[Wed Jan 25 01:03:54 2012] Detection parameters:
  Position = (390.3, 268.1) = 0 42 15.07 41 12 33.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2850.2 +/- 65.0
  Background counts = 38.5
  Rate = 0.06 +/- 0.001

[Wed Jan 25 01:03:56 2012] Off-axis axis estimate = 7.01'
[Wed Jan 25 16:12:56 2012] Using EEF radius (= 9.93 ")to estimate initial spatial extent for simple fitting
[Wed Jan 25 16:12:56 2012] Initial guess for spatial extent in simple fitting = 9.93"
[Wed Jan 25 16:12:56 2012] source mask rpix=2.3, npix_max = 30, mask sum = 36, frac = 1.162
[Wed Jan 25 16:12:56 2012] Giving source the simple spatial ID 18 for pass 0, mean size = 9.93"
[Wed Jan 25 22:37:52 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_src18.ximg exists
[Wed Jan 25 22:37:52 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_src18_1.ximg exists
[Wed Jan 25 22:37:52 2012] Fit fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_src18 appears to have run properly
[Wed Jan 25 22:37:54 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Wed Jan 25 22:37:54 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Wed Jan 25 22:37:54 2012] Fit fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src18 appears to have run properly
[Wed Jan 25 22:38:54 2012] Warning, spatial fit 18 centroid is now closest to src. 126
[Wed Jan 25 22:38:54 2012] Spatial fit model total counts = 2405.290000, observed total counts = 2398.000000
[Wed Jan 25 22:38:54 2012] Offset between fit and detection position for source 29 = 1.080893 pixels
[Wed Jan 25 22:38:54 2012] Warning, changing simple spatial fit ID from 18 to 53
[Wed Jan 25 22:38:54 2012] 1679.524000 total counts/ 1140.640000 bgd. counts: snr = 15.955888
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 1.080893 pixels
  Position = (389.2, 268.3) = 0 42 15.49 41 12 34.3
  Extent = 5.6 (5.2-6.1)", rotation angle = 0
  Source counts = 538.9 +/- 41.0
  Background counts = 1140.6
  Rate = 0.008 +/- 0.0006
[Wed Jan 25 22:38:54 2012] Vigneting correction estimate = 1.000000
[Wed Jan 25 22:38:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 25 22:38:54 2012] Assessing source extent using major axis lower bound
[Wed Jan 25 22:38:54 2012] Source does appear to be extended
[Wed Jan 25 22:38:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan 26 18:45:16 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jan 26 18:45:16 2012] Initial guess for spatial extent in simple fitting = 5.58"
[Thu Jan 26 18:45:16 2012] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.944
[Thu Jan 26 18:45:16 2012] Giving source the simple spatial ID 18 for pass 1, mean size = 5.58"
[Fri Jan 27 00:06:07 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_src18.ximg exists
[Fri Jan 27 00:06:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_src18.csv
[Fri Jan 27 00:06:07 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_src18_1.ximg exists
[Fri Jan 27 00:06:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_src18.csv
[Fri Jan 27 00:06:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jan 27 00:06:08 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Fri Jan 27 00:06:08 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Fri Jan 27 00:06:08 2012] Fit fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src18 appears to have run properly
[Fri Jan 27 00:07:06 2012] Spatial fit model total counts = 3769.410000, observed total counts = 3768.000000
[Fri Jan 27 00:07:06 2012] Offset between fit and detection position for source 29 = 0.989010 pixels
[Fri Jan 27 00:07:06 2012] 3675.280000 total counts/ 1768.190000 bgd. counts: snr = 45.353074
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 0.989010 pixels
  Position = (390.2, 268.3) = 0 42 15.11 41 12 34.2
  Extent = 5.5 (5.3-5.7)", rotation angle = 0
  Source counts = 1907.1 +/- 60.6
  Background counts = 1768.2
  Rate = 0.03 +/- 0.001
[Fri Jan 27 00:07:06 2012] Spatial fit model total counts = 2392.420000, observed total counts = 2398.000000
[Fri Jan 27 00:07:06 2012] Offset between fit and detection position for source 29 = 0.945003 pixels
[Fri Jan 27 00:07:06 2012] Warning, changing simple spatial fit ID from 18 to 53
[Fri Jan 27 00:07:06 2012] 1647.599000 total counts/ 1122.690000 bgd. counts: snr = 15.665855
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 0.945003 pixels
  Position = (389.2, 268.3) = 0 42 15.47 41 12 34.3
  Extent = 5.6 (5.0-6.1)", rotation angle = 0
  Source counts = 524.9 +/- 40.6
  Background counts = 1122.7
  Rate = 0.008 +/- 0.0006
[Fri Jan 27 00:07:06 2012] Vigneting correction estimate = 1.000000
[Fri Jan 27 00:07:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan 27 00:07:06 2012] Assessing source extent using major axis lower bound
[Fri Jan 27 00:07:06 2012] Source does appear to be extended
[Fri Jan 27 00:07:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jan 27 00:07:06 2012] Source is confused with source 126
[Sat Jan 28 08:48:08 2012] XMMSAS src. selection expression = ellipse(33814.598000, 23294.978000, 336.417610, 336.417610, 0.000000, X, Y)
[Sat Jan 28 08:48:08 2012] Writing source region out to fullrun_mos2_xmm0112570101_pi300-10000_pass1_cl_src29_src.reg
[Sat Jan 28 08:48:08 2012] Extracting stamp from image fullrun_mos2_xmm0112570101_pi300-10000_cl_sm2.00.img.gz, (370, 249) - (409, 288)
[Sat Jan 28 08:48:08 2012] XMMSAS bgd. selection expression = annulus(33814.598000, 23294.978000, 560.696016, 1121.392032, X, Y) && !ellipse(31923.191600, 24459.388000, 1231.008035, 1231.008035, 0.000000, X, Y) && !ellipse(33161.473400, 23055.158600, 557.734416, 557.734416, 0.000000, X, Y) && !ellipse(33234.461395, 22914.837769, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32098.148682, 25110.716919, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34312.156000, 23461.389200, 1645.960047, 1645.960047, 0.000000, X, Y)
[Sat Jan 28 08:48:08 2012] Writing fullrun_mos2_xmm0112570101_pi300-10000_pass1_cl_src29.gif
[Sat Jan 28 09:02:30 2012] Mean detx,y = (-7178.09, -1305.81) 
[Sat Jan 28 09:02:31 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jan 28 09:02:38 2012] Binned source spectrum to 10 counts/bin
[Sat Jan 28 09:02:39 2012] Setting source spectrum file to fullrun_mos2_xmm0112570101_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Sat Jan 28 09:02:39 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112570101_pi300-10000_pass1_cl_src29_bgd.pi.gz
[Sat Jan 28 13:51:48 2012] Updating aperture counts using extracted products
[Sat Jan 28 13:51:48 2012] Error reading totcts from fullrun_mos2_xmm0112570101_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Sat Jan 28 13:51:50 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jan 28 13:51:50 2012] Using photon index=1.80, rate=0.00826, arf fullrun_mos2_xmm0112570101_pi300-10000_pass1_cl_src29.arf
[Sat Jan 28 13:51:50 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jan 28 13:51:50 2012] Updating source flux to 1.2e-13
[Sat Jan 28 13:59:05 2012] Flag c found in src. 29 procflags, skipping spectral fitting