[Wed Jan 25 01:01:39 2012] Detection parameters:
  Position = (201.5, 350.0) = 0 43 27.90 41 18 31.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1635.5 +/- 51.3
  Background counts = 105.9
  Rate = 0.03 +/- 0.0008

[Wed Jan 25 01:01:42 2012] Off-axis axis estimate = 7.96'
[Wed Jan 25 01:09:33 2012] Using EEF radius (= 10.41 ")to estimate initial spatial extent for simple fitting
[Wed Jan 25 01:09:33 2012] Initial guess for spatial extent in simple fitting = 10.41"
[Wed Jan 25 01:09:33 2012] source mask rpix=2.4, npix_max = 33, mask sum = 30, frac = 0.896
[Wed Jan 25 01:09:33 2012] Giving source the simple spatial ID 33 for pass 0, mean size = 10.41"
[Wed Jan 25 09:18:40 2012] fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_src33.ximg exists
[Wed Jan 25 09:18:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_src33.csv
[Wed Jan 25 09:18:40 2012] fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_src33_1.ximg exists
[Wed Jan 25 09:18:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_src33.csv
[Wed Jan 25 09:18:40 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan 25 09:18:42 2012] fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Wed Jan 25 09:18:42 2012] fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Wed Jan 25 09:18:42 2012] Fit fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src33 appears to have run properly
[Wed Jan 25 22:38:19 2012] Spatial fit model total counts = 2651.050000, observed total counts = 2646.000000
[Wed Jan 25 22:38:19 2012] Offset between fit and detection position for source 36 = 0.035457 pixels
[Wed Jan 25 22:38:19 2012] 2666.410000 total counts/ 1480.250000 bgd. counts: snr = 30.830157
Spatial fit parameters:
  Offset between fit and detection position for source 36 = 0.035457 pixels
  Position = (201.5, 350.1) = 0 43 27.89 41 18 29.9
  Extent = 6.6 (6.2-6.9)", rotation angle = 0
  Source counts = 1186.2 +/- 51.6
  Background counts = 1480.2
  Rate = 0.02 +/- 0.0008
[Wed Jan 25 22:38:19 2012] Vigneting correction estimate = 1.000000
[Wed Jan 25 22:38:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 25 22:38:19 2012] Assessing source extent using major axis lower bound
[Wed Jan 25 22:38:19 2012] Source does appear to be extended
[Wed Jan 25 22:38:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 25 22:39:26 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jan 25 22:39:26 2012] Initial guess for spatial extent in simple fitting = 6.56"
[Wed Jan 25 22:39:26 2012] source mask rpix=1.5, npix_max = 16, mask sum = 20, frac = 1.241
[Wed Jan 25 22:39:26 2012] Giving source the simple spatial ID 32 for pass 1, mean size = 6.56"
[Thu Jan 26 13:17:23 2012] fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_src32.ximg exists
[Thu Jan 26 13:17:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_src32.csv
[Thu Jan 26 13:17:23 2012] fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_src32_1.ximg exists
[Thu Jan 26 13:17:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_src32.csv
[Thu Jan 26 13:17:23 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_src32_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 26 13:17:25 2012] fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src32.ximg exists
[Thu Jan 26 13:17:25 2012] fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src32_1.ximg exists
[Thu Jan 26 13:17:25 2012] Fit fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src32 appears to have run properly
[Fri Jan 27 00:06:32 2012] Warning, spatial fit 32 centroid is now closest to src. 41
[Fri Jan 27 00:06:32 2012] Vigneting correction estimate = 1.000000
[Fri Jan 27 00:06:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan 27 00:06:32 2012] Assessing source extent using major axis lower bound
[Fri Jan 27 00:06:32 2012] Source does appear to be extended
[Fri Jan 27 00:06:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jan 27 00:07:41 2012] Counts = 1186.160000, rescaling region sizes by 2.000000
[Fri Jan 27 00:07:41 2012] XMMSAS src. selection expression = ellipse(17481.853400, 30407.813800, 786.784823, 786.784823, 0.000000, X, Y)
[Fri Jan 27 00:07:41 2012] Writing source region out to fullrun_pn_xmm0112570101_pi300-10000_pass1_cl_src36_src.reg
[Fri Jan 27 00:07:41 2012] Extracting stamp from image fullrun_pn_xmm0112570101_pi300-10000_cl_sm2.00.img.gz, (156, 305) - (247, 395)
[Fri Jan 27 00:07:41 2012] XMMSAS bgd. selection expression = annulus(17481.853400, 30407.813800, 2622.616075, 5245.232151, X, Y) && !ellipse(23046.748000, 26901.632000, 379.982411, 379.982411, 0.000000, X, Y) && !ellipse(21379.838400, 26020.948000, 1446.573642, 1258.363236, 85.399710, X, Y) && !ellipse(15346.322311, 25876.735352, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22495.467080, 28647.111200, 438.346413, 438.346413, 0.000000, X, Y) && !ellipse(23032.663932, 33820.486188, 511.653510, 369.902039, 319.870306, X, Y) && !ellipse(19517.948151, 32553.693298, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21549.131200, 31003.910200, 448.438413, 448.438413, 0.000000, X, Y) && !ellipse(22936.289760, 29958.598800, 403.184812, 279.389608, 19.120900, X, Y) && !ellipse(19021.847961, 29612.454498, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11658.207840, 28563.824127, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22824.994232, 27420.417175, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12293.720963, 33906.128052, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24108.978000, 32224.854000, 1484.376043, 1484.376043, 0.000000, X, Y) && !ellipse(22085.417236, 32568.006561, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22331.960602, 31288.930267, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21022.995000, 29965.432000, 741.812021, 741.812021, 0.000000, X, Y) && !ellipse(22132.344879, 29700.354553, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18190.770691, 29162.581024, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20520.962463, 28392.659698, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22008.084198, 26922.527496, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23596.420959, 26559.221252, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23535.665924, 24830.807800, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jan 27 00:07:41 2012] Writing fullrun_pn_xmm0112570101_pi300-10000_pass1_cl_src36.gif
[Fri Jan 27 01:44:02 2012] Mean detx,y = (-10508.82, 120.88) 
[Fri Jan 27 01:44:08 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jan 27 01:45:19 2012] Binned source spectrum to 10 counts/bin
[Fri Jan 27 01:45:19 2012] Setting source spectrum file to fullrun_pn_xmm0112570101_pi300-10000_pass1_cl_src36_src_b10.pi.gz
[Fri Jan 27 01:45:19 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112570101_pi300-10000_pass1_cl_src36_bgd.pi.gz
[Sat Jan 28 13:51:38 2012] Updating aperture counts using extracted products
[Sat Jan 28 13:51:38 2012] Error reading totcts from fullrun_pn_xmm0112570101_pi300-10000_pass1_cl_src36_src_b10.pi.gz
[Sat Jan 28 13:51:40 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jan 28 13:51:40 2012] Using photon index=1.80, rate=0.0194, arf fullrun_pn_xmm0112570101_pi300-10000_pass1_cl_src36.arf
[Sat Jan 28 13:51:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jan 28 13:51:40 2012] Updating source flux to 9.4e-14