[Wed Jan 25 01:03:54 2012] Detection parameters:
  Position = (323.9, 319.0) = 0 42 40.66 41 16 16.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 842.0 +/- 50.9
  Background counts = 105.7
  Rate = 0.01 +/- 0.0009

[Wed Jan 25 01:03:56 2012] Off-axis axis estimate = 2.37'
[Wed Jan 25 16:12:56 2012] Using EEF radius (= 7.61 ")to estimate initial spatial extent for simple fitting
[Wed Jan 25 16:12:56 2012] Initial guess for spatial extent in simple fitting = 7.61"
[Wed Jan 25 16:12:56 2012] source mask rpix=1.8, npix_max = 20, mask sum = 15, frac = 0.740
[Wed Jan 25 16:12:56 2012] Giving source the simple spatial ID 45 for pass 0, mean size = 7.61"
[Wed Jan 25 22:37:53 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_src45.ximg exists
[Wed Jan 25 22:37:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_src45.csv
[Wed Jan 25 22:37:53 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_src45_1.ximg exists
[Wed Jan 25 22:37:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_src45.csv
[Wed Jan 25 22:37:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_src45_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan 25 22:37:54 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src45.ximg exists
[Wed Jan 25 22:37:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src45.csv
[Wed Jan 25 22:37:54 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src45_1.ximg exists
[Wed Jan 25 22:37:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src45.csv
[Wed Jan 25 22:37:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src45_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan 25 22:38:54 2012] Warning, spatial fit 45 centroid is now closest to src. 2
[Wed Jan 25 22:38:54 2012] Vigneting correction estimate = 1.000000
[Wed Jan 25 22:38:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 25 22:38:54 2012] Assessing source extent using major
[Wed Jan 25 22:38:54 2012] Source does appear to be extended
[Wed Jan 25 22:38:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 25 22:38:54 2012] Source is confused with source 2
[Thu Jan 26 18:45:16 2012] Using EEF radius (= 7.61 ")to estimate initial spatial extent for simple fitting
[Thu Jan 26 18:45:16 2012] Initial guess for spatial extent in simple fitting = 7.61"
[Thu Jan 26 18:45:16 2012] source mask rpix=1.8, npix_max = 20, mask sum = 15, frac = 0.740
[Thu Jan 26 18:45:16 2012] Giving source the simple spatial ID 45 for pass 1, mean size = 7.61"
[Fri Jan 27 00:06:07 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_src45.ximg exists
[Fri Jan 27 00:06:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_src45.csv
[Fri Jan 27 00:06:07 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_src45_1.ximg exists
[Fri Jan 27 00:06:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_src45.csv
[Fri Jan 27 00:06:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_src45_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jan 27 00:06:08 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src45.ximg exists
[Fri Jan 27 00:06:08 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src45_1.ximg exists
[Fri Jan 27 00:06:08 2012] Fit fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src45 appears to have run properly
[Fri Jan 27 00:07:06 2012] Source 51 is offset by -5.764726 and 2.716848 pixels which is larger than
2 X fitted extent = 2.251352 x 2.251352, not incorporating fit results
[Fri Jan 27 00:07:06 2012] Vigneting correction estimate = 1.000000
[Fri Jan 27 00:07:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan 27 00:07:06 2012] Assessing source extent using major
[Fri Jan 27 00:07:06 2012] Source does appear to be extended
[Fri Jan 27 00:07:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jan 28 08:48:10 2012] XMMSAS src. selection expression = ellipse(28128.056824, 27705.301819, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jan 28 08:48:10 2012] Writing source region out to fullrun_mos2_xmm0112570101_pi300-10000_pass1_cl_src51_src.reg
[Sat Jan 28 08:48:10 2012] Extracting stamp from image fullrun_mos2_xmm0112570101_pi300-10000_cl_sm2.00.img.gz, (286, 282) - (361, 357)
[Sat Jan 28 08:48:10 2012] XMMSAS bgd. selection expression = annulus(28128.056824, 27705.301819, 1087.500000, 2175.000000, X, Y) && !ellipse(28623.103600, 27453.785600, 1088.311231, 1088.311231, 0.000000, X, Y) && !ellipse(26682.092000, 27907.668000, 446.745613, 446.745613, 0.000000, X, Y) && !ellipse(26383.662600, 26636.591600, 486.007214, 486.007214, 0.000000, X, Y) && !ellipse(30286.645638, 27814.385848, 418.897106, 370.675634, 38.739179, X, Y) && !ellipse(27656.610000, 27227.454000, 1127.632032, 1127.632032, 358.957000, X, Y) && !ellipse(27696.151000, 27196.964600, 614.860018, 614.860018, 0.000000, X, Y) && !ellipse(28386.055880, 25546.927800, 410.037612, 321.473609, 49.478200, X, Y) && !ellipse(27141.402802, 26755.239410, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29667.652557, 27786.447479, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27619.037262, 26001.301361, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28242.069092, 30678.236359, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27139.232145, 29133.944746, 1215.313826, 403.760462, 98.657810, X, Y) && !ellipse(26200.593400, 30102.024600, 288.051208, 288.051208, 0.000000, X, Y) && !ellipse(26173.466736, 28755.246429, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26179.427200, 29416.956800, 473.640814, 473.640814, 0.000000, X, Y) && !ellipse(25504.415283, 29349.532257, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25160.538544, 28832.874176, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29956.081665, 26761.484039, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29902.070404, 26320.762451, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27498.902496, 24746.831879, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29135.337769, 24927.963287, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29440.525421, 25795.664032, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jan 28 08:48:10 2012] Writing fullrun_mos2_xmm0112570101_pi300-10000_pass1_cl_src51.gif
[Sat Jan 28 09:28:32 2012] Mean detx,y = (-584.24, 742.13) 
[Sat Jan 28 09:28:33 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jan 28 09:28:42 2012] Binned source spectrum to 10 counts/bin
[Sat Jan 28 09:28:42 2012] Setting source spectrum file to fullrun_mos2_xmm0112570101_pi300-10000_pass1_cl_src51_src_b10.pi.gz
[Sat Jan 28 09:28:42 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112570101_pi300-10000_pass1_cl_src51_bgd.pi.gz
[Sat Jan 28 12:32:45 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jan 28 12:32:45 2012] rmf not generated due to insufficient counts
[Sat Jan 28 13:51:49 2012] Updating aperture counts using extracted products
[Sat Jan 28 13:51:49 2012] Error reading totcts from fullrun_mos2_xmm0112570101_pi300-10000_pass1_cl_src51_src_b10.pi.gz
[Sat Jan 28 13:51:51 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jan 28 13:51:51 2012] Using photon index=1.80, rate=0.0146, arf fullrun_mos2_xmm0112570101_pi300-10000_pass1_cl_src51.arf
[Sat Jan 28 13:51:51 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jan 28 13:51:51 2012] Updating source flux to 1.4e-13
[Sat Jan 28 13:59:05 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting