[Wed Jan 25 01:03:54 2012] Detection parameters:
  Position = (259.3, 329.9) = 0 43 5.59 41 17 3.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3877.8 +/- 75.6
  Background counts = 67.7
  Rate = 0.08 +/- 0.001

[Wed Jan 25 01:03:56 2012] Off-axis axis estimate = 3.64'
[Wed Jan 25 16:12:56 2012] Using EEF radius (= 8.25 ")to estimate initial spatial extent for simple fitting
[Wed Jan 25 16:12:56 2012] Initial guess for spatial extent in simple fitting = 8.25"
[Wed Jan 25 16:12:56 2012] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.088
[Wed Jan 25 16:12:56 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 8.25"
[Wed Jan 25 22:37:52 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_src12.ximg exists
[Wed Jan 25 22:37:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_src12.csv
[Wed Jan 25 22:37:52 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_src12_1.ximg exists
[Wed Jan 25 22:37:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_src12.csv
[Wed Jan 25 22:37:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan 25 22:37:54 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Wed Jan 25 22:37:54 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Wed Jan 25 22:37:54 2012] Fit fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src12 appears to have run properly
[Wed Jan 25 22:38:54 2012] Warning, spatial fit 12 centroid is now closest to src. 15
[Wed Jan 25 22:38:54 2012] Spatial fit model total counts = 2991.490000, observed total counts = 2992.000000
[Wed Jan 25 22:38:54 2012] Offset between fit and detection position for source 16 = 6.613552 pixels
[Wed Jan 25 22:38:54 2012] Warning, changing simple spatial fit ID from 12 to 59
[Wed Jan 25 22:38:54 2012] 2876.799000 total counts/ 2209.310000 bgd. counts: snr = 14.200897
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 6.613552 pixels
  Position = (257.1, 323.6) = 0 43 6.43 41 16 35.2
  Extent = 15.7 (15.7-31.5)", rotation angle = 0
  Source counts = 667.5 +/- 53.6
  Background counts = 2209.3
  Rate = 0.01 +/- 0.0008
[Wed Jan 25 22:38:54 2012] Vigneting correction estimate = 1.000000
[Wed Jan 25 22:38:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 25 22:38:54 2012] Assessing source extent using major axis lower bound
[Wed Jan 25 22:38:54 2012] Source does appear to be extended
[Wed Jan 25 22:38:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 25 22:38:54 2012] Source is confused with source 68
[Thu Jan 26 18:45:16 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jan 26 18:45:16 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jan 26 18:45:16 2012] Initial guess for spatial extent in simple fitting = 15.73"
[Thu Jan 26 18:45:16 2012] source mask rpix=3.6, npix_max = 67, mask sum = 64, frac = 0.945
[Thu Jan 26 18:45:16 2012] Giving source the simple spatial ID 12 for pass 1, mean size = 15.73"
[Fri Jan 27 00:06:07 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_src12.ximg exists
[Fri Jan 27 00:06:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_src12.csv
[Fri Jan 27 00:06:07 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_src12_1.ximg exists
[Fri Jan 27 00:06:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_src12.csv
[Fri Jan 27 00:06:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jan 27 00:06:08 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Fri Jan 27 00:06:08 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Fri Jan 27 00:06:08 2012] Fit fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src12 appears to have run properly
[Fri Jan 27 00:07:06 2012] Warning: source 12 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 16 at 20.252246 pixels away
[Fri Jan 27 00:07:06 2012] Vigneting correction estimate = 1.000000
[Fri Jan 27 00:07:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan 27 00:07:06 2012] Assessing source extent using major axis lower bound
[Fri Jan 27 00:07:06 2012] Source does appear to be extended
[Fri Jan 27 00:07:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jan 28 08:48:08 2012] XMMSAS src. selection expression = ellipse(22317.730000, 28107.784000, 943.650027, 943.650027, 0.000000, X, Y)
[Sat Jan 28 08:48:08 2012] Writing source region out to fullrun_mos2_xmm0112570101_pi300-10000_pass1_cl_src16_src.reg
[Sat Jan 28 08:48:08 2012] Extracting stamp from image fullrun_mos2_xmm0112570101_pi300-10000_cl_sm2.00.img.gz, (203, 269) - (311, 378)
[Sat Jan 28 08:48:08 2012] XMMSAS bgd. selection expression = annulus(22317.730000, 28107.784000, 1572.750045, 3145.500091, X, Y) && !ellipse(23085.579800, 26681.375115, 464.166433, 379.313825, 56.352591, X, Y) && !ellipse(21382.145000, 26018.770200, 427.772812, 381.827211, 77.146808, X, Y) && !ellipse(24913.193248, 27456.407994, 325.671986, 325.239337, 88.752114, X, Y) && !ellipse(25465.169800, 26983.381600, 300.711209, 300.711209, 0.000000, X, Y) && !ellipse(25465.088600, 30879.632800, 406.448812, 346.452010, 4.084000, X, Y) && !ellipse(23803.056420, 27511.280480, 369.652811, 369.652811, 0.000000, X, Y) && !ellipse(23861.171420, 31377.450000, 407.056012, 407.056012, 0.000000, X, Y) && !ellipse(21563.774338, 31004.799652, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22908.121400, 29894.904800, 345.339210, 345.339210, 0.000000, X, Y) && !ellipse(22166.213600, 29993.054400, 333.871210, 333.871210, 0.000000, X, Y) && !ellipse(24807.110000, 30508.554400, 310.551209, 225.767206, -0.000000, X, Y) && !ellipse(22819.883301, 27425.772369, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24176.446625, 26773.208649, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19017.373900, 29598.999800, 400.006412, 400.006412, 0.000000, X, Y) && !ellipse(26173.466736, 28755.246429, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21240.762146, 29990.647491, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25504.415283, 29349.532257, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25160.538544, 28832.874176, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24516.532000, 26255.578000, 1157.840033, 1157.840033, 0.000000, X, Y)
[Sat Jan 28 08:48:08 2012] Writing fullrun_mos2_xmm0112570101_pi300-10000_pass1_cl_src16.gif
[Sat Jan 28 08:56:00 2012] Mean detx,y = (5267.10, -523.02) 
[Sat Jan 28 08:56:01 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jan 28 08:56:17 2012] Binned source spectrum to 10 counts/bin
[Sat Jan 28 08:56:17 2012] Setting source spectrum file to fullrun_mos2_xmm0112570101_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Sat Jan 28 08:56:17 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112570101_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Sat Jan 28 13:51:48 2012] Updating aperture counts using extracted products
[Sat Jan 28 13:51:48 2012] Error reading totcts from fullrun_mos2_xmm0112570101_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Sat Jan 28 13:51:50 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jan 28 13:51:50 2012] Using photon index=1.80, rate=0.0105, arf fullrun_mos2_xmm0112570101_pi300-10000_pass1_cl_src16.arf
[Sat Jan 28 13:51:50 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jan 28 13:51:50 2012] Updating source flux to 1.2e-13
[Sat Jan 28 13:59:05 2012] Flag c found in src. 16 procflags, skipping spectral fitting