[Wed Jan 25 01:03:55 2012] Detection parameters:
  Position = (262.9, 315.8) = 0 43 4.20 41 16 1.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 526.3 +/- 32.4
  Background counts = 70.3
  Rate = 0.01 +/- 0.0006

[Wed Jan 25 01:03:56 2012] Off-axis axis estimate = 2.87'
[Wed Jan 25 16:12:56 2012] Using EEF radius (= 7.86 ")to estimate initial spatial extent for simple fitting
[Wed Jan 25 16:12:56 2012] Initial guess for spatial extent in simple fitting = 7.86"
[Wed Jan 25 16:12:56 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.939
[Wed Jan 25 16:12:56 2012] Giving source the simple spatial ID 59 for pass 0, mean size = 7.86"
[Wed Jan 25 22:37:53 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_src59.ximg exists
[Wed Jan 25 22:37:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_src59.csv
[Wed Jan 25 22:37:53 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_src59_1.ximg exists
[Wed Jan 25 22:37:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_src59.csv
[Wed Jan 25 22:37:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_src59_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan 25 22:37:54 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src59.ximg exists
[Wed Jan 25 22:37:54 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src59_1.ximg exists
[Wed Jan 25 22:37:54 2012] Fit fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src59 appears to have run properly
[Wed Jan 25 22:38:54 2012] Warning, spatial fit 59 centroid is now closest to src. 16
[Wed Jan 25 22:38:54 2012] Vigneting correction estimate = 1.000000
[Wed Jan 25 22:38:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 25 22:38:54 2012] Assessing source extent using major
[Wed Jan 25 22:38:54 2012] Source does appear to be extended
[Wed Jan 25 22:38:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 25 22:38:54 2012] Source is confused with source 16
[Thu Jan 26 18:45:16 2012] Using EEF radius (= 7.86 ")to estimate initial spatial extent for simple fitting
[Thu Jan 26 18:45:16 2012] Initial guess for spatial extent in simple fitting = 7.86"
[Thu Jan 26 18:45:16 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.939
[Thu Jan 26 18:45:16 2012] Giving source the simple spatial ID 59 for pass 1, mean size = 7.86"
[Fri Jan 27 00:06:07 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_src59.ximg exists
[Fri Jan 27 00:06:07 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_src59_1.ximg exists
[Fri Jan 27 00:06:07 2012] Fit fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_src59 appears to have run properly
[Fri Jan 27 00:06:08 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src59.ximg exists
[Fri Jan 27 00:06:08 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src59_1.ximg exists
[Fri Jan 27 00:06:08 2012] Fit fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src59 appears to have run properly
[Fri Jan 27 00:07:06 2012] Source 68 is offset by -3.308491 and 6.027246 pixels which is larger than
2 X fitted extent = 2.488966 x 2.488966, not incorporating fit results
[Fri Jan 27 00:07:06 2012] Vigneting correction estimate = 1.000000
[Fri Jan 27 00:07:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan 27 00:07:06 2012] Assessing source extent using major
[Fri Jan 27 00:07:06 2012] Source does appear to be extended
[Fri Jan 27 00:07:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jan 28 08:48:10 2012] XMMSAS src. selection expression = ellipse(22819.883301, 27425.772369, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jan 28 08:48:10 2012] Writing source region out to fullrun_mos2_xmm0112570101_pi300-10000_pass1_cl_src68_src.reg
[Sat Jan 28 08:48:10 2012] Extracting stamp from image fullrun_mos2_xmm0112570101_pi300-10000_cl_sm2.00.img.gz, (225, 278) - (300, 353)
[Sat Jan 28 08:48:10 2012] XMMSAS bgd. selection expression = annulus(22819.883301, 27425.772369, 1087.500000, 2175.000000, X, Y) && !ellipse(23085.579800, 26681.375115, 464.166433, 379.313825, 56.352591, X, Y) && !ellipse(21382.145000, 26018.770200, 427.772812, 381.827211, 77.146808, X, Y) && !ellipse(24913.193248, 27456.407994, 325.671986, 325.239337, 88.752114, X, Y) && !ellipse(22317.730000, 28107.784000, 1258.200036, 1258.200036, 0.000000, X, Y) && !ellipse(23803.056420, 27511.280480, 369.652811, 369.652811, 0.000000, X, Y) && !ellipse(22908.121400, 29894.904800, 345.339210, 345.339210, 0.000000, X, Y) && !ellipse(24176.446625, 26773.208649, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21240.762146, 29990.647491, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25504.415283, 29349.532257, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25160.538544, 28832.874176, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24516.532000, 26255.578000, 1157.840033, 1157.840033, 0.000000, X, Y)
[Sat Jan 28 08:48:10 2012] Writing fullrun_mos2_xmm0112570101_pi300-10000_pass1_cl_src68.gif
[Sat Jan 28 09:32:51 2012] Mean detx,y = (4472.74, -1436.66) 
[Sat Jan 28 09:32:52 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jan 28 09:33:02 2012] Binned source spectrum to 10 counts/bin
[Sat Jan 28 09:33:02 2012] Setting source spectrum file to fullrun_mos2_xmm0112570101_pi300-10000_pass1_cl_src68_src_b10.pi.gz
[Sat Jan 28 09:33:02 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112570101_pi300-10000_pass1_cl_src68_bgd.pi.gz
[Sat Jan 28 12:47:24 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jan 28 12:47:24 2012] rmf not generated due to insufficient counts
[Sat Jan 28 13:51:49 2012] Updating aperture counts using extracted products
[Sat Jan 28 13:51:49 2012] Error reading totcts from fullrun_mos2_xmm0112570101_pi300-10000_pass1_cl_src68_src_b10.pi.gz
[Sat Jan 28 13:51:51 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jan 28 13:51:51 2012] Using photon index=1.80, rate=0.00978, arf fullrun_mos2_xmm0112570101_pi300-10000_pass1_cl_src68.arf
[Sat Jan 28 13:51:51 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jan 28 13:51:51 2012] Updating source flux to 1.2e-13
[Sat Jan 28 13:59:05 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting