[Wed Jan 25 01:03:54 2012] Detection parameters:
  Position = (225.0, 374.3) = 0 43 18.82 41 20 17.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 667.8 +/- 32.7
  Background counts = 31.7
  Rate = 0.02 +/- 0.001

[Wed Jan 25 01:03:56 2012] Off-axis axis estimate = 7.65'
[Wed Jan 25 16:12:56 2012] Using EEF radius (= 10.25 ")to estimate initial spatial extent for simple fitting
[Wed Jan 25 16:12:56 2012] Initial guess for spatial extent in simple fitting = 10.25"
[Wed Jan 25 16:12:56 2012] source mask rpix=2.4, npix_max = 32, mask sum = 36, frac = 1.102
[Wed Jan 25 16:12:56 2012] Giving source the simple spatial ID 37 for pass 0, mean size = 10.25"
[Wed Jan 25 22:37:52 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_src37.ximg exists
[Wed Jan 25 22:37:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_src37.csv
[Wed Jan 25 22:37:52 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_src37_1.ximg exists
[Wed Jan 25 22:37:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_src37.csv
[Wed Jan 25 22:37:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan 25 22:37:54 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src37.ximg exists
[Wed Jan 25 22:37:54 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src37_1.ximg exists
[Wed Jan 25 22:37:54 2012] Fit fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src37 appears to have run properly
[Wed Jan 25 22:38:54 2012] Warning: source 37 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 40 at 13.838801 pixels away
[Wed Jan 25 22:38:54 2012] Vigneting correction estimate = 1.000000
[Wed Jan 25 22:38:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 25 22:38:54 2012] Assessing source extent using major
[Wed Jan 25 22:38:54 2012] Source does appear to be extended
[Wed Jan 25 22:38:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan 26 18:45:16 2012] Using EEF radius (= 10.25 ")to estimate initial spatial extent for simple fitting
[Thu Jan 26 18:45:16 2012] Initial guess for spatial extent in simple fitting = 10.25"
[Thu Jan 26 18:45:16 2012] source mask rpix=2.4, npix_max = 32, mask sum = 36, frac = 1.102
[Thu Jan 26 18:45:16 2012] Giving source the simple spatial ID 37 for pass 1, mean size = 10.25"
[Fri Jan 27 00:06:07 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_src37.ximg exists
[Fri Jan 27 00:06:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_src37.csv
[Fri Jan 27 00:06:07 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_src37_1.ximg exists
[Fri Jan 27 00:06:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_src37.csv
[Fri Jan 27 00:06:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jan 27 00:06:08 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src37.ximg exists
[Fri Jan 27 00:06:08 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src37_1.ximg exists
[Fri Jan 27 00:06:08 2012] Fit fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src37 appears to have run properly
[Fri Jan 27 00:07:06 2012] Spatial fit model total counts = 936.969000, observed total counts = 936.000000
[Fri Jan 27 00:07:06 2012] Offset between fit and detection position for source 40 = 0.167220 pixels
[Fri Jan 27 00:07:06 2012] 942.288000 total counts/ 493.883000 bgd. counts: snr = 20.177084
Spatial fit parameters:
  Offset between fit and detection position for source 40 = 0.167220 pixels
  Position = (224.9, 374.4) = 0 43 18.87 41 20 15.9
  Extent = 5.4 (4.9-5.9)", rotation angle = 0
  Source counts = 448.4 +/- 30.7
  Background counts = 493.9
  Rate = 0.007 +/- 0.0005
[Fri Jan 27 00:07:06 2012] Vigneting correction estimate = 1.000000
[Fri Jan 27 00:07:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan 27 00:07:06 2012] Assessing source extent using major axis lower bound
[Fri Jan 27 00:07:06 2012] Source does appear to be extended
[Fri Jan 27 00:07:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jan 28 08:48:09 2012] XMMSAS src. selection expression = ellipse(19518.729780, 32524.066000, 324.188409, 324.188409, 0.000000, X, Y)
[Sat Jan 28 08:48:09 2012] Writing source region out to fullrun_mos2_xmm0112570101_pi300-10000_pass1_cl_src40_src.reg
[Sat Jan 28 08:48:09 2012] Extracting stamp from image fullrun_mos2_xmm0112570101_pi300-10000_cl_sm2.00.img.gz, (206, 356) - (244, 393)
[Sat Jan 28 08:48:09 2012] XMMSAS bgd. selection expression = annulus(19518.729780, 32524.066000, 540.314016, 1080.628031, X, Y)
[Sat Jan 28 08:48:09 2012] Writing fullrun_mos2_xmm0112570101_pi300-10000_pass1_cl_src40.gif
[Sat Jan 28 09:25:16 2012] Mean detx,y = (9492.66, 2326.47) 
[Sat Jan 28 09:25:17 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jan 28 09:25:24 2012] Binned source spectrum to 10 counts/bin
[Sat Jan 28 09:25:25 2012] Setting source spectrum file to fullrun_mos2_xmm0112570101_pi300-10000_pass1_cl_src40_src_b10.pi.gz
[Sat Jan 28 09:25:25 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112570101_pi300-10000_pass1_cl_src40_bgd.pi.gz
[Sat Jan 28 13:51:48 2012] Updating aperture counts using extracted products
[Sat Jan 28 13:51:48 2012] Error reading totcts from fullrun_mos2_xmm0112570101_pi300-10000_pass1_cl_src40_src_b10.pi.gz
[Sat Jan 28 13:51:51 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jan 28 13:51:51 2012] Using photon index=1.80, rate=0.00705, arf fullrun_mos2_xmm0112570101_pi300-10000_pass1_cl_src40.arf
[Sat Jan 28 13:51:51 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jan 28 13:51:51 2012] Updating source flux to 1.6e-13