[Wed Jan 25 01:03:54 2012] Detection parameters: Position = (312.4, 334.0) = 0 42 45.07 41 17 21.1 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 758.1 +/- 38.5 Background counts = 93.4 Rate = 0.01 +/- 0.0007 [Wed Jan 25 01:03:56 2012] Off-axis axis estimate = 2.77' [Wed Jan 25 16:12:56 2012] Using EEF radius (= 7.81 ")to estimate initial spatial extent for simple fitting [Wed Jan 25 16:12:56 2012] Initial guess for spatial extent in simple fitting = 7.81" [Wed Jan 25 16:12:56 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.948 [Wed Jan 25 16:12:56 2012] Giving source the simple spatial ID 49 for pass 0, mean size = 7.81" [Wed Jan 25 22:37:53 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_src49.ximg exists [Wed Jan 25 22:37:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_src49.csv [Wed Jan 25 22:37:53 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_src49_1.ximg exists [Wed Jan 25 22:37:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_src49.csv [Wed Jan 25 22:37:53 2012] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_src49_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Jan 25 22:37:54 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src49.ximg exists [Wed Jan 25 22:37:54 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src49_1.ximg exists [Wed Jan 25 22:37:54 2012] Fit fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src49 appears to have run properly [Wed Jan 25 22:38:54 2012] Source 50 is offset by -0.530753 and -4.102556 pixels which is larger than 2 X fitted extent = 1.558018 x 1.558018, not incorporating fit results [Wed Jan 25 22:38:54 2012] Vigneting correction estimate = 1.000000 [Wed Jan 25 22:38:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Jan 25 22:38:54 2012] Assessing source extent using major [Wed Jan 25 22:38:54 2012] Source does appear to be extended [Wed Jan 25 22:38:54 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Thu Jan 26 18:45:16 2012] Using EEF radius (= 7.81 ")to estimate initial spatial extent for simple fitting [Thu Jan 26 18:45:16 2012] Initial guess for spatial extent in simple fitting = 7.81" [Thu Jan 26 18:45:16 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.948 [Thu Jan 26 18:45:16 2012] Giving source the simple spatial ID 49 for pass 1, mean size = 7.81" [Fri Jan 27 00:06:07 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_src49.ximg exists [Fri Jan 27 00:06:07 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_src49_1.ximg exists [Fri Jan 27 00:06:07 2012] Fit fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_src49 appears to have run properly [Fri Jan 27 00:06:08 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src49.ximg exists [Fri Jan 27 00:06:08 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src49_1.ximg exists [Fri Jan 27 00:06:08 2012] Fit fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src49 appears to have run properly [Fri Jan 27 00:07:06 2012] Spatial fit model total counts = 3864.550000, observed total counts = 3862.000000 [Fri Jan 27 00:07:06 2012] Offset between fit and detection position for source 50 = 1.402366 pixels [Fri Jan 27 00:07:06 2012] 3757.331000 total counts/ 3158.690000 bgd. counts: snr = 10.651554 Spatial fit parameters: Offset between fit and detection position for source 50 = 1.402366 pixels Position = (312.5, 335.4) = 0 42 45.04 41 17 26.6 Extent = 15.2" x 5.0", rotation angle = 99 Source counts = 598.6 +/- 61.3 Background counts = 3158.7 Rate = 0.009 +/- 0.001 [Fri Jan 27 00:07:06 2012] Vigneting correction estimate = 1.000000 [Fri Jan 27 00:07:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Fri Jan 27 00:07:06 2012] Assessing source extent using major [Fri Jan 27 00:07:06 2012] Source does appear to be extended [Fri Jan 27 00:07:06 2012] Computing asymmetry using major and minor axis, asym = 3.01 [Fri Jan 27 00:07:06 2012] Source is asymmetric [Sat Jan 28 08:48:10 2012] XMMSAS src. selection expression = ellipse(27139.232145, 29133.944746, 911.485370, 302.820346, 98.657810, X, Y) [Sat Jan 28 08:48:10 2012] Writing source region out to fullrun_mos2_xmm0112570101_pi300-10000_pass1_cl_src50_src.reg [Sat Jan 28 08:48:10 2012] Extracting stamp from image fullrun_mos2_xmm0112570101_pi300-10000_cl_sm2.00.img.gz, (260, 283) - (365, 388) [Sat Jan 28 08:48:10 2012] XMMSAS bgd. selection expression = annulus(27139.232145, 29133.944746, 1519.142283, 3038.284566, X, Y) && !ellipse(28623.103600, 27453.785600, 1088.311231, 1088.311231, 0.000000, X, Y) && !ellipse(26682.092000, 27907.668000, 446.745613, 446.745613, 0.000000, X, Y) && !ellipse(26383.662600, 26636.591600, 486.007214, 486.007214, 0.000000, X, Y) && !ellipse(24913.193248, 27456.407994, 325.671986, 325.239337, 88.752114, X, Y) && !ellipse(30286.645638, 27814.385848, 418.897106, 370.675634, 38.739179, X, Y) && !ellipse(25465.169800, 26983.381600, 300.711209, 300.711209, 0.000000, X, Y) && !ellipse(25465.088600, 30879.632800, 406.448812, 346.452010, 4.084000, X, Y) && !ellipse(27656.610000, 27227.454000, 1127.632032, 1127.632032, 358.957000, X, Y) && !ellipse(23803.056420, 27511.280480, 369.652811, 369.652811, 0.000000, X, Y) && !ellipse(23861.171420, 31377.450000, 407.056012, 407.056012, 0.000000, X, Y) && !ellipse(27696.151000, 27196.964600, 614.860018, 614.860018, 0.000000, X, Y) && !ellipse(30263.511200, 31760.018400, 356.492010, 356.492010, 0.000000, X, Y) && !ellipse(27141.402802, 26755.239410, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28128.056824, 27705.301819, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29667.652557, 27786.447479, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27619.037262, 26001.301361, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28242.069092, 30678.236359, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24807.110000, 30508.554400, 310.551209, 225.767206, -0.000000, X, Y) && !ellipse(26200.593400, 30102.024600, 288.051208, 288.051208, 0.000000, X, Y) && !ellipse(24176.446625, 26773.208649, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29371.943359, 32275.138245, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26173.466736, 28755.246429, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26179.427200, 29416.956800, 473.640814, 473.640814, 0.000000, X, Y) && !ellipse(25504.415283, 29349.532257, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25160.538544, 28832.874176, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29956.081665, 26761.484039, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29902.070404, 26320.762451, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29440.525421, 25795.664032, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24516.532000, 26255.578000, 1157.840033, 1157.840033, 0.000000, X, Y) [Sat Jan 28 08:48:10 2012] Writing fullrun_mos2_xmm0112570101_pi300-10000_pass1_cl_src50.gif [Sat Jan 28 09:29:36 2012] Mean detx,y = (1110.06, 1682.43) [Sat Jan 28 09:29:37 2012] Setting backscal keywords in source and bgd. spectrum [Sat Jan 28 09:29:46 2012] Binned source spectrum to 10 counts/bin [Sat Jan 28 09:29:46 2012] Setting source spectrum file to fullrun_mos2_xmm0112570101_pi300-10000_pass1_cl_src50_src_b10.pi.gz [Sat Jan 28 09:29:46 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112570101_pi300-10000_pass1_cl_src50_bgd.pi.gz [Sat Jan 28 13:51:49 2012] Updating aperture counts using extracted products [Sat Jan 28 13:51:49 2012] Error reading totcts from fullrun_mos2_xmm0112570101_pi300-10000_pass1_cl_src50_src_b10.pi.gz [Sat Jan 28 13:51:51 2012] Calculating source flux in energy range 0.30-8.00 [Sat Jan 28 13:51:51 2012] Using photon index=1.80, rate=0.00942, arf fullrun_mos2_xmm0112570101_pi300-10000_pass1_cl_src50.arf [Sat Jan 28 13:51:51 2012] Assuming count rate is from the 0.30-10.00 bandpass [Sat Jan 28 13:51:51 2012] Updating source flux to 1.3e-13 [Sat Jan 28 13:59:05 2012] Flag b found in src. 50 procflags, skipping spectral fitting