[Wed Jan 25 01:03:55 2012] Detection parameters:
  Position = (451.4, 297.0) = 0 41 51.49 41 14 37.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 222.6 +/- 19.1
  Background counts = 19.5
  Rate = 0.007 +/- 0.0006

[Wed Jan 25 01:03:56 2012] Off-axis axis estimate = 11.09'
[Wed Jan 25 16:12:56 2012] Using EEF radius (= 11.97 ")to estimate initial spatial extent for simple fitting
[Wed Jan 25 16:12:56 2012] Initial guess for spatial extent in simple fitting = 11.97"
[Wed Jan 25 16:12:56 2012] source mask rpix=2.8, npix_max = 42, mask sum = 42, frac = 0.993
[Wed Jan 25 16:12:56 2012] Giving source the simple spatial ID 68 for pass 0, mean size = 11.97"
[Wed Jan 25 22:37:53 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_src68.ximg exists
[Wed Jan 25 22:37:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_src68.csv
[Wed Jan 25 22:37:53 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_src68_1.ximg exists
[Wed Jan 25 22:37:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_src68.csv
[Wed Jan 25 22:37:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_src68_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_src68.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan 25 22:37:55 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src68.ximg exists
[Wed Jan 25 22:37:55 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src68_1.ximg exists
[Wed Jan 25 22:37:55 2012] Fit fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src68 appears to have run properly
[Wed Jan 25 22:38:54 2012] Warning: source 68 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 70 at 16.041714 pixels away
[Wed Jan 25 22:38:54 2012] Vigneting correction estimate = 1.000000
[Wed Jan 25 22:38:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 25 22:38:54 2012] Assessing source extent using major
[Wed Jan 25 22:38:54 2012] Source does appear to be extended
[Wed Jan 25 22:38:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan 26 18:45:16 2012] Using EEF radius (= 11.97 ")to estimate initial spatial extent for simple fitting
[Thu Jan 26 18:45:16 2012] Initial guess for spatial extent in simple fitting = 11.97"
[Thu Jan 26 18:45:16 2012] source mask rpix=2.8, npix_max = 42, mask sum = 42, frac = 0.993
[Thu Jan 26 18:45:16 2012] Giving source the simple spatial ID 68 for pass 1, mean size = 11.97"
[Fri Jan 27 00:06:07 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_src68.ximg exists
[Fri Jan 27 00:06:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_src68.csv
[Fri Jan 27 00:06:07 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_src68_1.ximg exists
[Fri Jan 27 00:06:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_src68.csv
[Fri Jan 27 00:06:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_src68_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_src68.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jan 27 00:06:08 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src68.ximg exists
[Fri Jan 27 00:06:08 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src68_1.ximg exists
[Fri Jan 27 00:06:08 2012] Fit fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src68 appears to have run properly
[Fri Jan 27 00:07:06 2012] Warning: source 68 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 70 at 15.854262 pixels away
[Fri Jan 27 00:07:06 2012] Vigneting correction estimate = 1.000000
[Fri Jan 27 00:07:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan 27 00:07:06 2012] Assessing source extent using major
[Fri Jan 27 00:07:06 2012] Source does appear to be extended
[Fri Jan 27 00:07:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jan 28 08:48:10 2012] XMMSAS src. selection expression = ellipse(39220.187775, 25787.983032, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jan 28 08:48:10 2012] Writing source region out to fullrun_mos2_xmm0112570101_pi300-10000_pass1_cl_src70_src.reg
[Sat Jan 28 08:48:10 2012] Extracting stamp from image fullrun_mos2_xmm0112570101_pi300-10000_cl_sm2.00.img.gz, (414, 259) - (489, 334)
[Sat Jan 28 08:48:10 2012] XMMSAS bgd. selection expression = annulus(39220.187775, 25787.983032, 1087.500000, 2175.000000, X, Y) && !ellipse(39522.473480, 24509.918304, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jan 28 08:48:10 2012] Writing fullrun_mos2_xmm0112570101_pi300-10000_pass1_cl_src70.gif
[Sat Jan 28 09:35:29 2012] Mean detx,y = (-11312.34, 2921.36) 
[Sat Jan 28 09:35:30 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jan 28 09:35:35 2012] Binned source spectrum to 10 counts/bin
[Sat Jan 28 09:35:35 2012] Setting source spectrum file to fullrun_mos2_xmm0112570101_pi300-10000_pass1_cl_src70_src_b10.pi.gz
[Sat Jan 28 09:35:35 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112570101_pi300-10000_pass1_cl_src70_bgd.pi.gz
[Sat Jan 28 13:02:04 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jan 28 13:02:04 2012] rmf not generated due to insufficient counts
[Sat Jan 28 13:51:49 2012] Updating aperture counts using extracted products
[Sat Jan 28 13:51:49 2012] Error reading totcts from fullrun_mos2_xmm0112570101_pi300-10000_pass1_cl_src70_src_b10.pi.gz
[Sat Jan 28 13:51:51 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jan 28 13:51:51 2012] Using photon index=1.80, rate=0.00689, arf fullrun_mos2_xmm0112570101_pi300-10000_pass1_cl_src70.arf
[Sat Jan 28 13:51:51 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jan 28 13:51:51 2012] Updating source flux to 1.3e-13
[Sat Jan 28 13:59:05 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting