[Wed Jan 25 01:03:55 2012] Detection parameters:
  Position = (382.6, 263.9) = 0 42 18.04 41 12 19.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 487.9 +/- 38.3
  Background counts = 36.8
  Rate = 0.01 +/- 0.001

[Wed Jan 25 01:03:56 2012] Off-axis axis estimate = 6.59'
[Wed Jan 25 16:12:56 2012] Using EEF radius (= 9.72 ")to estimate initial spatial extent for simple fitting
[Wed Jan 25 16:12:56 2012] Initial guess for spatial extent in simple fitting = 9.72"
[Wed Jan 25 16:12:56 2012] source mask rpix=2.2, npix_max = 29, mask sum = 20, frac = 0.668
[Wed Jan 25 16:12:56 2012] Giving source the simple spatial ID 53 for pass 0, mean size = 9.72"
[Wed Jan 25 22:37:53 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_src53.ximg exists
[Wed Jan 25 22:37:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_src53.csv
[Wed Jan 25 22:37:53 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_src53_1.ximg exists
[Wed Jan 25 22:37:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_src53.csv
[Wed Jan 25 22:37:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_src53_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan 25 22:37:54 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src53.ximg exists
[Wed Jan 25 22:37:54 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src53_1.ximg exists
[Wed Jan 25 22:37:54 2012] Fit fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src53 appears to have run properly
[Wed Jan 25 22:38:54 2012] Source 58 is offset by -7.310651 and 5.819836 pixels which is larger than
2 X fitted extent = 1.109177 x 1.109177, not incorporating fit results
[Wed Jan 25 22:38:54 2012] Warning, spatial fit 53 centroid is now closest to src. 29
[Wed Jan 25 22:38:54 2012] Vigneting correction estimate = 1.000000
[Wed Jan 25 22:38:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 25 22:38:54 2012] Assessing source extent using major
[Wed Jan 25 22:38:54 2012] Source does appear to be extended
[Wed Jan 25 22:38:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 25 22:38:54 2012] Source is confused with source 57
[Thu Jan 26 18:45:16 2012] Using EEF radius (= 9.72 ")to estimate initial spatial extent for simple fitting
[Thu Jan 26 18:45:16 2012] Initial guess for spatial extent in simple fitting = 9.72"
[Thu Jan 26 18:45:16 2012] source mask rpix=2.2, npix_max = 29, mask sum = 20, frac = 0.668
[Thu Jan 26 18:45:16 2012] Giving source the simple spatial ID 53 for pass 1, mean size = 9.72"
[Fri Jan 27 00:06:07 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_src53.ximg exists
[Fri Jan 27 00:06:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_src53.csv
[Fri Jan 27 00:06:07 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_src53_1.ximg exists
[Fri Jan 27 00:06:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_src53.csv
[Fri Jan 27 00:06:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_src53_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jan 27 00:06:08 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src53.ximg exists
[Fri Jan 27 00:06:08 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src53_1.ximg exists
[Fri Jan 27 00:06:08 2012] Fit fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src53 appears to have run properly
[Fri Jan 27 00:07:06 2012] Warning, spatial fit 53 centroid is now closest to src. 29
[Fri Jan 27 00:07:06 2012] Vigneting correction estimate = 1.000000
[Fri Jan 27 00:07:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan 27 00:07:06 2012] Assessing source extent using major
[Fri Jan 27 00:07:06 2012] Source does appear to be extended
[Fri Jan 27 00:07:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jan 28 08:48:10 2012] XMMSAS src. selection expression = ellipse(33234.461395, 22914.837769, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jan 28 08:48:10 2012] Writing source region out to fullrun_mos2_xmm0112570101_pi300-10000_pass1_cl_src58_src.reg
[Sat Jan 28 08:48:10 2012] Extracting stamp from image fullrun_mos2_xmm0112570101_pi300-10000_cl_sm2.00.img.gz, (345, 226) - (420, 301)
[Sat Jan 28 08:48:10 2012] XMMSAS bgd. selection expression = annulus(33234.461395, 22914.837769, 1087.500000, 2175.000000, X, Y) && !ellipse(30925.947900, 23046.840000, 407.055212, 407.055212, 0.000000, X, Y) && !ellipse(33135.550000, 25046.398000, 534.864815, 283.299208, 0.000000, X, Y) && !ellipse(33814.598000, 23294.978000, 448.556813, 448.556813, 0.000000, X, Y) && !ellipse(31923.191600, 24459.388000, 1231.008035, 1231.008035, 0.000000, X, Y) && !ellipse(31634.827820, 24594.844600, 288.560808, 288.560808, 0.000000, X, Y) && !ellipse(33161.473400, 23055.158600, 557.734416, 557.734416, 0.000000, X, Y) && !ellipse(32454.458923, 25354.820312, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34656.777160, 21188.832400, 402.584812, 402.584812, 0.000000, X, Y) && !ellipse(32098.148682, 25110.716919, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34312.156000, 23461.389200, 1645.960047, 1645.960047, 0.000000, X, Y) && !ellipse(35612.520691, 20761.456345, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jan 28 08:48:10 2012] Writing fullrun_mos2_xmm0112570101_pi300-10000_pass1_cl_src58.gif
[Sat Jan 28 09:30:40 2012] Mean detx,y = (-6706.37, -1743.21) 
[Sat Jan 28 09:30:41 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jan 28 09:31:03 2012] Binned source spectrum to 10 counts/bin
[Sat Jan 28 09:31:03 2012] Setting source spectrum file to fullrun_mos2_xmm0112570101_pi300-10000_pass1_cl_src58_src_b10.pi.gz
[Sat Jan 28 09:31:03 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112570101_pi300-10000_pass1_cl_src58_bgd.pi.gz
[Sat Jan 28 12:43:24 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jan 28 12:43:24 2012] rmf not generated due to insufficient counts
[Sat Jan 28 13:51:49 2012] Updating aperture counts using extracted products
[Sat Jan 28 13:51:49 2012] Error reading totcts from fullrun_mos2_xmm0112570101_pi300-10000_pass1_cl_src58_src_b10.pi.gz
[Sat Jan 28 13:51:51 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jan 28 13:51:51 2012] Using photon index=1.80, rate=0.0122, arf fullrun_mos2_xmm0112570101_pi300-10000_pass1_cl_src58.arf
[Sat Jan 28 13:51:51 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jan 28 13:51:51 2012] Updating source flux to 5.2e-12
[Sat Jan 28 13:59:05 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting