[Wed Jan 25 01:03:55 2012] Detection parameters:
  Position = (338.2, 371.5) = 0 42 35.12 41 20 5.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 382.2 +/- 26.5
  Background counts = 38.5
  Rate = 0.009 +/- 0.0006

[Wed Jan 25 01:03:56 2012] Off-axis axis estimate = 6.03'
[Wed Jan 25 16:12:56 2012] Using EEF radius (= 9.44 ")to estimate initial spatial extent for simple fitting
[Wed Jan 25 16:12:56 2012] Initial guess for spatial extent in simple fitting = 9.44"
[Wed Jan 25 16:12:56 2012] source mask rpix=2.2, npix_max = 28, mask sum = 21, frac = 0.736
[Wed Jan 25 16:12:56 2012] Giving source the simple spatial ID 63 for pass 0, mean size = 9.44"
[Wed Jan 25 22:37:53 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_src63.ximg exists
[Wed Jan 25 22:37:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_src63.csv
[Wed Jan 25 22:37:53 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_src63_1.ximg exists
[Wed Jan 25 22:37:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_src63.csv
[Wed Jan 25 22:37:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_src63_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan 25 22:37:55 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src63.ximg exists
[Wed Jan 25 22:37:55 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src63_1.ximg exists
[Wed Jan 25 22:37:55 2012] Fit fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src63 appears to have run properly
[Wed Jan 25 22:38:54 2012] Warning: source 48 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 63 at 10.923815 pixels away
[Wed Jan 25 22:38:54 2012] Warning, spatial fit 63 centroid is now closest to src. 89
[Wed Jan 25 22:38:54 2012] Source 63 is offset by 7.249142 and -5.547055 pixels which is larger than
2 X fitted extent = 1.114607 x 1.114607, not incorporating fit results
[Wed Jan 25 22:38:54 2012] Vigneting correction estimate = 1.000000
[Wed Jan 25 22:38:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 25 22:38:54 2012] Assessing source extent using major
[Wed Jan 25 22:38:54 2012] Source does appear to be extended
[Wed Jan 25 22:38:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan 26 18:45:16 2012] Using EEF radius (= 9.44 ")to estimate initial spatial extent for simple fitting
[Thu Jan 26 18:45:16 2012] Initial guess for spatial extent in simple fitting = 9.44"
[Thu Jan 26 18:45:16 2012] source mask rpix=2.2, npix_max = 28, mask sum = 21, frac = 0.736
[Thu Jan 26 18:45:16 2012] Giving source the simple spatial ID 63 for pass 1, mean size = 9.44"
[Fri Jan 27 00:06:07 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_src63.ximg exists
[Fri Jan 27 00:06:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_src63.csv
[Fri Jan 27 00:06:07 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_src63_1.ximg exists
[Fri Jan 27 00:06:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_src63.csv
[Fri Jan 27 00:06:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_src63_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jan 27 00:06:08 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src63.ximg exists
[Fri Jan 27 00:06:08 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src63_1.ximg exists
[Fri Jan 27 00:06:08 2012] Fit fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src63 appears to have run properly
[Fri Jan 27 00:07:06 2012] Warning: source 48 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 63 at 10.923815 pixels away
[Fri Jan 27 00:07:06 2012] Warning, spatial fit 63 centroid is now closest to src. 89
[Fri Jan 27 00:07:06 2012] Vigneting correction estimate = 1.000000
[Fri Jan 27 00:07:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan 27 00:07:06 2012] Assessing source extent using major
[Fri Jan 27 00:07:06 2012] Source does appear to be extended
[Fri Jan 27 00:07:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jan 28 08:48:10 2012] XMMSAS src. selection expression = ellipse(29371.943359, 32275.138245, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jan 28 08:48:10 2012] Writing source region out to fullrun_mos2_xmm0112570101_pi300-10000_pass1_cl_src63_src.reg
[Sat Jan 28 08:48:10 2012] Extracting stamp from image fullrun_mos2_xmm0112570101_pi300-10000_cl_sm2.00.img.gz, (301, 334) - (376, 409)
[Sat Jan 28 08:48:10 2012] XMMSAS bgd. selection expression = annulus(29371.943359, 32275.138245, 1087.500000, 2175.000000, X, Y) && !ellipse(30263.511200, 31760.018400, 356.492010, 356.492010, 0.000000, X, Y) && !ellipse(28242.069092, 30678.236359, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27139.232145, 29133.944746, 1215.313826, 403.760462, 98.657810, X, Y) && !ellipse(31448.680725, 31277.484436, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29613.062930, 34354.056778, 611.511856, 356.304073, 31.382391, X, Y) && !ellipse(27903.095600, 33506.398200, 302.628009, 302.628009, 0.000000, X, Y) && !ellipse(26744.882141, 33779.642456, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jan 28 08:48:10 2012] Writing fullrun_mos2_xmm0112570101_pi300-10000_pass1_cl_src63.gif
[Sat Jan 28 09:33:51 2012] Mean detx,y = (142.21, 5508.85) 
[Sat Jan 28 09:33:52 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jan 28 09:34:19 2012] Binned source spectrum to 10 counts/bin
[Sat Jan 28 09:34:19 2012] Setting source spectrum file to fullrun_mos2_xmm0112570101_pi300-10000_pass1_cl_src63_src_b10.pi.gz
[Sat Jan 28 09:34:19 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112570101_pi300-10000_pass1_cl_src63_bgd.pi.gz
[Sat Jan 28 12:54:35 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jan 28 12:54:35 2012] rmf not generated due to insufficient counts
[Sat Jan 28 13:51:49 2012] Updating aperture counts using extracted products
[Sat Jan 28 13:51:49 2012] Error reading totcts from fullrun_mos2_xmm0112570101_pi300-10000_pass1_cl_src63_src_b10.pi.gz
[Sat Jan 28 13:51:51 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jan 28 13:51:51 2012] Using photon index=1.80, rate=0.00898, arf fullrun_mos2_xmm0112570101_pi300-10000_pass1_cl_src63.arf
[Sat Jan 28 13:51:51 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jan 28 13:51:51 2012] Updating source flux to 1.2e-13
[Sat Jan 28 13:59:05 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting