[Wed Jan 25 01:03:54 2012] Detection parameters:
  Position = (236.3, 196.1) = 0 43 14.38 41 7 20.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1610.5 +/- 48.4
  Background counts = 19.5
  Rate = 0.05 +/- 0.001

[Wed Jan 25 01:03:56 2012] Off-axis axis estimate = 8.68'
[Wed Jan 25 16:12:56 2012] Using EEF radius (= 10.77 ")to estimate initial spatial extent for simple fitting
[Wed Jan 25 16:12:56 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jan 25 16:12:56 2012] Initial guess for spatial extent in simple fitting = 10.77"
[Wed Jan 25 16:12:56 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.016
[Wed Jan 25 16:12:56 2012] Giving source the simple spatial ID 22 for pass 0, mean size = 10.77"
[Wed Jan 25 22:37:52 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_src22.ximg exists
[Wed Jan 25 22:37:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_src22.csv
[Wed Jan 25 22:37:52 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_src22_1.ximg exists
[Wed Jan 25 22:37:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_src22.csv
[Wed Jan 25 22:37:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan 25 22:37:54 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src22.ximg exists
[Wed Jan 25 22:37:54 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src22_1.ximg exists
[Wed Jan 25 22:37:54 2012] Fit fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src22 appears to have run properly
[Wed Jan 25 22:38:54 2012] Warning, spatial fit 22 centroid is now closest to src. 137
[Wed Jan 25 22:38:54 2012] Vigneting correction estimate = 1.000000
[Wed Jan 25 22:38:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 25 22:38:54 2012] Assessing source extent using major
[Wed Jan 25 22:38:54 2012] Source does appear to be extended
[Wed Jan 25 22:38:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan 26 18:45:16 2012] Using EEF radius (= 10.77 ")to estimate initial spatial extent for simple fitting
[Thu Jan 26 18:45:16 2012] Initial guess for spatial extent in simple fitting = 10.77"
[Thu Jan 26 18:45:16 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.016
[Thu Jan 26 18:45:16 2012] Giving source the simple spatial ID 22 for pass 1, mean size = 10.77"
[Fri Jan 27 00:06:07 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_src22.ximg exists
[Fri Jan 27 00:06:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_src22.csv
[Fri Jan 27 00:06:07 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_src22_1.ximg exists
[Fri Jan 27 00:06:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_src22.csv
[Fri Jan 27 00:06:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jan 27 00:06:08 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src22.ximg exists
[Fri Jan 27 00:06:08 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src22_1.ximg exists
[Fri Jan 27 00:06:08 2012] Fit fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src22 appears to have run properly
[Fri Jan 27 00:07:06 2012] Warning: source 22 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 35 at 14.461687 pixels away
[Fri Jan 27 00:07:06 2012] Vigneting correction estimate = 1.000000
[Fri Jan 27 00:07:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan 27 00:07:06 2012] Assessing source extent using major
[Fri Jan 27 00:07:06 2012] Source does appear to be extended
[Fri Jan 27 00:07:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jan 28 08:48:09 2012] Counts = 1610.528809, rescaling region sizes by 2.000000
[Sat Jan 28 08:48:09 2012] XMMSAS src. selection expression = ellipse(20512.011032, 17009.128662, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sat Jan 28 08:48:09 2012] Writing source region out to fullrun_mos2_xmm0112570101_pi300-10000_pass1_cl_src35_src.reg
[Sat Jan 28 08:48:09 2012] Extracting stamp from image fullrun_mos2_xmm0112570101_pi300-10000_cl_sm2.00.img.gz, (161, 121) - (311, 271)
[Sat Jan 28 08:48:09 2012] XMMSAS bgd. selection expression = annulus(20512.011032, 17009.128662, 4350.000000, 8700.000000, X, Y) && !ellipse(21382.145000, 26018.770200, 427.772812, 381.827211, 77.146808, X, Y) && !ellipse(24246.786400, 21488.259200, 395.825611, 395.825611, 0.000000, X, Y) && !ellipse(27195.976000, 22146.803800, 398.157611, 398.157611, 0.000000, X, Y) && !ellipse(15353.027588, 25862.929199, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17181.074997, 17592.891281, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16484.122580, 21040.465800, 473.784014, 473.784014, 0.000000, X, Y) && !ellipse(28386.055880, 25546.927800, 410.037612, 321.473609, 49.478200, X, Y) && !ellipse(16026.956329, 24272.582581, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27619.037262, 26001.301361, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21813.863800, 23558.857200, 373.460011, 373.460011, 0.000000, X, Y) && !ellipse(28128.983040, 24326.131600, 337.733610, 337.733610, 0.000000, X, Y) && !ellipse(23077.165980, 20473.534000, 517.610415, 517.610415, 0.000000, X, Y) && !ellipse(27502.343414, 24160.811157, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20322.903915, 21886.104187, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28770.443817, 14722.839127, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20026.056408, 12771.025823, 478.609257, 260.674725, 0.000000, X, Y) && !ellipse(29883.527679, 12331.479462, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28120.589400, 20874.399400, 385.381611, 385.381611, 0.000000, X, Y) && !ellipse(26077.022797, 21597.152039, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23908.256805, 23404.409241, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29902.070404, 26320.762451, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27498.902496, 24746.831879, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29135.337769, 24927.963287, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29440.525421, 25795.664032, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15480.219421, 18067.277313, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24516.532000, 26255.578000, 1157.840033, 1157.840033, 0.000000, X, Y)
[Sat Jan 28 08:48:09 2012] Writing fullrun_mos2_xmm0112570101_pi300-10000_pass1_cl_src35.gif
[Sat Jan 28 09:06:09 2012] Mean detx,y = (3142.01, -11843.56) 
[Sat Jan 28 09:06:10 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jan 28 09:08:06 2012] Binned source spectrum to 10 counts/bin
[Sat Jan 28 09:08:06 2012] Setting source spectrum file to fullrun_mos2_xmm0112570101_pi300-10000_pass1_cl_src35_src_b10.pi.gz
[Sat Jan 28 09:08:06 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112570101_pi300-10000_pass1_cl_src35_bgd.pi.gz
[Sat Jan 28 11:39:18 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jan 28 11:39:18 2012] rmf not generated due to insufficient counts
[Sat Jan 28 13:51:48 2012] Updating aperture counts using extracted products
[Sat Jan 28 13:51:48 2012] Error reading totcts from fullrun_mos2_xmm0112570101_pi300-10000_pass1_cl_src35_src_b10.pi.gz
[Sat Jan 28 13:51:50 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jan 28 13:51:50 2012] Using photon index=1.80, rate=0.0498, arf fullrun_mos2_xmm0112570101_pi300-10000_pass1_cl_src35.arf
[Sat Jan 28 13:51:50 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jan 28 13:51:50 2012] Updating source flux to 8.3e-13
[Sat Jan 28 13:59:05 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting