[Wed Jan 25 01:01:39 2012] Detection parameters:
  Position = (274.8, 361.1) = 0 42 59.58 41 19 19.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 7975.9 +/- 108.7
  Background counts = 175.8
  Rate = 0.2 +/- 0.003

[Wed Jan 25 01:01:42 2012] Off-axis axis estimate = 4.86'
[Wed Jan 25 01:09:33 2012] Using EEF radius (= 8.86 ")to estimate initial spatial extent for simple fitting
[Wed Jan 25 01:09:33 2012] Initial guess for spatial extent in simple fitting = 8.86"
[Wed Jan 25 01:09:33 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.972
[Wed Jan 25 01:09:33 2012] Giving source the simple spatial ID 29 for pass 0, mean size = 8.86"
[Wed Jan 25 09:18:40 2012] fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_src29.ximg exists
[Wed Jan 25 09:18:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_src29.csv
[Wed Jan 25 09:18:40 2012] fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_src29_1.ximg exists
[Wed Jan 25 09:18:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_src29.csv
[Wed Jan 25 09:18:40 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan 25 09:18:42 2012] fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Wed Jan 25 09:18:42 2012] fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Wed Jan 25 09:18:42 2012] Fit fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src29 appears to have run properly
[Wed Jan 25 22:38:19 2012] Spatial fit model total counts = 9407.090000, observed total counts = 9410.000000
[Wed Jan 25 22:38:19 2012] Offset between fit and detection position for source 32 = 0.152819 pixels
[Wed Jan 25 22:38:19 2012] 9422.250000 total counts/ 3901.000000 bgd. counts: snr = 88.399424
Spatial fit parameters:
  Offset between fit and detection position for source 32 = 0.152819 pixels
  Position = (274.7, 361.2) = 0 42 59.63 41 19 18.7
  Extent = 5.5 (5.4-5.6)", rotation angle = 0
  Source counts = 5521.2 +/- 97.1
  Background counts = 3901.0
  Rate = 0.09 +/- 0.002
[Wed Jan 25 22:38:19 2012] Vigneting correction estimate = 1.000000
[Wed Jan 25 22:38:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 25 22:38:19 2012] Assessing source extent using major axis lower bound
[Wed Jan 25 22:38:19 2012] Source does appear to be extended
[Wed Jan 25 22:38:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 25 22:38:19 2012] Source is confused with source 95
[Wed Jan 25 22:39:26 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jan 25 22:39:26 2012] Initial guess for spatial extent in simple fitting = 5.46"
[Wed Jan 25 22:39:26 2012] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.975
[Wed Jan 25 22:39:26 2012] Giving source the simple spatial ID 28 for pass 1, mean size = 5.46"
[Thu Jan 26 13:17:23 2012] fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_src28.ximg exists
[Thu Jan 26 13:17:23 2012] fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_src28_1.ximg exists
[Thu Jan 26 13:17:23 2012] Fit fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_src28 appears to have run properly
[Thu Jan 26 13:17:25 2012] fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src28.ximg exists
[Thu Jan 26 13:17:25 2012] fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src28_1.ximg exists
[Thu Jan 26 13:17:25 2012] Fit fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src28 appears to have run properly
[Fri Jan 27 00:06:32 2012] Spatial fit model total counts = 9411.690000, observed total counts = 9410.000000
[Fri Jan 27 00:06:32 2012] Offset between fit and detection position for source 32 = 0.003050 pixels
[Fri Jan 27 00:06:32 2012] 9426.810000 total counts/ 3882.860000 bgd. counts: snr = 88.969969
Spatial fit parameters:
  Offset between fit and detection position for source 32 = 0.003050 pixels
  Position = (274.7, 361.2) = 0 42 59.64 41 19 18.7
  Extent = 5.4 (5.3-5.6)", rotation angle = 0
  Source counts = 5543.9 +/- 97.1
  Background counts = 3882.9
  Rate = 0.09 +/- 0.002
[Fri Jan 27 00:06:32 2012] Vigneting correction estimate = 1.000000
[Fri Jan 27 00:06:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan 27 00:06:32 2012] Assessing source extent using major axis lower bound
[Fri Jan 27 00:06:32 2012] Source does appear to be extended
[Fri Jan 27 00:06:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jan 27 00:07:41 2012] Counts = 5543.950000, rescaling region sizes by 2.000000
[Fri Jan 27 00:07:41 2012] XMMSAS src. selection expression = ellipse(23850.432000, 31375.805200, 653.090419, 653.090419, 0.000000, X, Y)
[Fri Jan 27 00:07:41 2012] Writing source region out to fullrun_pn_xmm0112570101_pi300-10000_pass1_cl_src32_src.reg
[Fri Jan 27 00:07:41 2012] Extracting stamp from image fullrun_pn_xmm0112570101_pi300-10000_cl_sm2.00.img.gz, (237, 324) - (312, 399)
