[Wed Jan 25 01:01:39 2012] Detection parameters:
  Position = (409.4, 346.3) = 0 42 7.63 41 18 14.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 4706.1 +/- 83.4
  Background counts = 90.8
  Rate = 0.1 +/- 0.002

[Wed Jan 25 01:01:42 2012] Off-axis axis estimate = 8.76'
[Wed Jan 25 01:09:33 2012] Using EEF radius (= 10.81 ")to estimate initial spatial extent for simple fitting
[Wed Jan 25 01:09:33 2012] Initial guess for spatial extent in simple fitting = 10.81"
[Wed Jan 25 01:09:33 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.010
[Wed Jan 25 01:09:33 2012] Giving source the simple spatial ID 35 for pass 0, mean size = 10.81"
[Wed Jan 25 09:18:40 2012] fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_src35.ximg exists
[Wed Jan 25 09:18:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_src35.csv
[Wed Jan 25 09:18:40 2012] fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_src35_1.ximg exists
[Wed Jan 25 09:18:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_src35.csv
[Wed Jan 25 09:18:40 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_src35_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan 25 09:18:42 2012] fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src35.ximg exists
[Wed Jan 25 09:18:42 2012] fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src35_1.ximg exists
[Wed Jan 25 09:18:42 2012] Fit fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src35 appears to have run properly
[Wed Jan 25 22:38:19 2012] Warning, spatial fit 35 centroid is now closest to src. 117
[Wed Jan 25 22:38:19 2012] Spatial fit model total counts = 8418.940000, observed total counts = 8415.000000
[Wed Jan 25 22:38:19 2012] Offset between fit and detection position for source 38 = 0.213786 pixels
[Wed Jan 25 22:38:19 2012] Warning, changing simple spatial fit ID from 35 to 37
[Wed Jan 25 22:38:19 2012] 8314.450000 total counts/ 5879.790000 bgd. counts: snr = 31.751000
Spatial fit parameters:
  Offset between fit and detection position for source 38 = 0.213786 pixels
  Position = (409.3, 346.4) = 0 42 7.68 41 18 13.9
  Extent = 4.3 (4.1-4.4)", rotation angle = 0
  Source counts = 2434.7 +/- 91.2
  Background counts = 5879.8
  Rate = 0.04 +/- 0.001
[Wed Jan 25 22:38:19 2012] Vigneting correction estimate = 1.000000
[Wed Jan 25 22:38:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 25 22:38:19 2012] Assessing source extent using major axis lower bound
[Wed Jan 25 22:38:19 2012] Source does appear to be extended
[Wed Jan 25 22:38:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 25 22:39:26 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jan 25 22:39:26 2012] Initial guess for spatial extent in simple fitting = 4.26"
[Wed Jan 25 22:39:26 2012] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.027
[Wed Jan 25 22:39:26 2012] Giving source the simple spatial ID 34 for pass 1, mean size = 4.26"
[Thu Jan 26 13:17:23 2012] fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_src34.ximg exists
[Thu Jan 26 13:17:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_src34.csv
[Thu Jan 26 13:17:23 2012] fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_src34_1.ximg exists
[Thu Jan 26 13:17:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_src34.csv
[Thu Jan 26 13:17:23 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_src34_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 26 13:17:25 2012] fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src34.ximg exists
[Thu Jan 26 13:17:25 2012] fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src34_1.ximg exists
[Thu Jan 26 13:17:25 2012] Fit fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src34 appears to have run properly
[Fri Jan 27 00:06:32 2012] Spatial fit model total counts = 6683.080000, observed total counts = 6673.000000
[Fri Jan 27 00:06:32 2012] Offset between fit and detection position for source 38 = 0.086152 pixels
[Fri Jan 27 00:06:32 2012] 5511.970000 total counts/ 2209.560000 bgd. counts: snr = 70.255138
Spatial fit parameters:
  Offset between fit and detection position for source 38 = 0.086152 pixels
  Position = (409.2, 346.5) = 0 42 7.70 41 18 14.3
  Extent = 5.4 (5.3-5.7)", rotation angle = 0
