[Wed Jan 25 01:01:39 2012] Detection parameters:
  Position = (348.5, 365.7) = 0 42 31.13 41 19 38.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3145.5 +/- 67.9
  Background counts = 153.5
  Rate = 0.08 +/- 0.002

[Wed Jan 25 01:01:42 2012] Off-axis axis estimate = 6.08'
[Wed Jan 25 01:09:33 2012] Using EEF radius (= 9.47 ")to estimate initial spatial extent for simple fitting
[Wed Jan 25 01:09:33 2012] Initial guess for spatial extent in simple fitting = 9.47"
[Wed Jan 25 01:09:33 2012] source mask rpix=2.2, npix_max = 28, mask sum = 24, frac = 0.837
[Wed Jan 25 01:09:33 2012] Giving source the simple spatial ID 26 for pass 0, mean size = 9.47"
[Wed Jan 25 09:18:40 2012] fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_src26.ximg exists
[Wed Jan 25 09:18:40 2012] fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_src26_1.ximg exists
[Wed Jan 25 09:18:40 2012] Fit fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_src26 appears to have run properly
[Wed Jan 25 09:18:42 2012] fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src26.ximg exists
[Wed Jan 25 09:18:42 2012] fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists
[Wed Jan 25 09:18:42 2012] Fit fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src26 appears to have run properly
[Wed Jan 25 22:38:19 2012] Spatial fit model total counts = 4272.600000, observed total counts = 4279.000000
[Wed Jan 25 22:38:19 2012] Offset between fit and detection position for source 29 = 0.184883 pixels
[Wed Jan 25 22:38:19 2012] 4281.130000 total counts/ 1967.280000 bgd. counts: snr = 52.167751
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 0.184883 pixels
  Position = (348.3, 365.7) = 0 42 31.20 41 19 38.1
  Extent = 5.3 (5.1-5.5)", rotation angle = 0
  Source counts = 2313.8 +/- 65.4
  Background counts = 1967.3
  Rate = 0.04 +/- 0.001
[Wed Jan 25 22:38:19 2012] Vigneting correction estimate = 1.000000
[Wed Jan 25 22:38:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 25 22:38:19 2012] Assessing source extent using major axis lower bound
[Wed Jan 25 22:38:19 2012] Source does appear to be extended
[Wed Jan 25 22:38:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 25 22:39:26 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jan 25 22:39:26 2012] Initial guess for spatial extent in simple fitting = 5.34"
[Wed Jan 25 22:39:26 2012] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.754
[Wed Jan 25 22:39:26 2012] Giving source the simple spatial ID 25 for pass 1, mean size = 5.34"
[Thu Jan 26 13:17:23 2012] fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_src25.ximg exists
[Thu Jan 26 13:17:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_src25.csv
[Thu Jan 26 13:17:23 2012] fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_src25_1.ximg exists
[Thu Jan 26 13:17:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_src25.csv
[Thu Jan 26 13:17:23 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 26 13:17:25 2012] fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Thu Jan 26 13:17:25 2012] fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Thu Jan 26 13:17:25 2012] Fit fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src25 appears to have run properly
[Fri Jan 27 00:06:32 2012] Spatial fit model total counts = 4295.950000, observed total counts = 4302.000000
[Fri Jan 27 00:06:32 2012] Offset between fit and detection position for source 29 = 0.008731 pixels
[Fri Jan 27 00:06:32 2012] 4318.960000 total counts/ 2008.970000 bgd. counts: snr = 51.537503
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 0.008731 pixels
  Position = (348.3, 365.7) = 0 42 31.20 41 19 38.1
  Extent = 5.3 (5.2-5.5)", rotation angle = 0
  Source counts = 2310.0 +/- 65.7
  Background counts = 2009.0
  Rate = 0.04 +/- 0.001
[Fri Jan 27 00:06:32 2012] Vigneting correction estimate = 1.000000
[Fri Jan 27 00:06:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan 27 00:06:32 2012] Assessing source extent using major axis lower bound
[Fri Jan 27 00:06:32 2012] Source does appear to be extended
[Fri Jan 27 00:06:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jan 27 00:07:41 2012] Counts = 2309.990000, rescaling region sizes by 2.000000
