[Wed Jan 25 01:03:53 2012] Detection parameters:
  Position = (356.1, 265.3) = 0 42 28.25 41 12 22.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 4893.2 +/- 84.9
  Background counts = 65.2
  Rate = 0.09 +/- 0.002

[Wed Jan 25 01:03:56 2012] Off-axis axis estimate = 4.82'
[Wed Jan 25 16:12:56 2012] Using EEF radius (= 8.84 ")to estimate initial spatial extent for simple fitting
[Wed Jan 25 16:12:56 2012] Initial guess for spatial extent in simple fitting = 8.84"
[Wed Jan 25 16:12:56 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.975
[Wed Jan 25 16:12:56 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 8.84"
[Wed Jan 25 22:37:52 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_src9.ximg exists
[Wed Jan 25 22:37:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_src9.csv
[Wed Jan 25 22:37:52 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_src9_1.ximg exists
[Wed Jan 25 22:37:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_src9.csv
[Wed Jan 25 22:37:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan 25 22:37:54 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Wed Jan 25 22:37:54 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Wed Jan 25 22:37:54 2012] Fit fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Wed Jan 25 22:38:54 2012] Warning, spatial fit 9 centroid is now closest to src. 56
[Wed Jan 25 22:38:54 2012] Vigneting correction estimate = 1.000000
[Wed Jan 25 22:38:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 25 22:38:54 2012] Assessing source extent using major
[Wed Jan 25 22:38:54 2012] Source does appear to be extended
[Wed Jan 25 22:38:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan 26 18:45:16 2012] Using EEF radius (= 8.84 ")to estimate initial spatial extent for simple fitting
[Thu Jan 26 18:45:16 2012] Initial guess for spatial extent in simple fitting = 8.84"
[Thu Jan 26 18:45:16 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.975
[Thu Jan 26 18:45:16 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 8.84"
[Fri Jan 27 00:06:07 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_src9.ximg exists
[Fri Jan 27 00:06:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_src9.csv
[Fri Jan 27 00:06:07 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_src9_1.ximg exists
[Fri Jan 27 00:06:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_src9.csv
[Fri Jan 27 00:06:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jan 27 00:06:08 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Fri Jan 27 00:06:08 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Fri Jan 27 00:06:08 2012] Fit fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Fri Jan 27 00:07:06 2012] Spatial fit model total counts = 4974.690000, observed total counts = 4980.000000
[Fri Jan 27 00:07:06 2012] Offset between fit and detection position for source 8 = 0.180341 pixels
[Fri Jan 27 00:07:06 2012] 4994.030000 total counts/ 1658.560000 bgd. counts: snr = 81.901423
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.180341 pixels
  Position = (356.0, 265.5) = 0 42 28.27 41 12 22.1
  Extent = 5.1 (4.9-5.2)", rotation angle = 0
  Source counts = 3335.5 +/- 70.7
  Background counts = 1658.6
  Rate = 0.05 +/- 0.001
[Fri Jan 27 00:07:06 2012] Vigneting correction estimate = 1.000000
[Fri Jan 27 00:07:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan 27 00:07:06 2012] Assessing source extent using major axis lower bound
[Fri Jan 27 00:07:06 2012] Source does appear to be extended
[Fri Jan 27 00:07:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jan 28 08:48:07 2012] Counts = 3335.470000, rescaling region sizes by 2.000000
[Sat Jan 28 08:48:07 2012] XMMSAS src. selection expression = ellipse(30925.947900, 23046.840000, 610.582818, 610.582818, 0.000000, X, Y)
[Sat Jan 28 08:48:07 2012] Writing source region out to fullrun_mos2_xmm0112570101_pi300-10000_pass1_cl_src8_src.reg
[Sat Jan 28 08:48:07 2012] Extracting stamp from image fullrun_mos2_xmm0112570101_pi300-10000_cl_sm2.00.img.gz, (321, 230) - (391, 301)
[Sat Jan 28 08:48:08 2012] XMMSAS bgd. selection expression = annulus(30925.947900, 23046.840000, 2035.276059, 4070.552117, X, Y) && !ellipse(28623.103600, 27453.785600, 1088.311231, 1088.311231, 0.000000, X, Y) && !ellipse(32130.092000, 26899.288000, 303.677609, 303.677609, 0.000000, X, Y) && !ellipse(26383.662600, 26636.591600, 486.007214, 486.007214, 0.000000, X, Y) && !ellipse(33135.550000, 25046.398000, 534.864815, 283.299208, 0.000000, X, Y) && !ellipse(27656.610000, 27227.454000, 1127.632032, 1127.632032, 358.957000, X, Y) && !ellipse(33814.598000, 23294.978000, 448.556813, 448.556813, 0.000000, X, Y) && !ellipse(27696.151000, 27196.964600, 614.860018, 614.860018, 0.000000, X, Y) && !ellipse(30053.710478, 24059.917200, 441.231213, 441.231213, 0.000000, X, Y) && !ellipse(27195.976000, 22146.803800, 398.157611, 398.157611, 0.000000, X, Y) && !ellipse(32473.232635, 27416.915192, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30943.950000, 20201.734400, 452.936813, 364.569610, 351.305060, X, Y) && !ellipse(31923.191600, 24459.388000, 1231.008035, 1231.008035, 0.000000, X, Y) && !ellipse(31634.827820, 24594.844600, 288.560808, 288.560808, 0.000000, X, Y) && !ellipse(33161.473400, 23055.158600, 557.734416, 557.734416, 0.000000, X, Y) && !ellipse(28386.055880, 25546.927800, 410.037612, 321.473609, 49.478200, X, Y) && !ellipse(27141.402802, 26755.239410, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28128.056824, 27705.301819, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29667.652557, 27786.447479, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27619.037262, 26001.301361, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33234.461395, 22914.837769, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32454.458923, 25354.820312, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34656.777160, 21188.832400, 402.584812, 402.584812, 0.000000, X, Y) && !ellipse(28128.983040, 24326.131600, 337.733610, 337.733610, 0.000000, X, Y) && !ellipse(32098.148682, 25110.716919, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27502.343414, 24160.811157, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34312.156000, 23461.389200, 1645.960047, 1645.960047, 0.000000, X, Y) && !ellipse(35612.520691, 20761.456345, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34972.417023, 26400.899200, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28120.589400, 20874.399400, 385.381611, 385.381611, 0.000000, X, Y) && !ellipse(26077.022797, 21597.152039, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29956.081665, 26761.484039, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29902.070404, 26320.762451, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27498.902496, 24746.831879, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31491.548828, 27026.315247, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29135.337769, 24927.963287, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29440.525421, 25795.664032, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jan 28 08:48:08 2012] Writing fullrun_mos2_xmm0112570101_pi300-10000_pass1_cl_src8.gif
[Sat Jan 28 08:53:30 2012] Mean detx,y = (-4497.23, -2561.97) 
[Sat Jan 28 08:53:32 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jan 28 08:54:01 2012] Binned source spectrum to 10 counts/bin
[Sat Jan 28 08:54:01 2012] Setting source spectrum file to fullrun_mos2_xmm0112570101_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Sat Jan 28 08:54:01 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112570101_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Sat Jan 28 13:51:48 2012] Updating aperture counts using extracted products
[Sat Jan 28 13:51:48 2012] Error reading totcts from fullrun_mos2_xmm0112570101_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Sat Jan 28 13:51:50 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jan 28 13:51:50 2012] Using photon index=1.80, rate=0.0525, arf fullrun_mos2_xmm0112570101_pi300-10000_pass1_cl_src8.arf
[Sat Jan 28 13:51:50 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jan 28 13:51:50 2012] Updating source flux to 6.1e-13