask rpix=1.2, npix_max = 10, mask sum = 12, frac = 1.094
[Wed Jan 25 22:39:26 2012] Giving source the simple spatial ID 39 for pass 1, mean size = 5.03"
[Thu Jan 26 13:17:23 2012] fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_src39.ximg exists
[Thu Jan 26 13:17:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_src39.csv
[Thu Jan 26 13:17:23 2012] fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_src39_1.ximg exists
[Thu Jan 26 13:17:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_src39.csv
[Thu Jan 26 13:17:23 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_src39_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 26 13:17:25 2012] fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src39.ximg exists
[Thu Jan 26 13:17:25 2012] fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src39_1.ximg exists
[Thu Jan 26 13:17:25 2012] Fit fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src39 appears to have run properly
[Fri Jan 27 00:06:32 2012] Spatial fit model total counts = 3072.470000, observed total counts = 3072.000000
[Fri Jan 27 00:06:32 2012] Offset between fit and detection position for source 44 = 0.010608 pixels
[Fri Jan 27 00:06:32 2012] 2906.452000 total counts/ 2058.540000 bgd. counts: snr = 18.688357
Spatial fit parameters:
  Offset between fit and detection position for source 44 = 0.010608 pixels
  Position = (388.7, 334.0) = 0 42 15.65 41 17 20.3
  Extent = 5.2 (4.8-5.5)", rotation angle = 0
  Source counts = 847.9 +/- 53.9
  Background counts = 2058.5
  Rate = 0.01 +/- 0.0009
[Fri Jan 27 00:06:32 2012] Vigneting correction estimate = 1.000000
[Fri Jan 27 00:06:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan 27 00:06:32 2012] Assessing source extent using major axis lower bound
[Fri Jan 27 00:06:32 2012] Source does appear to be extended
[Fri Jan 27 00:06:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jan 27 00:07:42 2012] XMMSAS src. selection expression = ellipse(33764.478600, 29013.362800, 310.079409, 310.079409, 0.000000, X, Y)
[Fri Jan 27 00:07:42 2012] Writing source region out to fullrun_pn_xmm0112570101_pi300-10000_pass1_cl_src44_src.reg
[Fri Jan 27 00:07:42 2012] Extracting stamp from image fullrun_pn_xmm0112570101_pi300-10000_cl_sm2.00.img.gz, (371, 316) - (406, 352)
[Fri Jan 27 00:07:42 2012] XMMSAS bgd. selection expression = annulus(33764.478600, 29013.362800, 516.799015, 1033.598030, X, Y) && !ellipse(32128.487800, 26895.108600, 1255.005636, 1255.005636, 0.000000, X, Y) && !ellipse(35931.380000, 33099.002000, 3559.776102, 2943.792085, 18.033000, X, Y) && !ellipse(35169.887482, 29526.338623, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34576.252136, 29783.305634, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32471.461731, 27419.036560, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35156.299400, 31685.242000, 1779.888051, 1779.888051, 0.000000, X, Y) && !ellipse(33876.155426, 29798.335754, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35623.052000, 29173.900000, 1690.832049, 1690.832049, 0.000000, X, Y) && !ellipse(34621.392944, 28388.326691, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32953.166000, 26689.092000, 1530.248044, 1530.248044, 0.000000, X, Y)
[Fri Jan 27 00:07:42 2012] Writing fullrun_pn_xmm0112570101_pi300-10000_pass1_cl_src44.gif
[Fri Jan 27 02:05:10 2012] Mean detx,y = (5260.50, -4111.80) 
[Fri Jan 27 02:05:14 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jan 27 02:05:29 2012] Binned source spectrum to 10 counts/bin
[Fri Jan 27 02:05:30 2012] Setting source spectrum file to fullrun_pn_xmm0112570101_pi300-10000_pass1_cl_src44_src_b10.pi.gz
[Fri Jan 27 02:05:30 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112570101_pi300-10000_pass1_cl_src44_bgd.pi.gz
[Sat Jan 28 13:51:38 2012] Updating aperture counts using extracted products
[Sat Jan 28 13:51:38 2012] Error reading totcts from fullrun_pn_xmm0112570101_pi300-10000_pass1_cl_src44_src_b10.pi.gz
[Sat Jan 28 13:51:41 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jan 28 13:51:41 2012] Using photon index=1.80, rate=0.0139, arf fullrun_pn_xmm0112570101_pi300-10000_pass1_cl_src44.arf
[Sat Jan 28 13:51:41 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jan 28 13:51:41 2012] Updating source flux to 5.6e-14