[Wed Jan 25 01:01:40 2012] Detection parameters:
  Position = (315.6, 352.0) = 0 42 43.85 41 18 38.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 165.6 +/- 28.4
  Background counts = 213.2
  Rate = 0.004 +/- 0.0006

[Wed Jan 25 01:01:42 2012] Off-axis axis estimate = 4.08'
[Wed Jan 25 01:09:33 2012] Using EEF radius (= 8.47 ")to estimate initial spatial extent for simple fitting
[Wed Jan 25 01:09:33 2012] Initial guess for spatial extent in simple fitting = 8.47"
[Wed Jan 25 01:09:33 2012] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.835
[Wed Jan 25 01:09:33 2012] Giving source the simple spatial ID 98 for pass 0, mean size = 8.47"
[Wed Jan 25 09:18:41 2012] fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_src98.ximg exists
[Wed Jan 25 09:18:41 2012] fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_src98_1.ximg exists
[Wed Jan 25 09:18:41 2012] Fit fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_src98 appears to have run properly
[Wed Jan 25 09:18:43 2012] fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src98.ximg exists
[Wed Jan 25 09:18:43 2012] fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src98_1.ximg exists
[Wed Jan 25 09:18:43 2012] Fit fullrun_pn_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src98 appears to have run properly
[Wed Jan 25 22:38:19 2012] Source 106 is offset by -6.562224 and -3.857210 pixels which is larger than
2 X fitted extent = 1.016124 x 1.016124, not incorporating fit results
[Wed Jan 25 22:38:19 2012] Warning, spatial fit 98 centroid is now closest to src. 108
[Wed Jan 25 22:38:19 2012] Spatial fit model total counts = 3581.410000, observed total counts = 3653.000000
[Wed Jan 25 22:38:19 2012] Offset between fit and detection position for source 106 = 6.379230 pixels
[Wed Jan 25 22:38:19 2012] Warning, changing simple spatial fit ID from 98 to 100
[Wed Jan 25 22:38:19 2012] 3452.780000 total counts/ 2281.330000 bgd. counts: snr = 24.526168
Spatial fit parameters:
  Offset between fit and detection position for source 106 = 6.379230 pixels
  Position = (311.3, 356.7) = 0 42 45.52 41 18 59.2
  Extent = 16.8 (16.7-16.8)", rotation angle = 0
  Source counts = 1171.5 +/- 58.8
  Background counts = 2281.3
  Rate = 0.02 +/- 0.001
[Wed Jan 25 22:38:19 2012] Vigneting correction estimate = 1.000000
[Wed Jan 25 22:38:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 25 22:38:19 2012] Assessing source extent using major axis lower bound
[Wed Jan 25 22:38:19 2012] Source does appear to be extended
[Wed Jan 25 22:38:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 25 22:38:19 2012] Source is confused with source 108
[Wed Jan 25 22:39:26 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jan 25 22:39:26 2012] Initial guess for spatial extent in simple fitting = 16.76"
[Wed Jan 25 22:39:26 2012] source mask rpix=3.9, npix_max = 75, mask sum = 68, frac = 0.897
[Wed Jan 25 22:39:26 2012] Giving source the simple spatial ID 84 for pass 1, mean size = 16.76"
[Thu Jan 26 13:17:24 2012] fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_src84.ximg exists
[Thu Jan 26 13:17:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_src84.csv
[Thu Jan 26 13:17:24 2012] fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_src84_1.ximg exists
[Thu Jan 26 13:17:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_src84.csv
[Thu Jan 26 13:17:24 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_src84_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_src84.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 26 13:17:26 2012] fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src84.ximg exists
[Thu Jan 26 13:17:26 2012] fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src84_1.ximg exists
[Thu Jan 26 13:17:26 2012] Fit fullrun_pn_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src84 appears to have run properly
[Fri Jan 27 00:06:32 2012] Warning, spatial fit 84 centroid is now closest to src. 123
[Fri Jan 27 00:06:32 2012] Vigneting correction estimate = 1.000000
[Fri Jan 27 00:06:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan 27 00:06:32 2012] Assessing source extent using major axis lower bound
[Fri Jan 27 00:06:32 2012] Source does appear to be extended