  Source counts = 3302.4 +/- 74.2
  Background counts = 2209.6
  Rate = 0.05 +/- 0.001
[Fri Jan 27 00:06:32 2012] Vigneting correction estimate = 1.000000
[Fri Jan 27 00:06:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan 27 00:06:32 2012] Assessing source extent using major axis lower bound
[Fri Jan 27 00:06:32 2012] Source does appear to be extended
[Fri Jan 27 00:06:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jan 27 00:06:33 2012] Source is confused with source 117
[Fri Jan 27 00:07:42 2012] Counts = 3302.410000, rescaling region sizes by 2.000000
[Fri Jan 27 00:07:42 2012] XMMSAS src. selection expression = ellipse(35554.209880, 30096.473200, 653.118019, 653.118019, 0.000000, X, Y)
[Fri Jan 27 00:07:42 2012] Writing source region out to fullrun_pn_xmm0112570101_pi300-10000_pass1_cl_src38_src.reg
[Fri Jan 27 00:07:42 2012] Extracting stamp from image fullrun_pn_xmm0112570101_pi300-10000_cl_sm2.00.img.gz, (372, 309) - (447, 384)
[Fri Jan 27 00:07:42 2012] XMMSAS bgd. selection expression = annulus(35554.209880, 30096.473200, 2177.060063, 4354.120125, X, Y) && !ellipse(32128.487800, 26895.108600, 1255.005636, 1255.005636, 0.000000, X, Y) && !ellipse(30279.898400, 27817.838200, 1356.518439, 1356.518439, 0.000000, X, Y) && !ellipse(35931.380000, 33099.002000, 3559.776102, 2943.792085, 18.033000, X, Y) && !ellipse(31448.210785, 31277.279999, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34343.954000, 30534.022000, 414.956012, 414.956012, 0.000000, X, Y) && !ellipse(35169.887482, 29526.338623, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34576.252136, 29783.305634, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33764.478600, 29013.362800, 413.439212, 413.439212, 0.000000, X, Y) && !ellipse(32471.461731, 27419.036560, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28118.868000, 26916.762000, 3525.240101, 3525.240101, 0.000000, X, Y) && !ellipse(39205.816101, 25789.913239, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32445.705292, 25352.274139, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39444.089050, 33696.510834, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33795.843520, 32830.814200, 417.220812, 417.220812, 0.000000, X, Y) && !ellipse(35156.299400, 31685.242000, 1779.888051, 1779.888051, 0.000000, X, Y) && !ellipse(33876.155426, 29798.335754, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31796.155029, 29074.588043, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35623.052000, 29173.900000, 1690.832049, 1690.832049, 0.000000, X, Y) && !ellipse(34621.392944, 28388.326691, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32953.166000, 26689.092000, 1530.248044, 1530.248044, 0.000000, X, Y) && !ellipse(34998.584991, 26389.108215, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31173.301086, 26040.075409, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31937.458344, 26034.611359, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31065.926392, 25179.243225, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jan 27 00:07:42 2012] Writing fullrun_pn_xmm0112570101_pi300-10000_pass1_cl_src38.gif
[Fri Jan 27 01:47:10 2012] Mean detx,y = (6551.67, -5696.75) 
[Fri Jan 27 01:47:14 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jan 27 01:47:55 2012] Binned source spectrum to 10 counts/bin
[Fri Jan 27 01:47:55 2012] Setting source spectrum file to fullrun_pn_xmm0112570101_pi300-10000_pass1_cl_src38_src_b10.pi.gz
[Fri Jan 27 01:47:55 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112570101_pi300-10000_pass1_cl_src38_bgd.pi.gz
[Sat Jan 28 13:51:38 2012] Updating aperture counts using extracted products
[Sat Jan 28 13:51:38 2012] Error reading totcts from fullrun_pn_xmm0112570101_pi300-10000_pass1_cl_src38_src_b10.pi.gz
[Sat Jan 28 13:51:40 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jan 28 13:51:40 2012] Using photon index=1.80, rate=0.0541, arf fullrun_pn_xmm0112570101_pi300-10000_pass1_cl_src38.arf
[Sat Jan 28 13:51:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jan 28 13:51:40 2012] Updating source flux to 2e-13
[Sat Jan 28 14:07:25 2012] Flag c found in src. 38 procflags, skipping spectral fitting