[Wed Jan 25 01:03:53 2012] Detection parameters:
  Position = (329.5, 315.9) = 0 42 38.48 41 16 2.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 25524.1 +/- 188.0
  Background counts = 106.6
  Rate = 0.5 +/- 0.003

[Wed Jan 25 01:03:56 2012] Off-axis axis estimate = 2.58'
[Wed Jan 25 16:12:56 2012] Using EEF radius (= 7.72 ")to estimate initial spatial extent for simple fitting
[Wed Jan 25 16:12:56 2012] Initial guess for spatial extent in simple fitting = 7.72"
[Wed Jan 25 16:12:56 2012] source mask rpix=1.8, npix_max = 20, mask sum = 13, frac = 0.628
[Wed Jan 25 16:12:56 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.72"
[Wed Jan 25 22:37:52 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_src1.ximg exists
[Wed Jan 25 22:37:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_src1.csv
[Wed Jan 25 22:37:52 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Jan 25 22:37:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_src1.csv
[Wed Jan 25 22:37:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan 25 22:37:53 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Jan 25 22:37:53 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Jan 25 22:37:53 2012] Fit fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Jan 25 22:38:54 2012] Spatial fit model total counts = 27543.500000, observed total counts = 27558.000000
[Wed Jan 25 22:38:54 2012] Offset between fit and detection position for source 2 = 0.239029 pixels
[Wed Jan 25 22:38:54 2012] 27355.600000 total counts/ 10835.300000 bgd. counts: snr = 158.707503
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.239029 pixels
  Position = (329.6, 316.1) = 0 42 38.46 41 16 2.5
  Extent = 4.5 (4.5-4.6)", rotation angle = 0
  Source counts = 16520.3 +/- 165.4
  Background counts = 10835.3
  Rate = 0.3 +/- 0.003
[Wed Jan 25 22:38:54 2012] Spatial fit model total counts = 23282.900000, observed total counts = 28411.000000
[Wed Jan 25 22:38:54 2012] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jan 25 22:38:54 2012] Vigneting correction estimate = 1.000000
[Wed Jan 25 22:38:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 25 22:38:54 2012] Assessing source extent using major axis lower bound
[Wed Jan 25 22:38:54 2012] Source does appear to be extended
[Wed Jan 25 22:38:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 25 22:38:54 2012] Source is confused with source 51
[Thu Jan 26 18:45:16 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jan 26 18:45:16 2012] Initial guess for spatial extent in simple fitting = 4.55"
[Thu Jan 26 18:45:16 2012] source mask rpix=1.0, npix_max = 9, mask sum = 6, frac = 0.628
[Thu Jan 26 18:45:16 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 4.55"
[Fri Jan 27 00:06:06 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_src1.ximg exists
[Fri Jan 27 00:06:06 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_src1.csv
[Fri Jan 27 00:06:06 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Jan 27 00:06:06 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_src1.csv
[Fri Jan 27 00:06:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jan 27 00:06:07 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Jan 27 00:06:07 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Jan 27 00:06:07 2012] Fit fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Jan 27 00:07:06 2012] Spatial fit model total counts = 27419.200000, observed total counts = 27421.000000
[Fri Jan 27 00:07:06 2012] Offset between fit and detection position for source 2 = 0.009051 pixels
[Fri Jan 27 00:07:06 2012] 26949.100000 total counts/ 10432.800000 bgd. counts: snr = 161.700857
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.009051 pixels
  Position = (329.6, 316.1) = 0 42 38.46 41 16 2.6
  Extent = 4.5 (4.5-4.6)", rotation angle = 0
  Source counts = 16516.3 +/- 164.2
  Background counts = 10432.8
  Rate = 0.3 +/- 0.003
[Fri Jan 27 00:07:06 2012] Vigneting correction estimate = 1.000000
[Fri Jan 27 00:07:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan 27 00:07:06 2012] Assessing source extent using major axis lower bound
[Fri Jan 27 00:07:06 2012] Source does appear to be extended
[Fri Jan 27 00:07:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jan 28 08:48:07 2012] Counts = 16516.300000, rescaling region sizes by 3.000000
[Sat Jan 28 08:48:07 2012] XMMSAS src. selection expression = ellipse(28623.103600, 27453.785600, 816.233423, 816.233423, 0.000000, X, Y)
[Sat Jan 28 08:48:07 2012] Writing source region out to fullrun_mos2_xmm0112570101_pi300-10000_pass1_cl_src2_src.reg
[Sat Jan 28 08:48:07 2012] Extracting stamp from image fullrun_mos2_xmm0112570101_pi300-10000_cl_sm2.00.img.gz, (283, 269) - (376, 363)
[Sat Jan 28 08:48:07 2012] XMMSAS bgd. selection expression = annulus(28623.103600, 27453.785600, 4081.167117, 8162.334235, X, Y) && !ellipse(32130.092000, 26899.288000, 303.677609, 303.677609, 0.000000, X, Y) && !ellipse(26682.092000, 27907.668000, 446.745613, 446.745613, 0.000000, X, Y) && !ellipse(26383.662600, 26636.591600, 486.007214, 486.007214, 0.000000, X, Y) && !ellipse(23085.579800, 26681.375115, 464.166433, 379.313825, 56.352591, X, Y) && !ellipse(21382.145000, 26018.770200, 427.772812, 381.827211, 77.146808, X, Y) && !ellipse(24913.193248, 27456.407994, 325.671986, 325.239337, 88.752114, X, Y) && !ellipse(30286.645638, 27814.385848, 418.897106, 370.675634, 38.739179, X, Y) && !ellipse(30925.947900, 23046.840000, 407.055212, 407.055212, 0.000000, X, Y) && !ellipse(25465.169800, 26983.381600, 300.711209, 300.711209, 0.000000, X, Y) && !ellipse(34355.951080, 30505.492188, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22317.730000, 28107.784000, 1258.200036, 1258.200036, 0.000000, X, Y) && !ellipse(33135.550000, 25046.398000, 534.864815, 283.299208, 0.000000, X, Y) && !ellipse(25465.088600, 30879.632800, 406.448812, 346.452010, 4.084000, X, Y) && !ellipse(27656.610000, 27227.454000, 1127.632032, 1127.632032, 358.957000, X, Y) && !ellipse(23803.056420, 27511.280480, 369.652811, 369.652811, 0.000000, X, Y) && !ellipse(23861.171420, 31377.450000, 407.056012, 407.056012, 0.000000, X, Y) && !ellipse(33814.598000, 23294.978000, 448.556813, 448.556813, 0.000000, X, Y) && !ellipse(27696.151000, 27196.964600, 614.860018, 614.860018, 0.000000, X, Y) && !ellipse(30053.710478, 24059.917200, 441.231213, 441.231213, 0.000000, X, Y) && !ellipse(21563.774338, 31004.799652, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24246.786400, 21488.259200, 395.825611, 395.825611, 0.000000, X, Y) && !ellipse(35542.232260, 30097.864400, 324.290409, 324.290409, 0.000000, X, Y) && !ellipse(22908.121400, 29894.904800, 345.339210, 345.339210, 0.000000, X, Y) && !ellipse(27195.976000, 22146.803800, 398.157611, 398.157611, 0.000000, X, Y) && !ellipse(32473.232635, 27416.915192, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30943.950000, 20201.734400, 452.936813, 364.569610, 351.305060, X, Y) && !ellipse(31923.191600, 24459.388000, 1231.008035, 1231.008035, 0.000000, X, Y) && !ellipse(30263.511200, 31760.018400, 356.492010, 356.492010, 0.000000, X, Y) && !ellipse(34560.796820, 29746.577600, 385.977611, 252.542407, 58.712500, X, Y) && !ellipse(31634.827820, 24594.844600, 288.560808, 288.560808, 0.000000, X, Y) && !ellipse(33161.473400, 23055.158600, 557.734416, 557.734416, 0.000000, X, Y) && !ellipse(22166.213600, 29993.054400, 333.871210, 333.871210, 0.000000, X, Y) && !ellipse(28386.055880, 25546.927800, 410.037612, 321.473609, 49.478200, X, Y) && !ellipse(27141.402802, 26755.239410, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28128.056824, 27705.301819, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29667.652557, 27786.447479, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27619.037262, 26001.301361, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28242.069092, 30678.236359, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27139.232145, 29133.944746, 1215.313826, 403.760462, 98.657810, X, Y) && !ellipse(24807.110000, 30508.554400, 310.551209, 225.767206, -0.000000, X, Y) && !ellipse(35327.918000, 29454.196000, 548.290416, 250.082407, 16.674300, X, Y) && !ellipse(35273.356628, 33172.060242, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33234.461395, 22914.837769, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31448.680725, 31277.484436, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26200.593400, 30102.024600, 288.051208, 288.051208, 0.000000, X, Y) && !ellipse(33781.134583, 29007.147644, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32454.458923, 25354.820312, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22819.883301, 27425.772369, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21813.863800, 23558.857200, 373.460011, 373.460011, 0.000000, X, Y) && !ellipse(34656.777160, 21188.832400, 402.584812, 402.584812, 0.000000, X, Y) && !ellipse(24176.446625, 26773.208649, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29371.943359, 