[Wed Jan 25 01:03:55 2012] Detection parameters:
  Position = (314.4, 483.3) = 0 42 44.30 41 28 11.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 152.8 +/- 16.5
  Background counts = 17.6
  Rate = 0.002 +/- 0.0003

[Wed Jan 25 01:03:56 2012] Off-axis axis estimate = 13.45'
[Wed Jan 25 16:12:56 2012] Using EEF radius (= 13.15 ")to estimate initial spatial extent for simple fitting
[Wed Jan 25 16:12:56 2012] Initial guess for spatial extent in simple fitting = 13.15"
[Wed Jan 25 16:12:56 2012] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.987
[Wed Jan 25 16:12:56 2012] Giving source the simple spatial ID 102 for pass 0, mean size = 13.15"
[Wed Jan 25 22:38:54 2012] Vigneting correction estimate = 1.000000
[Wed Jan 25 22:38:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 25 22:38:54 2012] Assessing source extent using major
[Wed Jan 25 22:38:54 2012] Source does appear to be extended
[Wed Jan 25 22:38:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan 26 18:45:16 2012] Using EEF radius (= 13.15 ")to estimate initial spatial extent for simple fitting
[Thu Jan 26 18:45:16 2012] Initial guess for spatial extent in simple fitting = 13.15"
[Thu Jan 26 18:45:16 2012] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.987
[Thu Jan 26 18:45:16 2012] Giving source the simple spatial ID 100 for pass 1, mean size = 13.15"
[Fri Jan 27 00:06:07 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_src100.ximg exists
[Fri Jan 27 00:06:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_src100.csv
[Fri Jan 27 00:06:07 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_src100_1.ximg exists
[Fri Jan 27 00:06:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_src100.csv
[Fri Jan 27 00:06:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_src100_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_src100.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jan 27 00:06:09 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src100.ximg exists
[Fri Jan 27 00:06:09 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src100_1.ximg exists
[Fri Jan 27 00:06:09 2012] Fit fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src100 appears to have run properly
[Fri Jan 27 00:07:06 2012] Warning: source 100 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 60 at 16.704884 pixels away
[Fri Jan 27 00:07:06 2012] Vigneting correction estimate = 1.000000
[Fri Jan 27 00:07:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan 27 00:07:06 2012] Assessing source extent using major
[Fri Jan 27 00:07:06 2012] Source does appear to be extended
[Fri Jan 27 00:07:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jan 28 08:48:11 2012] XMMSAS src. selection expression = ellipse(27302.127655, 41995.670441, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jan 28 08:48:11 2012] Writing source region out to fullrun_mos2_xmm0112570101_pi300-10000_pass1_cl_src60_src.reg
[Sat Jan 28 08:48:11 2012] Extracting stamp from image fullrun_mos2_xmm0112570101_pi300-10000_cl_sm2.00.img.gz, (277, 446) - (352, 521)
[Sat Jan 28 08:48:11 2012] XMMSAS bgd. selection expression = annulus(27302.127655, 41995.670441, 1087.500000, 2175.000000, X, Y) && !ellipse(24864.563843, 39352.270172, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jan 28 08:48:11 2012] Writing fullrun_mos2_xmm0112570101_pi300-10000_pass1_cl_src60.gif
[Sat Jan 28 09:44:34 2012] Mean detx,y = (5555.61, 13939.68) 
[Sat Jan 28 09:44:35 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jan 28 09:44:49 2012] Binned source spectrum to 10 counts/bin
[Sat Jan 28 09:44:49 2012] Setting source spectrum file to fullrun_mos2_xmm0112570101_pi300-10000_pass1_cl_src60_src_b10.pi.gz
[Sat Jan 28 09:44:49 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112570101_pi300-10000_pass1_cl_src60_bgd.pi.gz
[Sat Jan 28 13:42:06 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jan 28 13:42:06 2012] rmf not generated due to insufficient counts
[Sat Jan 28 13:51:50 2012] Updating aperture counts using extracted products
[Sat Jan 28 13:51:50 2012] Error reading totcts from fullrun_mos2_xmm0112570101_pi300-10000_pass1_cl_src60_src_b10.pi.gz
[Sat Jan 28 13:51:52 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jan 28 13:51:52 2012] Using photon index=1.80, rate=0.0024, arf fullrun_mos2_xmm0112570101_pi300-10000_pass1_cl_src60.arf
[Sat Jan 28 13:51:52 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jan 28 13:51:52 2012] Updating source flux to 7.1e-14
[Sat Jan 28 13:59:05 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting