[Wed Jan 25 01:01:39 2012] Detection parameters:
  Position = (248.4, 356.9) = 0 43 9.80 41 19 0.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 5744.3 +/- 92.4
  Background counts = 152.3
  Rate = 0.2 +/- 0.003

[Wed Jan 25 01:01:42 2012] Off-axis axis estimate = 5.58'
[Wed Jan 25 01:09:33 2012] Using EEF radius (= 9.22 ")to estimate initial spatial extent for simple fitting
[Wed Jan 25 01:09:33 2012] Initial guess for spatial extent in simple fitting = 9.22"
[Wed Jan 25 01:09:33 2012] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.093
[Wed Jan 25 01:09:33 2012] Giving source the simple spatial ID 30 for pass 0, mean size = 9.22"
[Wed Jan 25 09:18:40 2012] fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_src30.ximg exists
[Wed Jan 25 09:18:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_src30.csv
[Wed Jan 25 09:18:40 2012] fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_src30_1.ximg exists
[Wed Jan 25 09:18:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_src30.csv
[Wed Jan 25 09:18:40 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan 25 09:18:42 2012] fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src30.ximg exists
[Wed Jan 25 09:18:42 2012] fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src30_1.ximg exists
[Wed Jan 25 09:18:42 2012] Fit fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src30 appears to have run properly
[Wed Jan 25 22:38:19 2012] Spatial fit model total counts = 6553.620000, observed total counts = 6558.000000
[Wed Jan 25 22:38:19 2012] Offset between fit and detection position for source 33 = 0.111111 pixels
[Wed Jan 25 22:38:19 2012] 6661.830000 total counts/ 2492.230000 bgd. counts: snr = 83.521894
Spatial fit parameters:
  Offset between fit and detection position for source 33 = 0.111111 pixels
  Position = (248.2, 356.9) = 0 43 9.85 41 19 0.0
  Extent = 5.6 (5.5-5.8)", rotation angle = 0
  Source counts = 4169.6 +/- 81.6
  Background counts = 2492.2
  Rate = 0.07 +/- 0.001
[Wed Jan 25 22:38:19 2012] Vigneting correction estimate = 1.000000
[Wed Jan 25 22:38:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 25 22:38:19 2012] Assessing source extent using major axis lower bound
[Wed Jan 25 22:38:19 2012] Source does appear to be extended
[Wed Jan 25 22:38:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 25 22:39:26 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jan 25 22:39:26 2012] Initial guess for spatial extent in simple fitting = 5.60"
[Wed Jan 25 22:39:26 2012] source mask rpix=1.3, npix_max = 12, mask sum = 16, frac = 1.251
[Wed Jan 25 22:39:26 2012] Giving source the simple spatial ID 29 for pass 1, mean size = 5.60"
[Thu Jan 26 13:17:23 2012] fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_src29.ximg exists
[Thu Jan 26 13:17:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_src29.csv
[Thu Jan 26 13:17:23 2012] fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_src29_1.ximg exists
[Thu Jan 26 13:17:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_src29.csv
[Thu Jan 26 13:17:23 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_src29_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 26 13:17:25 2012] fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src29.ximg exists
[Thu Jan 26 13:17:25 2012] fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src29_1.ximg exists
[Thu Jan 26 13:17:25 2012] Fit fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src29 appears to have run properly
[Fri Jan 27 00:06:32 2012] Spatial fit model total counts = 6541.130000, observed total counts = 6558.000000
[Fri Jan 27 00:06:32 2012] Offset between fit and detection position for source 33 = 0.001080 pixels
[Fri Jan 27 00:06:32 2012] 6650.880000 total counts/ 2499.010000 bgd. counts: snr = 83.053846
Spatial fit parameters:
  Offset between fit and detection position for source 33 = 0.001080 pixels
  Position = (248.2, 356.9) = 0 43 9.85 41 19 0.0
  Extent = 5.6 (5.4-5.8)", rotation angle = 0
  Source counts = 4151.9 +/- 81.6
  Background counts = 2499.0
  Rate = 0.07 +/- 0.001
[Fri Jan 27 00:06:32 2012] Vigneting correction estimate = 1.000000
[Fri Jan 27 00:06:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan 27 00:06:32 2012] Assessing source extent using major axis lower bound
[Fri Jan 27 00:06:32 2012] Source does appear to be extended
[Fri Jan 27 00:06:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jan 27 00:07:41 2012] Counts = 4151.870000, rescaling region sizes by 2.000000
[Fri Jan 27 00:07:41 2012] XMMSAS src. selection expression = ellipse(21549.131200, 31003.910200, 672.657619, 672.657619, 0.000000, X, Y)
[Fri Jan 27 00:07:41 2012] Writing source region out to fullrun_pn_xmm0112570101_pi300-10000_pass1_cl_src33_src.reg
[Fri Jan 27 00:07:41 2012] Extracting stamp from image fullrun_pn_xmm0112570101_pi300-10000_cl_sm2.00.img.gz, (210, 318) - (287, 396)
[Fri Jan 27 00:07:41 2012] XMMSAS bgd. selection expression = annulus(21549.131200, 31003.910200, 2242.192065, 4484.384129, X, Y) && !ellipse(24910.917600, 27465.106400, 1416.256841, 1114.603232, 107.584500, X, Y) && !ellipse(25465.799600, 26987.258800, 358.565610, 358.565610, 0.000000, X, Y) && !ellipse(23046.748000, 26901.632000, 379.982411, 379.982411, 0.000000, X, Y) && !ellipse(21379.838400, 26020.948000, 1446.573642, 1258.363236, 85.399710, X, Y) && !ellipse(26384.752940, 26646.930800, 1527.924044, 1527.924044, 0.000000, X, Y) && !ellipse(26685.723800, 27909.219800, 1828.219253, 1426.192841, 58.751000, X, Y) && !ellipse(26701.200000, 27881.222400, 3523.032101, 3523.032101, 0.000000, X, Y) && !ellipse(22495.467080, 28647.111200, 438.346413, 438.346413, 0.000000, X, Y) && !ellipse(25435.199400, 30883.062000, 355.937610, 355.937610, 0.000000, X, Y) && !ellipse(23801.962708, 27445.321350, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23032.663932, 33820.486188, 511.653510, 369.902039, 319.870306, X, Y) && !ellipse(19517.948151, 32553.693298, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23850.432000, 31375.805200, 435.393613, 435.393613, 0.000000, X, Y) && !ellipse(17481.853400, 30407.813800, 524.523215, 524.523215, 0.000000, X, Y) && !ellipse(24812.838000, 30492.436000, 414.856812, 414.856812, 0.000000, X, Y) && !ellipse(22936.289760, 29958.598800, 403.184812, 279.389608, 19.120900, X, Y) && !ellipse(19021.847961, 29612.454498, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27109.332360, 28857.898000, 1249.752036, 1249.752036, 0.000000, X, Y) && !ellipse(27876.248000, 29080.346000, 2336.824067, 2336.824067, 0.000000, X, Y) && !ellipse(22824.994232, 27420.417175, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27705.830170, 27190.069489, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(28118.868000, 26916.762000, 3525.240101, 3525.240101, 0.000000, X, Y) && !ellipse(24156.510010, 26764.555908, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24108.978000, 32224.854000, 1484.376043, 1484.376043, 0.000000, X, Y) && !ellipse(22085.417236, 32568.006561, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22331.960602, 31288.930267, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27031.076600, 30986.086000, 1340.856039, 1340.856039, 0.000000, X, Y) && !ellipse(26830.514000, 30280.486000, 1354.816039, 1354.816039, 0.000000, X, Y) && !ellipse(24346.334000, 30209.696000, 1342.408039, 1342.408039, 0.000000, X, Y) && !ellipse(21022.995000, 29965.432000, 741.812021, 741.812021, 0.000000, X, Y) && !ellipse(22132.344879, 29700.354553, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24726.604140, 29502.123200, 658.736019, 658.736019, 0.000000, X, Y) && !ellipse(23958.500580, 28978.393677, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18190.770691, 29162.581024, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23742.046661, 28585.773254, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24331.552000, 28416.186000, 676.592019, 676.592019, 0.000000, X, Y) && !ellipse(20520.962463, 28392.659698, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22008.084198, 26922.527496, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23937.520538, 26150.644104, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23596.420959, 26559.221252, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jan 27 00:07:41 2012] Writing fullrun_pn_xmm0112570101_pi300-10000_pass1_cl_src33.gif
[Fri Jan 27 01:40:08 2012] Mean detx,y = (-6877.96, -1824.15) 
[Fri Jan 27 01:40:14 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jan 27 01:41:04 2012] Binned source spectrum to 10 counts/bin
[Fri Jan 27 01:41:04 2012] Setting source spectrum file to fullrun_pn_xmm0112570101_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Fri Jan 27 01:41:04 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112570101_pi300-10000_pass1_cl_src33_bgd.pi.gz
[Sat Jan 28 13:51:37 2012] Updating aperture counts using extracted products
[Sat Jan 28 13:51:38 2012] Error reading totcts from fullrun_pn_xmm0112570101_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Sat Jan 28 13:51:40 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jan 28 13:51:40 2012] Using photon index=1.80, rate=0.068, arf fullrun_pn_xmm0112570101_pi300-10000_pass1_cl_src33.arf
[Sat Jan 28 13:51:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jan 28 13:51:40 2012] Updating source flux to 2.6e-13