[Wed Jan 25 01:03:55 2012] Detection parameters:
  Position = (278.4, 308.3) = 0 42 58.18 41 15 29.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 533.1 +/- 33.3
  Background counts = 84.9
  Rate = 0.009 +/- 0.0006

[Wed Jan 25 01:03:56 2012] Off-axis axis estimate = 1.62'
[Wed Jan 25 16:12:56 2012] Using EEF radius (= 7.24 ")to estimate initial spatial extent for simple fitting
[Wed Jan 25 16:12:56 2012] Initial guess for spatial extent in simple fitting = 7.24"
[Wed Jan 25 16:12:56 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.068
[Wed Jan 25 16:12:56 2012] Giving source the simple spatial ID 62 for pass 0, mean size = 7.24"
[Wed Jan 25 22:37:53 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_src62.ximg exists
[Wed Jan 25 22:37:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_src62.csv
[Wed Jan 25 22:37:53 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_src62_1.ximg exists
[Wed Jan 25 22:37:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_src62.csv
[Wed Jan 25 22:37:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_src62_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_src62.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan 25 22:37:55 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src62.ximg exists
[Wed Jan 25 22:37:55 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src62_1.ximg exists
[Wed Jan 25 22:37:55 2012] Fit fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src62 appears to have run properly
[Wed Jan 25 22:38:54 2012] Warning, spatial fit 62 centroid is now closest to src. 113
[Wed Jan 25 22:38:54 2012] Vigneting correction estimate = 1.000000
[Wed Jan 25 22:38:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 25 22:38:54 2012] Assessing source extent using major
[Wed Jan 25 22:38:54 2012] Source does appear to be extended
[Wed Jan 25 22:38:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 25 22:38:54 2012] Source is confused with source 113
[Thu Jan 26 18:45:16 2012] Using EEF radius (= 7.24 ")to estimate initial spatial extent for simple fitting
[Thu Jan 26 18:45:16 2012] Initial guess for spatial extent in simple fitting = 7.24"
[Thu Jan 26 18:45:16 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.068
[Thu Jan 26 18:45:16 2012] Giving source the simple spatial ID 62 for pass 1, mean size = 7.24"
[Fri Jan 27 00:06:07 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_src62.ximg exists
[Fri Jan 27 00:06:07 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_src62_1.ximg exists
[Fri Jan 27 00:06:07 2012] Fit fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_src62 appears to have run properly
[Fri Jan 27 00:06:08 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src62.ximg exists
[Fri Jan 27 00:06:08 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src62_1.ximg exists
[Fri Jan 27 00:06:08 2012] Fit fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src62 appears to have run properly
[Fri Jan 27 00:07:06 2012] Source 69 is offset by -6.206614 and -7.358774 pixels which is larger than
2 X fitted extent = 0.831784 x 0.831784, not incorporating fit results
[Fri Jan 27 00:07:06 2012] Vigneting correction estimate = 1.000000
[Fri Jan 27 00:07:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan 27 00:07:06 2012] Assessing source extent using major
[Fri Jan 27 00:07:06 2012] Source does appear to be extended
[Fri Jan 27 00:07:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jan 28 08:48:10 2012] XMMSAS src. selection expression = ellipse(24176.446625, 26773.208649, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jan 28 08:48:10 2012] Writing source region out to fullrun_mos2_xmm0112570101_pi300-10000_pass1_cl_src69_src.reg
[Sat Jan 28 08:48:10 2012] Extracting stamp from image fullrun_mos2_xmm0112570101_pi300-10000_cl_sm2.00.img.gz, (241, 271) - (316, 346)
[Sat Jan 28 08:48:10 2012] XMMSAS bgd. selection expression = annulus(24176.446625, 26773.208649, 1087.500000, 2175.000000, X, Y) && !ellipse(26682.092000, 27907.668000, 446.745613, 446.745613, 0.000000, X, Y) && !ellipse(26383.662600, 26636.591600, 486.007214, 486.007214, 0.000000, X, Y) && !ellipse(23085.579800, 26681.375115, 464.166433, 379.313825, 56.352591, X, Y) && !ellipse(24913.193248, 27456.407994, 325.671986, 325.239337, 88.752114, X, Y) && !ellipse(25465.169800, 26983.381600, 300.711209, 300.711209, 0.000000, X, Y) && !ellipse(22317.730000, 28107.784000, 1258.200036, 1258.200036, 0.000000, X, Y) && !ellipse(23803.056420, 27511.280480, 369.652811, 369.652811, 0.000000, X, Y) && !ellipse(27141.402802, 26755.239410, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27139.232145, 29133.944746, 1215.313826, 403.760462, 98.657810, X, Y) && !ellipse(22819.883301, 27425.772369, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26173.466736, 28755.246429, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26179.427200, 29416.956800, 473.640814, 473.640814, 0.000000, X, Y) && !ellipse(25504.415283, 29349.532257, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25160.538544, 28832.874176, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24516.532000, 26255.578000, 1157.840033, 1157.840033, 0.000000, X, Y)
[Sat Jan 28 08:48:10 2012] Writing fullrun_mos2_xmm0112570101_pi300-10000_pass1_cl_src69.gif
[Sat Jan 28 09:33:35 2012] Mean detx,y = (3173.10, -1366.16) 
[Sat Jan 28 09:33:36 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jan 28 09:33:45 2012] Binned source spectrum to 10 counts/bin
[Sat Jan 28 09:33:45 2012] Setting source spectrum file to fullrun_mos2_xmm0112570101_pi300-10000_pass1_cl_src69_src_b10.pi.gz
[Sat Jan 28 09:33:45 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112570101_pi300-10000_pass1_cl_src69_bgd.pi.gz
[Sat Jan 28 12:54:34 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jan 28 12:54:34 2012] rmf not generated due to insufficient counts
[Sat Jan 28 13:51:49 2012] Updating aperture counts using extracted products
[Sat Jan 28 13:51:49 2012] Error reading totcts from fullrun_mos2_xmm0112570101_pi300-10000_pass1_cl_src69_src_b10.pi.gz
[Sat Jan 28 13:51:51 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jan 28 13:51:51 2012] Using photon index=1.80, rate=0.00919, arf fullrun_mos2_xmm0112570101_pi300-10000_pass1_cl_src69.arf
[Sat Jan 28 13:51:51 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jan 28 13:51:51 2012] Updating source flux to 9.2e-14
[Sat Jan 28 13:59:05 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting