[Wed Jan 25 01:03:54 2012] Detection parameters:
  Position = (264.0, 344.1) = 0 43 3.75 41 18 5.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2209.3 +/- 57.8
  Background counts = 67.2
  Rate = 0.04 +/- 0.001

[Wed Jan 25 01:03:56 2012] Off-axis axis estimate = 4.15'
[Wed Jan 25 16:12:56 2012] Using EEF radius (= 8.50 ")to estimate initial spatial extent for simple fitting
[Wed Jan 25 16:12:56 2012] Initial guess for spatial extent in simple fitting = 8.50"
[Wed Jan 25 16:12:56 2012] source mask rpix=2.0, npix_max = 24, mask sum = 20, frac = 0.830
[Wed Jan 25 16:12:56 2012] Giving source the simple spatial ID 25 for pass 0, mean size = 8.50"
[Wed Jan 25 22:37:52 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_src25.ximg exists
[Wed Jan 25 22:37:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_src25.csv
[Wed Jan 25 22:37:52 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_src25_1.ximg exists
[Wed Jan 25 22:37:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_src25.csv
[Wed Jan 25 22:37:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan 25 22:37:54 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Wed Jan 25 22:37:54 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Wed Jan 25 22:37:54 2012] Fit fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src25 appears to have run properly
[Wed Jan 25 22:38:54 2012] Source 15 is offset by -2.568017 and 5.539161 pixels which is larger than
2 X fitted extent = 0.948230 x 0.948230, not incorporating fit results
[Wed Jan 25 22:38:54 2012] Spatial fit model total counts = 3183.000000, observed total counts = 3183.000000
[Wed Jan 25 22:38:54 2012] Offset between fit and detection position for source 15 = 0.158662 pixels
[Wed Jan 25 22:38:54 2012] 2838.130000 total counts/ 1433.310000 bgd. counts: snr = 37.106553
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 0.158662 pixels
  Position = (263.9, 344.2) = 0 43 3.81 41 18 4.6
  Extent = 4.4 (4.2-4.7)", rotation angle = 0
  Source counts = 1404.8 +/- 53.3
  Background counts = 1433.3
  Rate = 0.02 +/- 0.0008
[Wed Jan 25 22:38:54 2012] Vigneting correction estimate = 1.000000
[Wed Jan 25 22:38:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 25 22:38:54 2012] Assessing source extent using major axis lower bound
[Wed Jan 25 22:38:54 2012] Source does appear to be extended
[Wed Jan 25 22:38:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan 26 18:45:16 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jan 26 18:45:16 2012] Initial guess for spatial extent in simple fitting = 4.40"
[Thu Jan 26 18:45:16 2012] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.985
[Thu Jan 26 18:45:16 2012] Giving source the simple spatial ID 25 for pass 1, mean size = 4.40"
[Fri Jan 27 00:06:07 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_src25.ximg exists
[Fri Jan 27 00:06:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_src25.csv
[Fri Jan 27 00:06:07 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_src25_1.ximg exists
[Fri Jan 27 00:06:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_src25.csv
[Fri Jan 27 00:06:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jan 27 00:06:08 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Fri Jan 27 00:06:08 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Fri Jan 27 00:06:08 2012] Fit fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src25 appears to have run properly
[Fri Jan 27 00:07:06 2012] Spatial fit model total counts = 3395.970000, observed total counts = 3396.000000
[Fri Jan 27 00:07:06 2012] Offset between fit and detection position for source 15 = 0.001499 pixels
[Fri Jan 27 00:07:06 2012] 3003.690000 total counts/ 1625.660000 bgd. counts: snr = 34.177777
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 0.001499 pixels
  Position = (263.9, 344.2) = 0 43 3.81 41 18 4.6
  Extent = 4.3 (4.1-4.6)", rotation angle = 0
  Source counts = 1378.0 +/- 54.8
  Background counts = 1625.7
  Rate = 0.02 +/- 0.0009
[Fri Jan 27 00:07:06 2012] Vigneting correction estimate = 1.000000
[Fri Jan 27 00:07:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan 27 00:07:06 2012] Assessing source extent using major axis lower bound
[Fri Jan 27 00:07:06 2012] Source does appear to be extended
[Fri Jan 27 00:07:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jan 28 08:48:09 2012] Counts = 1378.030000, rescaling region sizes by 2.000000
[Sat Jan 28 08:48:09 2012] XMMSAS src. selection expression = ellipse(22908.121400, 29894.904800, 518.008815, 518.008815, 0.000000, X, Y)
[Sat Jan 28 08:48:09 2012] Writing source region out to fullrun_mos2_xmm0112570101_pi300-10000_pass1_cl_src15_src.reg
[Sat Jan 28 08:48:09 2012] Extracting stamp from image fullrun_mos2_xmm0112570101_pi300-10000_cl_sm2.00.img.gz, (234, 314) - (294, 374)
[Sat Jan 28 08:48:09 2012] XMMSAS bgd. selection expression = annulus(22908.121400, 29894.904800, 1726.696050, 3453.392099, X, Y) && !ellipse(26682.092000, 27907.668000, 446.745613, 446.745613, 0.000000, X, Y) && !ellipse(26383.662600, 26636.591600, 486.007214, 486.007214, 0.000000, X, Y) && !ellipse(23085.579800, 26681.375115, 464.166433, 379.313825, 56.352591, X, Y) && !ellipse(21382.145000, 26018.770200, 427.772812, 381.827211, 77.146808, X, Y) && !ellipse(24913.193248, 27456.407994, 325.671986, 325.239337, 88.752114, X, Y) && !ellipse(25465.169800, 26983.381600, 300.711209, 300.711209, 0.000000, X, Y) && !ellipse(22317.730000, 28107.784000, 1258.200036, 1258.200036, 0.000000, X, Y) && !ellipse(25465.088600, 30879.632800, 406.448812, 346.452010, 4.084000, X, Y) && !ellipse(23803.056420, 27511.280480, 369.652811, 369.652811, 0.000000, X, Y) && !ellipse(23861.171420, 31377.450000, 407.056012, 407.056012, 0.000000, X, Y) && !ellipse(21563.774338, 31004.799652, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19518.729780, 32524.066000, 432.251212, 432.251212, 0.000000, X, Y) && !ellipse(22166.213600, 29993.054400, 333.871210, 333.871210, 0.000000, X, Y) && !ellipse(27141.402802, 26755.239410, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27139.232145, 29133.944746, 1215.313826, 403.760462, 98.657810, X, Y) && !ellipse(24807.110000, 30508.554400, 310.551209, 225.767206, -0.000000, X, Y) && !ellipse(26200.593400, 30102.024600, 288.051208, 288.051208, 0.000000, X, Y) && !ellipse(22819.883301, 27425.772369, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24176.446625, 26773.208649, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26173.466736, 28755.246429, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21240.762146, 29990.647491, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26179.427200, 29416.956800, 473.640814, 473.640814, 0.000000, X, Y) && !ellipse(22115.265076, 32619.192871, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25504.415283, 29349.532257, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25160.538544, 28832.874176, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26744.882141, 33779.642456, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24516.532000, 26255.578000, 1157.840033, 1157.840033, 0.000000, X, Y)
[Sat Jan 28 08:48:09 2012] Writing fullrun_mos2_xmm0112570101_pi300-10000_pass1_cl_src15.gif
[Sat Jan 28 09:09:16 2012] Mean detx,y = (5403.12, 1042.96) 
[Sat Jan 28 09:09:18 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jan 28 09:09:34 2012] Binned source spectrum to 10 counts/bin
[Sat Jan 28 09:09:34 2012] Setting source spectrum file to fullrun_mos2_xmm0112570101_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Sat Jan 28 09:09:34 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112570101_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Sat Jan 28 13:51:48 2012] Updating aperture counts using extracted products
[Sat Jan 28 13:51:48 2012] Error reading totcts from fullrun_mos2_xmm0112570101_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Sat Jan 28 13:51:50 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jan 28 13:51:50 2012] Using photon index=1.80, rate=0.0217, arf fullrun_mos2_xmm0112570101_pi300-10000_pass1_cl_src15.arf
[Sat Jan 28 13:51:50 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jan 28 13:51:50 2012] Updating source flux to 2.9e-13
[Sat Jan 28 13:59:05 2012] Flag b found in src. 15 procflags, skipping spectral fitting