[Fri Jan 27 00:07:41 2012] XMMSAS src. selection expression = ellipse(30256.049000, 31764.844800, 640.954818, 640.954818, 0.000000, X, Y)
[Fri Jan 27 00:07:41 2012] Writing source region out to fullrun_pn_xmm0112570101_pi300-10000_pass1_cl_src29_src.reg
[Fri Jan 27 00:07:41 2012] Extracting stamp from image fullrun_pn_xmm0112570101_pi300-10000_cl_sm2.00.img.gz, (311, 329) - (385, 403)
[Fri Jan 27 00:07:41 2012] XMMSAS bgd. selection expression = annulus(30256.049000, 31764.844800, 2136.516061, 4273.032123, X, Y) && !ellipse(32128.487800, 26895.108600, 1255.005636, 1255.005636, 0.000000, X, Y) && !ellipse(28600.036000, 27448.894000, 867.300025, 867.300025, 0.000000, X, Y) && !ellipse(30279.898400, 27817.838200, 1356.518439, 1356.518439, 0.000000, X, Y) && !ellipse(24910.917600, 27465.106400, 1416.256841, 1114.603232, 107.584500, X, Y) && !ellipse(26384.752940, 26646.930800, 1527.924044, 1527.924044, 0.000000, X, Y) && !ellipse(26685.723800, 27909.219800, 1828.219253, 1426.192841, 58.751000, X, Y) && !ellipse(26701.200000, 27881.222400, 3523.032101, 3523.032101, 0.000000, X, Y) && !ellipse(35931.380000, 33099.002000, 3559.776102, 2943.792085, 18.033000, X, Y) && !ellipse(29362.554220, 32301.419400, 429.974412, 429.974412, 0.000000, X, Y) && !ellipse(31448.210785, 31277.279999, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34343.954000, 30534.022000, 414.956012, 414.956012, 0.000000, X, Y) && !ellipse(28224.456140, 30691.908000, 407.699212, 407.699212, 0.000000, X, Y) && !ellipse(35169.887482, 29526.338623, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34576.252136, 29783.305634, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27109.332360, 28857.898000, 1249.752036, 1249.752036, 0.000000, X, Y) && !ellipse(33764.478600, 29013.362800, 413.439212, 413.439212, 0.000000, X, Y) && !ellipse(27876.248000, 29080.346000, 2336.824067, 2336.824067, 0.000000, X, Y) && !ellipse(29675.145050, 27781.968445, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32471.461731, 27419.036560, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27705.830170, 27190.069489, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(27173.956116, 26753.094147, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28118.868000, 26916.762000, 3525.240101, 3525.240101, 0.000000, X, Y) && !ellipse(29631.557434, 34386.029907, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27918.659973, 33496.966797, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33795.843520, 32830.814200, 417.220812, 417.220812, 0.000000, X, Y) && !ellipse(35156.299400, 31685.242000, 1779.888051, 1779.888051, 0.000000, X, Y) && !ellipse(27031.076600, 30986.086000, 1340.856039, 1340.856039, 0.000000, X, Y) && !ellipse(26830.514000, 30280.486000, 1354.816039, 1354.816039, 0.000000, X, Y) && !ellipse(33876.155426, 29798.335754, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31796.155029, 29074.588043, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35623.052000, 29173.900000, 1690.832049, 1690.832049, 0.000000, X, Y) && !ellipse(34621.392944, 28388.326691, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28963.737915, 28006.652954, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32953.166000, 26689.092000, 1530.248044, 1530.248044, 0.000000, X, Y)
[Fri Jan 27 00:07:41 2012] Writing fullrun_pn_xmm0112570101_pi300-10000_pass1_cl_src29.gif
[Fri Jan 27 01:33:32 2012] Mean detx,y = (1055.91, -5489.03) 
[Fri Jan 27 01:33:36 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jan 27 01:34:09 2012] Binned source spectrum to 10 counts/bin
[Fri Jan 27 01:34:09 2012] Setting source spectrum file to fullrun_pn_xmm0112570101_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Fri Jan 27 01:34:09 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112570101_pi300-10000_pass1_cl_src29_bgd.pi.gz
[Sat Jan 28 13:51:37 2012] Updating aperture counts using extracted products
[Sat Jan 28 13:51:37 2012] Error reading totcts from fullrun_pn_xmm0112570101_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Sat Jan 28 13:51:40 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jan 28 13:51:40 2012] Using photon index=1.80, rate=0.0378, arf fullrun_pn_xmm0112570101_pi300-10000_pass1_cl_src29.arf
[Sat Jan 28 13:51:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jan 28 13:51:40 2012] Updating source flux to 1.2e-13