[Fri Jan 27 00:07:41 2012] XMMSAS bgd. selection expression = annulus(23850.432000, 31375.805200, 2176.968063, 4353.936125, X, Y) && !ellipse(28600.036000, 27448.894000, 867.300025, 867.300025, 0.000000, X, Y) && !ellipse(24910.917600, 27465.106400, 1416.256841, 1114.603232, 107.584500, X, Y) && !ellipse(25465.799600, 26987.258800, 358.565610, 358.565610, 0.000000, X, Y) && !ellipse(23046.748000, 26901.632000, 379.982411, 379.982411, 0.000000, X, Y) && !ellipse(21379.838400, 26020.948000, 1446.573642, 1258.363236, 85.399710, X, Y) && !ellipse(26384.752940, 26646.930800, 1527.924044, 1527.924044, 0.000000, X, Y) && !ellipse(26685.723800, 27909.219800, 1828.219253, 1426.192841, 58.751000, X, Y) && !ellipse(26701.200000, 27881.222400, 3523.032101, 3523.032101, 0.000000, X, Y) && !ellipse(22495.467080, 28647.111200, 438.346413, 438.346413, 0.000000, X, Y) && !ellipse(25435.199400, 30883.062000, 355.937610, 355.937610, 0.000000, X, Y) && !ellipse(23801.962708, 27445.321350, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23032.663932, 33820.486188, 511.653510, 369.902039, 319.870306, X, Y) && !ellipse(19517.948151, 32553.693298, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21549.131200, 31003.910200, 448.438413, 448.438413, 0.000000, X, Y) && !ellipse(28224.456140, 30691.908000, 407.699212, 407.699212, 0.000000, X, Y) && !ellipse(24812.838000, 30492.436000, 414.856812, 414.856812, 0.000000, X, Y) && !ellipse(22936.289760, 29958.598800, 403.184812, 279.389608, 19.120900, X, Y) && !ellipse(19021.847961, 29612.454498, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27109.332360, 28857.898000, 1249.752036, 1249.752036, 0.000000, X, Y) && !ellipse(27876.248000, 29080.346000, 2336.824067, 2336.824067, 0.000000, X, Y) && !ellipse(22824.994232, 27420.417175, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27705.830170, 27190.069489, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(27173.956116, 26753.094147, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28118.868000, 26916.762000, 3525.240101, 3525.240101, 0.000000, X, Y) && !ellipse(24156.510010, 26764.555908, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27918.659973, 33496.966797, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24108.978000, 32224.854000, 1484.376043, 1484.376043, 0.000000, X, Y) && !ellipse(22085.417236, 32568.006561, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22331.960602, 31288.930267, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27031.076600, 30986.086000, 1340.856039, 1340.856039, 0.000000, X, Y) && !ellipse(26830.514000, 30280.486000, 1354.816039, 1354.816039, 0.000000, X, Y) && !ellipse(24346.334000, 30209.696000, 1342.408039, 1342.408039, 0.000000, X, Y) && !ellipse(21022.995000, 29965.432000, 741.812021, 741.812021, 0.000000, X, Y) && !ellipse(22132.344879, 29700.354553, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24726.604140, 29502.123200, 658.736019, 658.736019, 0.000000, X, Y) && !ellipse(23958.500580, 28978.393677, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23742.046661, 28585.773254, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24331.552000, 28416.186000, 676.592019, 676.592019, 0.000000, X, Y) && !ellipse(20520.962463, 28392.659698, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28963.737915, 28006.652954, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22008.084198, 26922.527496, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23596.420959, 26559.221252, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jan 27 00:07:41 2012] Writing fullrun_pn_xmm0112570101_pi300-10000_pass1_cl_src32.gif
[Fri Jan 27 01:38:45 2012] Mean detx,y = (-4852.80, -2946.30) 
[Fri Jan 27 01:38:51 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jan 27 01:39:33 2012] Binned source spectrum to 10 counts/bin
[Fri Jan 27 01:39:34 2012] Setting source spectrum file to fullrun_pn_xmm0112570101_pi300-10000_pass1_cl_src32_src_b10.pi.gz
[Fri Jan 27 01:39:34 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112570101_pi300-10000_pass1_cl_src32_bgd.pi.gz
[Sat Jan 28 13:51:37 2012] Updating aperture counts using extracted products
[Sat Jan 28 13:51:37 2012] Error reading totcts from fullrun_pn_xmm0112570101_pi300-10000_pass1_cl_src32_src_b10.pi.gz
[Sat Jan 28 13:51:40 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jan 28 13:51:40 2012] Using photon index=1.80, rate=0.0908, arf fullrun_pn_xmm0112570101_pi300-10000_pass1_cl_src32.arf
[Sat Jan 28 13:51:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jan 28 13:51:40 2012] Updating source flux to 3.1e-13
[Sat Jan 28 14:07:25 2012] Flag c found in src. 32 procflags, skipping spectral fitting