[Wed Jan 25 01:03:55 2012] Detection parameters:
  Position = (301.4, 331.1) = 0 42 49.32 41 17 7.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 267.1 +/- 27.1
  Background counts = 94.8
  Rate = 0.005 +/- 0.0005

[Wed Jan 25 01:03:56 2012] Off-axis axis estimate = 2.38'
[Wed Jan 25 16:12:56 2012] Using EEF radius (= 7.62 ")to estimate initial spatial extent for simple fitting
[Wed Jan 25 16:12:56 2012] Initial guess for spatial extent in simple fitting = 7.62"
[Wed Jan 25 16:12:56 2012] source mask rpix=1.8, npix_max = 20, mask sum = 14, frac = 0.691
[Wed Jan 25 16:12:56 2012] Giving source the simple spatial ID 73 for pass 0, mean size = 7.62"
[Wed Jan 25 22:37:53 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_src73.ximg exists
[Wed Jan 25 22:37:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_src73.csv
[Wed Jan 25 22:37:53 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_src73_1.ximg exists
[Wed Jan 25 22:37:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_src73.csv
[Wed Jan 25 22:37:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_src73_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_src73.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan 25 22:37:55 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src73.ximg exists
[Wed Jan 25 22:37:55 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src73_1.ximg exists
[Wed Jan 25 22:37:55 2012] Fit fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src73 appears to have run properly
[Wed Jan 25 22:38:54 2012] Source 102 is offset by 1.144744 and 2.544189 pixels which is larger than
2 X fitted extent = 1.852989 x 1.852989, not incorporating fit results
[Wed Jan 25 22:38:54 2012] Source 102 is offset by -6.108727 and 6.081384 pixels which is larger than
2 X fitted extent = 5.082621 x 5.082621, not incorporating fit results
[Wed Jan 25 22:38:54 2012] Vigneting correction estimate = 1.000000
[Wed Jan 25 22:38:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 25 22:38:54 2012] Assessing source extent using major
[Wed Jan 25 22:38:54 2012] Source does appear to be extended
[Wed Jan 25 22:38:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 25 22:38:54 2012] Source is confused with source 99
[Thu Jan 26 18:45:16 2012] Using EEF radius (= 7.62 ")to estimate initial spatial extent for simple fitting
[Thu Jan 26 18:45:16 2012] Initial guess for spatial extent in simple fitting = 7.62"
[Thu Jan 26 18:45:16 2012] source mask rpix=1.8, npix_max = 20, mask sum = 14, frac = 0.691
[Thu Jan 26 18:45:16 2012] Giving source the simple spatial ID 73 for pass 1, mean size = 7.62"
[Fri Jan 27 00:06:07 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_src73.ximg exists
[Fri Jan 27 00:06:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_src73.csv
[Fri Jan 27 00:06:07 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_src73_1.ximg exists
[Fri Jan 27 00:06:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_src73.csv
[Fri Jan 27 00:06:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_src73_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_src73.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jan 27 00:06:08 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src73.ximg exists
[Fri Jan 27 00:06:08 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src73_1.ximg exists
[Fri Jan 27 00:06:08 2012] Fit fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src73 appears to have run properly
[Fri Jan 27 00:07:06 2012] Source 102 is offset by -5.928727 and 6.081384 pixels which is larger than
2 X fitted extent = 5.046023 x 5.046023, not incorporating fit results
[Fri Jan 27 00:07:06 2012] Vigneting correction estimate = 1.000000
[Fri Jan 27 00:07:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan 27 00:07:06 2012] Assessing source extent using major
[Fri Jan 27 00:07:06 2012] Source does appear to be extended
[Fri Jan 27 00:07:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jan 28 08:48:11 2012] XMMSAS src. selection expression = ellipse(26173.466736, 28755.246429, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jan 28 08:48:11 2012] Writing source region out to fullrun_mos2_xmm0112570101_pi300-10000_pass1_cl_src102_src.reg
[Sat Jan 28 08:48:11 2012] Extracting stamp from image fullrun_mos2_xmm0112570101_pi300-10000_cl_sm2.00.img.gz, (264, 294) - (339, 369)
[Sat Jan 28 08:48:11 2012] XMMSAS bgd. selection expression = annulus(26173.466736, 28755.246429, 1087.500000, 2175.000000, X, Y) && !ellipse(28623.103600, 27453.785600, 1088.311231, 1088.311231, 0.000000, X, Y) && !ellipse(26682.092000, 27907.668000, 446.745613, 446.745613, 0.000000, X, Y) && !ellipse(26383.662600, 26636.591600, 486.007214, 486.007214, 0.000000, X, Y) && !ellipse(24913.193248, 27456.407994, 325.671986, 325.239337, 88.752114, X, Y) && !ellipse(25465.169800, 26983.381600, 300.711209, 300.711209, 0.000000, X, Y) && !ellipse(25465.088600, 30879.632800, 406.448812, 346.452010, 4.084000, X, Y) && !ellipse(27656.610000, 27227.454000, 1127.632032, 1127.632032, 358.957000, X, Y) && !ellipse(23803.056420, 27511.280480, 369.652811, 369.652811, 0.000000, X, Y) && !ellipse(27696.151000, 27196.964600, 614.860018, 614.860018, 0.000000, X, Y) && !ellipse(27141.402802, 26755.239410, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28128.056824, 27705.301819, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27619.037262, 26001.301361, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28242.069092, 30678.236359, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27139.232145, 29133.944746, 1215.313826, 403.760462, 98.657810, X, Y) && !ellipse(24807.110000, 30508.554400, 310.551209, 225.767206, -0.000000, X, Y) && !ellipse(26200.593400, 30102.024600, 288.051208, 288.051208, 0.000000, X, Y) && !ellipse(24176.446625, 26773.208649, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26179.427200, 29416.956800, 473.640814, 473.640814, 0.000000, X, Y) && !ellipse(25504.415283, 29349.532257, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25160.538544, 28832.874176, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24516.532000, 26255.578000, 1157.840033, 1157.840033, 0.000000, X, Y)
[Sat Jan 28 08:48:11 2012] Writing fullrun_mos2_xmm0112570101_pi300-10000_pass1_cl_src102.gif
[Sat Jan 28 09:36:43 2012] Mean detx,y = (1881.91, 1041.31) 
[Sat Jan 28 09:36:45 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jan 28 09:36:54 2012] Binned source spectrum to 10 counts/bin
[Sat Jan 28 09:36:54 2012] Setting source spectrum file to fullrun_mos2_xmm0112570101_pi300-10000_pass1_cl_src102_src_b10.pi.gz
[Sat Jan 28 09:36:54 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112570101_pi300-10000_pass1_cl_src102_bgd.pi.gz
[Sat Jan 28 13:09:13 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jan 28 13:09:13 2012] rmf not generated due to insufficient counts
[Sat Jan 28 13:51:49 2012] Updating aperture counts using extracted products
[Sat Jan 28 13:51:49 2012] Error reading totcts from fullrun_mos2_xmm0112570101_pi300-10000_pass1_cl_src102_src_b10.pi.gz
[Sat Jan 28 13:51:51 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jan 28 13:51:51 2012] Using photon index=1.80, rate=0.005, arf fullrun_mos2_xmm0112570101_pi300-10000_pass1_cl_src102.arf
[Sat Jan 28 13:51:51 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jan 28 13:51:51 2012] Updating source flux to 4.9e-14
[Sat Jan 28 13:59:05 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting