[Wed Jan 25 01:03:55 2012] Detection parameters:
  Position = (352.9, 495.7) = 0 42 29.38 41 29 4.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 193.7 +/- 17.5
  Background counts = 17.6
  Rate = 0.003 +/- 0.0003

[Wed Jan 25 01:03:56 2012] Off-axis axis estimate = 14.84'
[Wed Jan 25 16:12:56 2012] Using EEF radius (= 13.85 ")to estimate initial spatial extent for simple fitting
[Wed Jan 25 16:12:56 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jan 25 16:12:56 2012] Initial guess for spatial extent in simple fitting = 13.85"
[Wed Jan 25 16:12:56 2012] source mask rpix=3.2, npix_max = 54, mask sum = 55, frac = 1.013
[Wed Jan 25 16:12:56 2012] Giving source the simple spatial ID 91 for pass 0, mean size = 13.85"
[Wed Jan 25 22:37:53 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_src91.ximg exists
[Wed Jan 25 22:37:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_src91.csv
[Wed Jan 25 22:37:53 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_src91_1.ximg exists
[Wed Jan 25 22:37:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_src91.csv
[Wed Jan 25 22:37:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_src91_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_src91.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan 25 22:37:55 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src91.ximg exists
[Wed Jan 25 22:37:55 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src91_1.ximg exists
[Wed Jan 25 22:37:55 2012] Fit fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src91 appears to have run properly
[Wed Jan 25 22:38:54 2012] Warning: source 91 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 79 at 17.152067 pixels away
[Wed Jan 25 22:38:54 2012] Vigneting correction estimate = 1.000000
[Wed Jan 25 22:38:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 25 22:38:54 2012] Assessing source extent using major
[Wed Jan 25 22:38:54 2012] Source does appear to be extended
[Wed Jan 25 22:38:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan 26 18:45:16 2012] Using EEF radius (= 13.85 ")to estimate initial spatial extent for simple fitting
[Thu Jan 26 18:45:16 2012] Initial guess for spatial extent in simple fitting = 13.85"
[Thu Jan 26 18:45:16 2012] source mask rpix=3.2, npix_max = 54, mask sum = 55, frac = 1.013
[Thu Jan 26 18:45:16 2012] Giving source the simple spatial ID 91 for pass 1, mean size = 13.85"
[Fri Jan 27 00:06:07 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_src91.ximg exists
[Fri Jan 27 00:06:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_src91.csv
[Fri Jan 27 00:06:07 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_src91_1.ximg exists
[Fri Jan 27 00:06:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_src91.csv
[Fri Jan 27 00:06:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_src91_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_src91.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jan 27 00:06:09 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src91.ximg exists
[Fri Jan 27 00:06:09 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src91_1.ximg exists
[Fri Jan 27 00:06:09 2012] Fit fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src91 appears to have run properly
[Fri Jan 27 00:07:06 2012] Spatial fit model total counts = 302.635000, observed total counts = 302.000000
[Fri Jan 27 00:07:06 2012] Offset between fit and detection position for source 79 = 0.069813 pixels
[Fri Jan 27 00:07:06 2012] 291.567000 total counts/ 152.975000 bgd. counts: snr = 11.205415
Spatial fit parameters:
  Offset between fit and detection position for source 79 = 0.069813 pixels
  Position = (352.9, 495.7) = 0 42 29.40 41 29 3.6
  Extent = 5.9 (5.0-7.0)", rotation angle = 0
  Source counts = 138.6 +/- 17.1
  Background counts = 153.0
  Rate = 0.002 +/- 0.0003
[Fri Jan 27 00:07:06 2012] Vigneting correction estimate = 1.000000
[Fri Jan 27 00:07:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan 27 00:07:06 2012] Assessing source extent using major axis lower bound
[Fri Jan 27 00:07:06 2012] Source does appear to be extended
[Fri Jan 27 00:07:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jan 28 08:48:11 2012] XMMSAS src. selection expression = ellipse(30650.760400, 43075.131000, 353.108744, 353.108744, 0.000000, X, Y)
[Sat Jan 28 08:48:11 2012] Writing source region out to fullrun_mos2_xmm0112570101_pi300-10000_pass1_cl_src79_src.reg
[Sat Jan 28 08:48:11 2012] Extracting stamp from image fullrun_mos2_xmm0112570101_pi300-10000_cl_sm2.00.img.gz, (333, 475) - (373, 516)
[Sat Jan 28 08:48:11 2012] XMMSAS bgd. selection expression = annulus(30650.760400, 43075.131000, 588.514573, 1177.029147, X, Y)
[Sat Jan 28 08:48:11 2012] Writing fullrun_mos2_xmm0112570101_pi300-10000_pass1_cl_src79.gif
[Sat Jan 28 09:42:46 2012] Mean detx,y = (2761.14, 16098.46) 
[Sat Jan 28 09:42:47 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jan 28 09:42:57 2012] Binned source spectrum to 10 counts/bin
[Sat Jan 28 09:42:57 2012] Setting source spectrum file to fullrun_mos2_xmm0112570101_pi300-10000_pass1_cl_src79_src_b10.pi.gz
[Sat Jan 28 09:42:57 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112570101_pi300-10000_pass1_cl_src79_bgd.pi.gz
[Sat Jan 28 13:51:49 2012] Updating aperture counts using extracted products
[Sat Jan 28 13:51:49 2012] Error reading totcts from fullrun_mos2_xmm0112570101_pi300-10000_pass1_cl_src79_src_b10.pi.gz
[Sat Jan 28 13:51:52 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jan 28 13:51:52 2012] Using photon index=1.80, rate=0.00218, arf fullrun_mos2_xmm0112570101_pi300-10000_pass1_cl_src79.arf
[Sat Jan 28 13:51:52 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jan 28 13:51:52 2012] Updating source flux to 8.6e-14