[Wed Jan 25 01:03:54 2012] Detection parameters:
  Position = (293.4, 355.3) = 0 42 52.42 41 18 54.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3501.2 +/- 72.1
  Background counts = 69.8
  Rate = 0.07 +/- 0.001

[Wed Jan 25 01:03:56 2012] Off-axis axis estimate = 4.14'
[Wed Jan 25 16:12:56 2012] Using EEF radius (= 8.50 ")to estimate initial spatial extent for simple fitting
[Wed Jan 25 16:12:56 2012] Initial guess for spatial extent in simple fitting = 8.50"
[Wed Jan 25 16:12:56 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.038
[Wed Jan 25 16:12:56 2012] Giving source the simple spatial ID 14 for pass 0, mean size = 8.50"
[Wed Jan 25 22:37:52 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_src14.ximg exists
[Wed Jan 25 22:37:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_src14.csv
[Wed Jan 25 22:37:52 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_src14_1.ximg exists
[Wed Jan 25 22:37:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_src14.csv
[Wed Jan 25 22:37:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan 25 22:37:54 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Wed Jan 25 22:37:54 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Wed Jan 25 22:37:54 2012] Fit fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src14 appears to have run properly
[Wed Jan 25 22:38:54 2012] Warning: source 14 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 12 at 11.293844 pixels away
[Wed Jan 25 22:38:54 2012] Spatial fit model total counts = 3447.360000, observed total counts = 3441.000000
[Wed Jan 25 22:38:54 2012] Offset between fit and detection position for source 12 = 0.518949 pixels
[Wed Jan 25 22:38:54 2012] Warning, changing simple spatial fit ID from 14 to 50
[Wed Jan 25 22:38:54 2012] 3539.210000 total counts/ 2351.710000 bgd. counts: snr = 24.487347
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.518949 pixels
  Position = (292.9, 355.5) = 0 42 52.61 41 18 53.9
  Extent = 3.4 (3.3-3.7)", rotation angle = 0
  Source counts = 1187.5 +/- 59.5
  Background counts = 2351.7
  Rate = 0.02 +/- 0.0009
[Wed Jan 25 22:38:54 2012] Vigneting correction estimate = 1.000000
[Wed Jan 25 22:38:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 25 22:38:54 2012] Assessing source extent using major axis lower bound
[Wed Jan 25 22:38:54 2012] Source does appear to be extended
[Wed Jan 25 22:38:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan 26 18:45:16 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jan 26 18:45:16 2012] Initial guess for spatial extent in simple fitting = 3.45"
[Thu Jan 26 18:45:16 2012] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.898
[Thu Jan 26 18:45:16 2012] Giving source the simple spatial ID 14 for pass 1, mean size = 3.45"
[Fri Jan 27 00:06:07 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_src14.ximg exists
[Fri Jan 27 00:06:07 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_src14_1.ximg exists
[Fri Jan 27 00:06:07 2012] Fit fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_src14 appears to have run properly
[Fri Jan 27 00:06:08 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Fri Jan 27 00:06:08 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Fri Jan 27 00:06:08 2012] Fit fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src14 appears to have run properly
[Fri Jan 27 00:07:06 2012] Spatial fit model total counts = 4544.980000, observed total counts = 4548.000000
[Fri Jan 27 00:07:06 2012] Offset between fit and detection position for source 12 = 0.365479 pixels
[Fri Jan 27 00:07:06 2012] 4436.630000 total counts/ 2172.470000 bgd. counts: snr = 48.576947
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.365479 pixels
  Position = (293.3, 355.5) = 0 42 52.47 41 18 53.9
  Extent = 5.1 (4.9-5.4)" x 4.3 (4.1-4.5)", rotation angle = 4
  Source counts = 2264.2 +/- 66.6
  Background counts = 2172.5
  Rate = 0.04 +/- 0.001
[Fri Jan 27 00:07:06 2012] Vigneting correction estimate = 1.000000
[Fri Jan 27 00:07:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan 27 00:07:06 2012] Assessing source extent using major axis lower bound
[Fri Jan 27 00:07:06 2012] Source does appear to be extended
[Fri Jan 27 00:07:06 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.07
[Sat Jan 28 08:48:08 2012] Counts = 2264.160000, rescaling region sizes by 2.000000
[Sat Jan 28 08:48:08 2012] XMMSAS src. selection expression = ellipse(25465.088600, 30879.632800, 609.673218, 519.678015, 4.084000, X, Y)
[Sat Jan 28 08:48:08 2012] Writing source region out to fullrun_mos2_xmm0112570101_pi300-10000_pass1_cl_src12_src.reg
[Sat Jan 28 08:48:08 2012] Extracting stamp from image fullrun_mos2_xmm0112570101_pi300-10000_cl_sm2.00.img.gz, (258, 320) - (328, 391)
[Sat Jan 28 08:48:08 2012] XMMSAS bgd. selection expression = annulus(25465.088600, 30879.632800, 2032.244058, 4064.488117, X, Y) && !ellipse(28623.103600, 27453.785600, 1088.311231, 1088.311231, 0.000000, X, Y) && !ellipse(26682.092000, 27907.668000, 446.745613, 446.745613, 0.000000, X, Y) && !ellipse(26383.662600, 26636.591600, 486.007214, 486.007214, 0.000000, X, Y) && !ellipse(23085.579800, 26681.375115, 464.166433, 379.313825, 56.352591, X, Y) && !ellipse(24913.193248, 27456.407994, 325.671986, 325.239337, 88.752114, X, Y) && !ellipse(25465.169800, 26983.381600, 300.711209, 300.711209, 0.000000, X, Y) && !ellipse(22317.730000, 28107.784000, 1258.200036, 1258.200036, 0.000000, X, Y) && !ellipse(27656.610000, 27227.454000, 1127.632032, 1127.632032, 358.957000, X, Y) && !ellipse(23803.056420, 27511.280480, 369.652811, 369.652811, 0.000000, X, Y) && !ellipse(23861.171420, 31377.450000, 407.056012, 407.056012, 0.000000, X, Y) && !ellipse(27696.151000, 27196.964600, 614.860018, 614.860018, 0.000000, X, Y) && !ellipse(21563.774338, 31004.799652, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22908.121400, 29894.904800, 345.339210, 345.339210, 0.000000, X, Y) && !ellipse(22166.213600, 29993.054400, 333.871210, 333.871210, 0.000000, X, Y) && !ellipse(27141.402802, 26755.239410, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28128.056824, 27705.301819, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29667.652557, 27786.447479, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27619.037262, 26001.301361, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28242.069092, 30678.236359, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27139.232145, 29133.944746, 1215.313826, 403.760462, 98.657810, X, Y) && !ellipse(24807.110000, 30508.554400, 310.551209, 225.767206, -0.000000, X, Y) && !ellipse(26200.593400, 30102.024600, 288.051208, 288.051208, 0.000000, X, Y) && !ellipse(22819.883301, 27425.772369, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24176.446625, 26773.208649, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29371.943359, 32275.138245, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26173.466736, 28755.246429, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29613.062930, 34354.056778, 611.511856, 356.304073, 31.382391, X, Y) && !ellipse(27903.095600, 33506.398200, 302.628009, 302.628009, 0.000000, X, Y) && !ellipse(21240.762146, 29990.647491, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26179.427200, 29416.956800, 473.640814, 473.640814, 0.000000, X, Y) && !ellipse(22115.265076, 32619.192871, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25504.415283, 29349.532257, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25160.538544, 28832.874176, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26744.882141, 33779.642456, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29956.081665, 26761.484039, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29902.070404, 26320.762451, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24516.532000, 26255.578000, 1157.840033, 1157.840033, 0.000000, X, Y)
[Sat Jan 28 08:48:08 2012] Writing fullrun_mos2_xmm0112570101_pi300-10000_pass1_cl_src12.gif
[Sat Jan 28 08:56:38 2012] Mean detx,y = (3349.51, 2846.57) 
[Sat Jan 28 08:56:39 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jan 28 08:56:56 2012] Binned source spectrum to 10 counts/bin
[Sat Jan 28 08:56:56 2012] Setting source spectrum file to fullrun_mos2_xmm0112570101_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Sat Jan 28 08:56:56 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112570101_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Sat Jan 28 13:51:48 2012] Updating aperture counts using extracted products
[Sat Jan 28 13:51:48 2012] Error reading totcts from fullrun_mos2_xmm0112570101_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Sat Jan 28 13:51:50 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jan 28 13:51:50 2012] Using photon index=1.80, rate=0.0356, arf fullrun_mos2_xmm0112570101_pi300-10000_pass1_cl_src12.arf
[Sat Jan 28 13:51:50 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jan 28 13:51:50 2012] Updating source flux to 4.6e-13