[Wed Jan 25 01:03:53 2012] Detection parameters: Position = (287.1, 316.1) = 0 42 54.83 41 16 3.2 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 6028.7 +/- 96.0 Background counts = 94.8 Rate = 0.1 +/- 0.002 [Wed Jan 25 01:03:56 2012] Off-axis axis estimate = 1.52' [Wed Jan 25 16:12:56 2012] Using EEF radius (= 7.19 ")to estimate initial spatial extent for simple fitting [Wed Jan 25 16:12:56 2012] Initial guess for spatial extent in simple fitting = 7.19" [Wed Jan 25 16:12:56 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.863 [Wed Jan 25 16:12:56 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 7.19" [Wed Jan 25 22:37:52 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_src7.ximg exists [Wed Jan 25 22:37:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_src7.csv [Wed Jan 25 22:37:52 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_src7_1.ximg exists [Wed Jan 25 22:37:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_src7.csv [Wed Jan 25 22:37:52 2012] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_src7_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Jan 25 22:37:54 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src7.ximg exists [Wed Jan 25 22:37:54 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists [Wed Jan 25 22:37:54 2012] Fit fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly [Wed Jan 25 22:38:54 2012] Spatial fit model total counts = 10289.800000, observed total counts = 10281.000000 [Wed Jan 25 22:38:54 2012] Offset between fit and detection position for source 4 = 0.204463 pixels [Wed Jan 25 22:38:54 2012] 10195.070000 total counts/ 7036.620000 bgd. counts: snr = 37.652339 Spatial fit parameters: Offset between fit and detection position for source 4 = 0.204463 pixels Position = (286.9, 316.1) = 0 42 54.91 41 16 2.7 Extent = 4.0 (3.9-4.1)", rotation angle = 0 Source counts = 3158.4 +/- 101.0 Background counts = 7036.6 Rate = 0.05 +/- 0.002 [Wed Jan 25 22:38:54 2012] Spatial fit model total counts = 11778.200000, observed total counts = 11769.000000 [Wed Jan 25 22:38:54 2012] Offset between fit and detection position for source 4 = 0.054446 pixels [Wed Jan 25 22:38:54 2012] Warning, changing simple spatial fit ID from 7 to 10 [Wed Jan 25 22:38:54 2012] 12029.930000 total counts/ 8960.110000 bgd. counts: snr = 32.430694 Spatial fit parameters: Offset between fit and detection position for source 4 = 0.054446 pixels Position = (287.0, 316.1) = 0 42 54.89 41 16 2.5 Extent = 4.0 (3.8-4.1)" x 3.8 (3.8-3.8)", rotation angle = 90 (89-90) degrees Source counts = 3069.8 +/- 109.7 Background counts = 8960.1 Rate = 0.05 +/- 0.002 [Wed Jan 25 22:38:54 2012] Vigneting correction estimate = 1.000000 [Wed Jan 25 22:38:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Jan 25 22:38:54 2012] Assessing source extent using major axis lower bound [Wed Jan 25 22:38:54 2012] Source does appear to be extended [Wed Jan 25 22:38:54 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.00 [Thu Jan 26 18:45:16 2012] Using previous fit value to estimate initial spatial extent for simple fitting [Thu Jan 26 18:45:16 2012] Initial guess for spatial extent in simple fitting = 3.89" [Thu Jan 26 18:45:16 2012] source mask rpix=0.9, npix_max = 7, mask sum = 4, frac = 0.515 [Thu Jan 26 18:45:16 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 3.89" [Fri Jan 27 00:06:06 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_src7.ximg exists [Fri Jan 27 00:06:06 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_src7_1.ximg exists [Fri Jan 27 00:06:06 2012] Fit fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_src7 appears to have run properly [Fri Jan 27 00:06:08 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src7.ximg exists [Fri Jan 27 00:06:08 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists [Fri Jan 27 00:06:08 2012] Fit fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly [Fri Jan 27 00:07:06 2012] Spatial fit model total counts = 10344.800000, observed total counts = 10281.000000 [Fri Jan 27 00:07:06 2012] Offset between fit and detection position for source 4 = 0.075021 pixels [Fri Jan 27 00:07:06 2012] 9920.240000 total counts/ 6721.210000 bgd. counts: snr = 39.020657 Spatial fit parameters: Offset between fit and detection position for source 4 = 0.075021 pixels Position = (286.9, 316.1) = 0 42 54.91 41 16 2.7 Extent = 4.1" x 4.1", rotation angle = 89 Source counts = 3199.0 +/- 99.6 Background counts = 6721.2 Rate = 0.05 +/- 0.002 [Fri Jan 27 00:07:06 2012] Vigneting correction estimate = 1.000000 [Fri Jan 27 00:07:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Fri Jan 27 00:07:06 2012] Assessing source extent using major [Fri Jan 27 00:07:06 2012] Source does appear to be extended [Fri Jan 27 00:07:06 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Jan 28 08:48:07 2012] Counts = 3199.030000, rescaling region sizes by 2.000000 [Sat Jan 28 08:48:07 2012] XMMSAS src. selection expression = ellipse(24913.193248, 27456.407994, 488.507978, 487.859006, 88.752114, X, Y) [Sat Jan 28 08:48:07 2012] Writing source region out to fullrun_mos2_xmm0112570101_pi300-10000_pass1_cl_src4_src.reg [Sat Jan 28 08:48:07 2012] Extracting stamp from image fullrun_mos2_xmm0112570101_pi300-10000_cl_sm2.00.img.gz, (259, 288) - (315, 344) [Sat Jan 28 08:48:07 2012] XMMSAS bgd. selection expression = annulus(24913.193248, 27456.407994, 1628.359928, 3256.719855, X, Y) && !ellipse(28623.103600, 27453.785600, 1088.311231, 1088.311231, 0.000000, X, Y) && !ellipse(26682.092000, 27907.668000, 446.745613, 446.745613, 0.000000, X, Y) && !ellipse(26383.662600, 26636.591600, 486.007214, 486.007214, 0.000000, X, Y) && !ellipse(23085.579800, 26681.375115, 464.166433, 379.313825, 56.352591, X, Y) && !ellipse(21382.145000, 26018.770200, 427.772812, 381.827211, 77.146808, X, Y) && !ellipse(25465.169800, 26983.381600, 300.711209, 300.711209, 0.000000, X, Y) && !ellipse(22317.730000, 28107.784000, 1258.200036, 1258.200036, 0.000000, X, Y) && !ellipse(25465.088600, 30879.632800, 406.448812, 346.452010, 4.084000, X, Y) && !ellipse(27656.610000, 27227.454000, 1127.632032, 1127.632032, 358.957000, X, Y) && !ellipse(23803.056420, 27511.280480, 369.652811, 369.652811, 0.000000, X, Y) && !ellipse(27696.151000, 27196.964600, 614.860018, 614.860018, 0.000000, X, Y) && !ellipse(21563.774338, 31004.799652, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22908.121400, 29894.904800, 345.339210, 345.339210, 0.000000, X, Y) && !ellipse(22166.213600, 29993.054400, 333.871210, 333.871210, 0.000000, X, Y) && !ellipse(28386.055880, 25546.927800, 410.037612, 321.473609, 49.478200, X, Y) && !ellipse(27141.402802, 26755.239410, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28128.056824, 27705.301819, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27619.037262, 26001.301361, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28242.069092, 30678.236359, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27139.232145, 29133.944746, 1215.313826, 403.760462, 98.657810, X, Y) && !ellipse(24807.110000, 30508.554400, 310.551209, 225.767206, -0.000000, X, Y) && !ellipse(26200.593400, 30102.024600, 288.051208, 288.051208, 0.000000, X, Y) && !ellipse(22819.883301, 27425.772369, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24176.446625, 26773.208649, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28128.983040, 24326.131600, 337.733610, 337.733610, 0.000000, X, Y) && !ellipse(27502.343414, 24160.811157, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26173.466736, 28755.246429, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21240.762146, 29990.647491, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26179.427200, 29416.956800, 473.640814, 473.640814, 0.000000, X, Y) && !ellipse(25504.415283, 29349.532257, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25160.538544, 28832.874176, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23908.256805, 23404.409241, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27498.902496, 24746.831879, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24516.532000, 26255.578000, 1157.840033, 1157.840033, 0.000000, X, Y) [Sat Jan 28 08:48:07 2012] Writing fullrun_mos2_xmm0112570101_pi300-10000_pass1_cl_src4.gif [Sat Jan 28 08:52:51 2012] Mean detx,y = (2650.30, -538.35) [Sat Jan 28 08:52:52 2012] Setting backscal keywords in source and bgd. spectrum [Sat Jan 28 08:53:02 2012] Binned source spectrum to 10 counts/bin [Sat Jan 28 08:53:02 2012] Setting source spectrum file to fullrun_mos2_xmm0112570101_pi300-10000_pass1_cl_src4_src_b10.pi.gz [Sat Jan 28 08:53:02 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112570101_pi300-10000_pass1_cl_src4_bgd.pi.gz [Sat Jan 28 13:51:47 2012] Updating aperture counts using extracted products [Sat Jan 28 13:51:47 2012] Error reading totcts from fullrun_mos2_xmm0112570101_pi300-10000_pass1_cl_src4_src_b10.pi.gz [Sat Jan 28 13:51:50 2012] Calculating source flux in energy range 0.30-8.00 [Sat Jan 28 13:51:50 2012] Using photon index=1.80, rate=0.0503, arf fullrun_mos2_xmm0112570101_pi300-10000_pass1_cl_src4.arf [Sat Jan 28 13:51:50 2012] Assuming count rate is from the 0.30-10.00 bandpass [Sat Jan 28 13:51:50 2012] Updating source flux to 5.2e-13