[Fri Jan 27 00:06:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jan 27 00:07:46 2012] Counts = 1171.450000, rescaling region sizes by 2.000000
[Fri Jan 27 00:07:46 2012] XMMSAS src. selection expression = ellipse(27031.076600, 30986.086000, 2011.284058, 2011.284058, 0.000000, X, Y)
[Fri Jan 27 00:07:46 2012] Writing source region out to fullrun_pn_xmm0112570101_pi300-10000_pass1_cl_src106_src.reg
[Fri Jan 27 00:07:46 2012] Extracting stamp from image fullrun_pn_xmm0112570101_pi300-10000_cl_sm2.00.img.gz, (196, 241) - (427, 472)
[Fri Jan 27 00:07:47 2012] XMMSAS bgd. selection expression = annulus(27031.076600, 30986.086000, 6704.280193, 13408.560386, X, Y) && !ellipse(32128.487800, 26895.108600, 1255.005636, 1255.005636, 0.000000, X, Y) && !ellipse(28600.036000, 27448.894000, 867.300025, 867.300025, 0.000000, X, Y) && !ellipse(30279.898400, 27817.838200, 1356.518439, 1356.518439, 0.000000, X, Y) && !ellipse(24910.917600, 27465.106400, 1416.256841, 1114.603232, 107.584500, X, Y) && !ellipse(25465.799600, 26987.258800, 358.565610, 358.565610, 0.000000, X, Y) && !ellipse(23046.748000, 26901.632000, 379.982411, 379.982411, 0.000000, X, Y) && !ellipse(21379.838400, 26020.948000, 1446.573642, 1258.363236, 85.399710, X, Y) && !ellipse(26384.752940, 26646.930800, 1527.924044, 1527.924044, 0.000000, X, Y) && !ellipse(26685.723800, 27909.219800, 1828.219253, 1426.192841, 58.751000, X, Y) && !ellipse(26701.200000, 27881.222400, 3523.032101, 3523.032101, 0.000000, X, Y) && !ellipse(15346.322311, 25876.735352, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30922.368766, 23063.290200, 409.550412, 409.550412, 0.000000, X, Y) && !ellipse(22495.467080, 28647.111200, 438.346413, 438.346413, 0.000000, X, Y) && !ellipse(25435.199400, 30883.062000, 355.937610, 355.937610, 0.000000, X, Y) && !ellipse(23801.962708, 27445.321350, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26378.838000, 38630.720400, 560.164248, 560.164248, 0.000000, X, Y) && !ellipse(23450.378000, 44542.218000, 818.376024, 279.340808, 344.308000, X, Y) && !ellipse(14999.611680, 40529.569800, 574.890417, 574.890417, 0.000000, X, Y) && !ellipse(32706.880524, 40246.922119, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24848.145142, 39336.812592, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23032.663932, 33820.486188, 511.653510, 369.902039, 319.870306, X, Y) && !ellipse(41039.825378, 33800.598602, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35931.380000, 33099.002000, 3559.776102, 2943.792085, 18.033000, X, Y) && !ellipse(19517.948151, 32553.693298, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29362.554220, 32301.419400, 429.974412, 429.974412, 0.000000, X, Y) && !ellipse(30256.049000, 31764.844800, 427.303212, 427.303212, 0.000000, X, Y) && !ellipse(31448.210785, 31277.279999, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23850.432000, 31375.805200, 435.393613, 435.393613, 0.000000, X, Y) && !ellipse(21549.131200, 31003.910200, 448.438413, 448.438413, 0.000000, X, Y) && !ellipse(34343.954000, 30534.022000, 414.956012, 414.956012, 0.000000, X, Y) && !ellipse(28224.456140, 30691.908000, 407.699212, 407.699212, 0.000000, X, Y) && !ellipse(17481.853400, 30407.813800, 524.523215, 524.523215, 0.000000, X, Y) && !ellipse(24812.838000, 30492.436000, 414.856812, 414.856812, 0.000000, X, Y) && !ellipse(35554.209880, 30096.473200, 435.412013, 435.412013, 0.000000, X, Y) && !ellipse(22936.289760, 29958.598800, 403.184812, 279.389608, 19.120900, X, Y) && !ellipse(35169.887482, 29526.338623, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19021.847961, 29612.454498, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34576.252136, 29783.305634, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27109.332360, 28857.898000, 1249.752036, 1249.752036, 0.000000, X, Y) && !ellipse(33764.478600, 29013.362800, 413.439212, 413.439212, 0.000000, X, Y) && !ellipse(27876.248000, 29080.346000, 2336.824067, 2336.824067, 0.000000, X, Y) && !ellipse(29675.145050, 27781.968445, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32471.461731, 27419.036560, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22824.994232, 27420.417175, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27705.830170, 27190.069489, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(27173.956116, 26753.094147, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28118.868000, 26916.762000, 3525.240101, 3525.240101, 0.000000, X, Y) && !ellipse(24156.510010, 26764.555908, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27758.207200, 25903.679000, 328.548009, 328.548009, 0.000000, X, Y) && !ellipse(39205.816101, 25789.913239, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32445.705292, 25352.274139, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33106.188260, 25033.424000, 419.917612, 419.917612, 0.000000, X, Y) && !ellipse(31596.296000, 24623.751000, 307.988809, 307.988809, 0.000000, X, Y) && !ellipse(28136.355900, 24343.151000, 355.780810, 355.780810, 0.000000, X, Y) && !ellipse(30232.233917, 23939.795898, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28390.240800, 25569.234600, 352.993610, 352.993610, 0.000000, X, Y) && !ellipse(27539.293460, 24184.015400, 380.317611, 380.317611, 0.000000, X, Y) && !ellipse(16017.780600, 24272.008800, 459.299213, 459.299213, 0.000000, X, Y) && !ellipse(32257.912415, 24476.682648, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21818.513800, 23563.185200, 417.008812, 417.008812, 0.000000, X, Y) && !ellipse(33896.046360, 23295.019400, 377.620011, 377.620011, 0.000000, X, Y) && !ellipse(33169.896240, 23072.169800, 422.608812, 422.608812, 0.000000, X, Y) && !ellipse(27194.565060, 22154.671800, 422.000812, 422.000812, 0.000000, X, Y) && !ellipse(34643.987244, 21142.320297, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24238.713060, 21485.494400, 452.784813, 452.784813, 0.000000, X, Y) && !ellipse(16440.814331, 21004.795090, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23079.194400, 20496.926400, 361.964930, 361.964930, 0.000000, X, Y) && !ellipse(30945.332800, 20203.676600, 485.541614, 403.992012, 160.945100, X, Y) && !ellipse(17180.641000, 17558.603400, 477.760014, 477.760014, 0.000000, X, Y) && !ellipse(38605.962677, 17025.952255, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20505.719940, 17011.288528, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25310.393707, 45241.674744, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23859.252930, 43890.556885, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27287.948000, 41989.692000, 408.754412, 408.754412, 0.000000, X, Y) && !ellipse(26207.838920, 37134.032000, 452.564813, 452.564813, 0.000000, X, Y) && !ellipse(38468.148071, 35882.353973, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29631.557434, 34386.029907, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39444.089050, 33696.510834, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27918.659973, 33496.966797, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24108.978000, 32224.854000, 1484.376043, 1484.376043, 0.000000, X, Y) && !ellipse(33795.843520, 32830.814200, 417.220812, 417.220812, 0.000000, X, Y) && !ellipse(22085.417236, 32568.006561, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35156.299400, 31685.242000, 1779.888051, 1779.888051, 0.000000, X, Y) && !ellipse(22331.960602, 31288.930267, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26830.514000, 30280.486000, 1354.816039, 1354.816039, 0.000000, X, Y) && !ellipse(24346.334000, 30209.696000, 1342.408039, 1342.408039, 0.000000, X, Y) && !ellipse(33876.155426, 29798.335754, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21022.995000, 29965.432000, 741.812021, 741.812021, 0.000000, X, Y) && !ellipse(22132.344879, 29700.354553, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24726.604140, 29502.123200, 658.736019, 658.736019, 0.000000, X, Y) && !ellipse(23958.500580, 28978.393677, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31796.155029, 29074.588043, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18190.770691, 29162.581024, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35623.052000, 29173.900000, 1690.832049, 1690.832049, 0.000000, X, Y) && !ellipse(23742.046661, 28585.773254, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24331.552000, 28416.186000, 676.592019, 676.592019, 0.000000, X, Y) && !ellipse(20520.962463, 28392.659698, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34621.392944, 28388.326691, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28963.737915, 28006.652954, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22008.084198, 26922.527496, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32953.166000, 26689.092000, 1530.248044, 1530.248044, 0.000000, X, Y) && !ellipse(34998.584991, 26389.108215, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31173.301086, 26040.075409, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23937.520538, 26150.644104, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23596.420959, 26559.221252, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31937.458344, 26034.611359, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29788.517456, 25796.327789, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31065.926392, 25179.243225, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24070.048981, 25290.109283, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30850.834503, 24648.550659, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25510.710358, 24495.137756, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29031.281860, 24846.830902, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23535.665924, 24830.807800, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39517.195282, 24508.935944, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29658.633423, 24339.253021, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31295.400574, 23879.842682, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25652.284485, 23883.501312, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28630.303406, 23789.438934, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34839.280579, 23555.198975, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13813.220779, 23263.777649, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39504.703369, 22851.634796, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26681.052582, 22459.617065, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31319.978180, 23075.501556, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36007.336823, 22050.281906, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20267.910294, 21887.682602, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26046.936005, 21533.861450, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26432.730347, 21280.936722, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23261.409363, 21230.321243, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28139.908875, 20862.077972, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35612.446350, 20752.706696, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36472.521851, 19551.198410, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15457.712738, 18039.422073, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24984.194153, 17616.675034, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21649.318054, 17195.210373, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24803.625610, 17188.535629, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jan 27 00:07:47 2012] Writing fullrun_pn_xmm0112570101_pi300-10000_pass1_cl_src106.gif
[Fri Jan 27 03:36:34 2012] Mean detx,y = (-1740.63, -3140.28) 
[Fri Jan 27 03:36:46 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jan 27 03:42:35 2012] Binned source spectrum to 10 counts/bin
[Fri Jan 27 03:42:36 2012] Setting source spectrum file to fullrun_pn_xmm0112570101_pi300-10000_pass1_cl_src106_src_b10.pi.gz
[Fri Jan 27 03:42:36 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112570101_pi300-10000_pass1_cl_src106_bgd.pi.gz
[Sat Jan 28 13:51:39 2012] Updating aperture counts using extracted products
[Sat Jan 28 13:51:39 2012] Error reading totcts from fullrun_pn_xmm0112570101_pi300-10000_pass1_cl_src106_src_b10.pi.gz
[Sat Jan 28 13:51:42 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jan 28 13:51:42 2012] Using photon index=1.80, rate=0.0192, arf fullrun_pn_xmm0112570101_pi300-10000_pass1_cl_src106.arf
[Sat Jan 28 13:51:42 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jan 28 13:51:42 2012] Updating source flux to 5.5e-14
[Sat Jan 28 14:07:25 2012] Flag b found in src. 106 procflags, skipping spectral fitting
[Sat Jan 28 14:07:25 2012] Flag c found in src. 106 procflags, skipping spectral fitting