[Wed Jan 25 01:03:55 2012] Detection parameters:
  Position = (301.3, 338.0) = 0 42 49.38 41 17 37.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 220.3 +/- 24.8
  Background counts = 89.4
  Rate = 0.004 +/- 0.0004

[Wed Jan 25 01:03:56 2012] Off-axis axis estimate = 2.87'
[Wed Jan 25 16:12:56 2012] Using EEF radius (= 7.87 ")to estimate initial spatial extent for simple fitting
[Wed Jan 25 16:12:56 2012] Initial guess for spatial extent in simple fitting = 7.87"
[Wed Jan 25 16:12:56 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.939
[Wed Jan 25 16:12:56 2012] Giving source the simple spatial ID 83 for pass 0, mean size = 7.87"
[Wed Jan 25 22:37:53 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_src83.ximg exists
[Wed Jan 25 22:37:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_src83.csv
[Wed Jan 25 22:37:53 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_src83_1.ximg exists
[Wed Jan 25 22:37:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_src83.csv
[Wed Jan 25 22:37:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_src83_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_src83.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan 25 22:37:55 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src83.ximg exists
[Wed Jan 25 22:37:55 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src83_1.ximg exists
[Wed Jan 25 22:37:55 2012] Fit fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src83 appears to have run properly
[Wed Jan 25 22:38:54 2012] Source 99 is offset by -0.493855 and -7.821982 pixels which is larger than
2 X fitted extent = 0.904064 x 0.904064, not incorporating fit results
[Wed Jan 25 22:38:54 2012] Source 99 is offset by 0.030226 and -8.265062 pixels which is larger than
2 X fitted extent = 0.904556 x 0.904556, not incorporating fit results
[Wed Jan 25 22:38:54 2012] Vigneting correction estimate = 1.000000
[Wed Jan 25 22:38:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 25 22:38:54 2012] Assessing source extent using major
[Wed Jan 25 22:38:54 2012] Source does appear to be extended
[Wed Jan 25 22:38:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 25 22:38:54 2012] Source is confused with source 102
[Thu Jan 26 18:45:16 2012] Using EEF radius (= 7.87 ")to estimate initial spatial extent for simple fitting
[Thu Jan 26 18:45:16 2012] Initial guess for spatial extent in simple fitting = 7.87"
[Thu Jan 26 18:45:16 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.939
[Thu Jan 26 18:45:16 2012] Giving source the simple spatial ID 83 for pass 1, mean size = 7.87"
[Fri Jan 27 00:06:07 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_src83.ximg exists
[Fri Jan 27 00:06:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_src83.csv
[Fri Jan 27 00:06:07 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_src83_1.ximg exists
[Fri Jan 27 00:06:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_src83.csv
[Fri Jan 27 00:06:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_src83_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_src83.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jan 27 00:06:08 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src83.ximg exists
[Fri Jan 27 00:06:08 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src83_1.ximg exists
[Fri Jan 27 00:06:08 2012] Fit fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src83 appears to have run properly
[Fri Jan 27 00:07:06 2012] Spatial fit model total counts = 2367.420000, observed total counts = 2367.000000
[Fri Jan 27 00:07:06 2012] Offset between fit and detection position for source 99 = 0.740619 pixels
[Fri Jan 27 00:07:06 2012] 2047.796500 total counts/ 1959.130000 bgd. counts: snr = 2.003217
Spatial fit parameters:
  Offset between fit and detection position for source 99 = 0.740619 pixels
  Position = (301.5, 338.7) = 0 42 49.30 41 17 40.8
  Extent = 5.9 (4.4-9.3)", rotation angle = 0
  Source counts = 88.7 +/- 45.3
  Background counts = 1959.1
  Rate = 0.001 +/- 0.0007
[Fri Jan 27 00:07:06 2012] Vigneting correction estimate = 1.000000
[Fri Jan 27 00:07:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan 27 00:07:06 2012] Assessing source extent using major axis lower bound
[Fri Jan 27 00:07:06 2012] Source does appear to be extended
[Fri Jan 27 00:07:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jan 28 08:48:11 2012] XMMSAS src. selection expression = ellipse(26179.427200, 29416.956800, 355.230610, 355.230610, 0.000000, X, Y)
[Sat Jan 28 08:48:11 2012] Writing source region out to fullrun_mos2_xmm0112570101_pi300-10000_pass1_cl_src99_src.reg
[Sat Jan 28 08:48:11 2012] Extracting stamp from image fullrun_mos2_xmm0112570101_pi300-10000_cl_sm2.00.img.gz, (281, 318) - (322, 359)
[Sat Jan 28 08:48:11 2012] XMMSAS bgd. selection expression = annulus(26179.427200, 29416.956800, 592.051017, 1184.102034, X, Y) && !ellipse(26682.092000, 27907.668000, 446.745613, 446.745613, 0.000000, X, Y) && !ellipse(25465.088600, 30879.632800, 406.448812, 346.452010, 4.084000, X, Y) && !ellipse(27656.610000, 27227.454000, 1127.632032, 1127.632032, 358.957000, X, Y) && !ellipse(28128.056824, 27705.301819, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27139.232145, 29133.944746, 1215.313826, 403.760462, 98.657810, X, Y) && !ellipse(24807.110000, 30508.554400, 310.551209, 225.767206, -0.000000, X, Y) && !ellipse(26200.593400, 30102.024600, 288.051208, 288.051208, 0.000000, X, Y) && !ellipse(26173.466736, 28755.246429, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25504.415283, 29349.532257, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25160.538544, 28832.874176, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jan 28 08:48:11 2012] Writing fullrun_mos2_xmm0112570101_pi300-10000_pass1_cl_src99.gif
[Sat Jan 28 09:40:02 2012] Mean detx,y = (2179.69, 1726.98) 
[Sat Jan 28 09:40:03 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jan 28 09:40:11 2012] Binned source spectrum to 10 counts/bin
[Sat Jan 28 09:40:11 2012] Setting source spectrum file to fullrun_mos2_xmm0112570101_pi300-10000_pass1_cl_src99_src_b10.pi.gz
[Sat Jan 28 09:40:11 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112570101_pi300-10000_pass1_cl_src99_bgd.pi.gz
[Sat Jan 28 13:30:53 2012] Not generating rmf since there are only 88 counts
[Sat Jan 28 13:30:53 2012] rmf not generated due to insufficient counts
[Sat Jan 28 13:51:49 2012] Updating aperture counts using extracted products
[Sat Jan 28 13:51:49 2012] Error reading totcts from fullrun_mos2_xmm0112570101_pi300-10000_pass1_cl_src99_src_b10.pi.gz
[Sat Jan 28 13:51:52 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jan 28 13:51:52 2012] Using photon index=1.80, rate=0.00139, arf fullrun_mos2_xmm0112570101_pi300-10000_pass1_cl_src99.arf
[Sat Jan 28 13:51:52 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jan 28 13:51:52 2012] Updating source flux to 1.6e-14
[Sat Jan 28 13:59:05 2012] Flag b found in src. 99 procflags, skipping spectral fitting
[Sat Jan 28 13:59:05 2012] Flag c found in src. 99 procflags, skipping spectral fitting
[Sat Jan 28 13:59:05 2012] Source 99 has fewer than 100.000000 counts, skipping spectral fitting