32275.138245, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28128.983040, 24326.131600, 337.733610, 337.733610, 0.000000, X, Y) && !ellipse(32098.148682, 25110.716919, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33794.831214, 32837.941200, 526.928015, 526.928015, 0.000000, X, Y) && !ellipse(23077.165980, 20473.534000, 517.610415, 517.610415, 0.000000, X, Y) && !ellipse(27502.343414, 24160.811157, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26173.466736, 28755.246429, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29613.062930, 34354.056778, 611.511856, 356.304073, 31.382391, X, Y) && !ellipse(27903.095600, 33506.398200, 302.628009, 302.628009, 0.000000, X, Y) && !ellipse(21240.762146, 29990.647491, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34312.156000, 23461.389200, 1645.960047, 1645.960047, 0.000000, X, Y) && !ellipse(34613.072800, 28362.767200, 390.692811, 390.692811, 0.000000, X, Y) && !ellipse(26179.427200, 29416.956800, 473.640814, 473.640814, 0.000000, X, Y) && !ellipse(35612.520691, 20761.456345, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22115.265076, 32619.192871, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20322.903915, 21886.104187, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25504.415283, 29349.532257, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34972.417023, 26400.899200, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25160.538544, 28832.874176, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28120.589400, 20874.399400, 385.381611, 385.381611, 0.000000, X, Y) && !ellipse(26744.882141, 33779.642456, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26077.022797, 21597.152039, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23908.256805, 23404.409241, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33865.960114, 29825.310852, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29956.081665, 26761.484039, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29902.070404, 26320.762451, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27498.902496, 24746.831879, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31491.548828, 27026.315247, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29135.337769, 24927.963287, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29440.525421, 25795.664032, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24516.532000, 26255.578000, 1157.840033, 1157.840033, 0.000000, X, Y)
[Sat Jan 28 08:48:07 2012] Writing fullrun_mos2_xmm0112570101_pi300-10000_pass1_cl_src2.gif
[Sat Jan 28 08:48:22 2012] Mean detx,y = (-785.97, 731.70) 
[Sat Jan 28 08:48:23 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jan 28 08:50:13 2012] Binned source spectrum to 10 counts/bin
[Sat Jan 28 08:50:13 2012] Setting source spectrum file to fullrun_mos2_xmm0112570101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Jan 28 08:50:13 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112570101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sat Jan 28 13:51:47 2012] Updating aperture counts using extracted products
[Sat Jan 28 13:51:47 2012] Error reading totcts from fullrun_mos2_xmm0112570101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Jan 28 13:51:50 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jan 28 13:51:50 2012] Using photon index=1.80, rate=0.26, arf fullrun_mos2_xmm0112570101_pi300-10000_pass1_cl_src2.arf
[Sat Jan 28 13:51:50 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jan 28 13:51:50 2012] Updating source flux to 2.4e-12
[Sat Jan 28 13:59:05 2012] Flag p found in src. 2 procflags, skipping spectral fitting
[Sat Jan 28 13:59:05 2012] Flag c found in src. 2 procflags, skipping spectral fitting
[Sat Jan 28 14:07:25 2012] Reading fit data from xmm0112570101/analysis//spectral/fullrun_mos2_xmm0112570101_pi300-10000_pass1_cl_src2_pl.csv
[Sat Jan 28 14:07:25 2012] Spectral fit parameter nH value = 8.94241e+20
[Sat Jan 28 14:07:25 2012] Spectral fit parameter PhoIndex value = 1.76599
[Sat Jan 28 14:07:25 2012] Failed to get F(0.3-8.0) from xmm0112570101/analysis//spectral/fullrun_mos2_xmm0112570101_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Sat Jan 28 14:07:25 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jan 28 14:07:25 2012] Using Nh = 8.9e+20, photon index=1.77, rate=0.26, arf fullrun_mos2_xmm0112570101_pi300-10000_pass1_cl_src2.arf
[Sat Jan 28 14:07:25 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jan 28 14:07:25 2012] Updating source flux to 2.7e-12