[Wed Jan 25 01:03:53 2012] Detection parameters:
  Position = (370.0, 309.8) = 0 42 22.84 41 15 33.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 11064.9 +/- 126.5
  Background counts = 62.8
  Rate = 0.2 +/- 0.002

[Wed Jan 25 01:03:56 2012] Off-axis axis estimate = 5.26'
[Wed Jan 25 16:12:56 2012] Using EEF radius (= 9.06 ")to estimate initial spatial extent for simple fitting
[Wed Jan 25 16:12:56 2012] Initial guess for spatial extent in simple fitting = 9.06"
[Wed Jan 25 16:12:56 2012] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.125
[Wed Jan 25 16:12:56 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 9.06"
[Wed Jan 25 22:37:52 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_src2.ximg exists
[Wed Jan 25 22:37:52 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_src2_1.ximg exists
[Wed Jan 25 22:37:52 2012] Fit fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_src2 appears to have run properly
[Wed Jan 25 22:37:53 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Wed Jan 25 22:37:53 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Wed Jan 25 22:37:53 2012] Fit fullrun_mos2_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Wed Jan 25 22:38:54 2012] Spatial fit model total counts = 12229.800000, observed total counts = 12222.000000
[Wed Jan 25 22:38:54 2012] Offset between fit and detection position for source 1 = 0.247430 pixels
[Wed Jan 25 22:38:54 2012] 12515.210000 total counts/ 5258.550000 bgd. counts: snr = 100.069970
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.247430 pixels
  Position = (369.9, 309.6) = 0 42 22.91 41 15 34.1
  Extent = 5.2" x 4.3", rotation angle = 60
  Source counts = 7256.7 +/- 111.9
  Background counts = 5258.6
  Rate = 0.1 +/- 0.002
[Wed Jan 25 22:38:54 2012] Spatial fit model total counts = 9201.260000, observed total counts = 10140.000000
[Wed Jan 25 22:38:54 2012] Offset between fit and detection position for source 1 = 0.139075 pixels
[Wed Jan 25 22:38:54 2012] Warning, changing simple spatial fit ID from 2 to 27
[Wed Jan 25 22:38:54 2012] 8250.370000 total counts/ 3153.110000 bgd. counts: snr = 90.775202
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.139075 pixels
  Position = (369.9, 309.7) = 0 42 22.90 41 15 34.7
  Extent = 3.5 (3.5-3.6)", rotation angle = 0
  Source counts = 5097.3 +/- 90.8
  Background counts = 3153.1
  Rate = 0.08 +/- 0.001
[Wed Jan 25 22:38:54 2012] Vigneting correction estimate = 1.000000
[Wed Jan 25 22:38:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 25 22:38:54 2012] Assessing source extent using major axis lower bound
[Wed Jan 25 22:38:54 2012] Source does appear to be extended
[Wed Jan 25 22:38:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 25 22:38:54 2012] Source is confused with source 19
[Thu Jan 26 18:45:16 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jan 26 18:45:16 2012] Initial guess for spatial extent in simple fitting = 3.54"
[Thu Jan 26 18:45:16 2012] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.870
[Thu Jan 26 18:45:16 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 3.54"
[Fri Jan 27 00:06:06 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_src2.ximg exists
[Fri Jan 27 00:06:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_src2.csv
[Fri Jan 27 00:06:06 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_src2_1.ximg exists
[Fri Jan 27 00:06:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_src2.csv
[Fri Jan 27 00:06:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jan 27 00:06:07 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Fri Jan 27 00:06:07 2012] fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Fri Jan 27 00:06:08 2012] Fit fullrun_mos2_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Fri Jan 27 00:07:06 2012] Spatial fit model total counts = 12218.700000, observed total counts = 12222.000000
[Fri Jan 27 00:07:06 2012] Offset between fit and detection position for source 1 = 0.413352 pixels
[Fri Jan 27 00:07:06 2012] 12660.860000 total counts/ 9202.590000 bgd. counts: snr = 36.049883
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.413352 pixels
  Position = (369.5, 309.5) = 0 42 23.04 41 15 33.7
  Extent = 1.0 (0.9-1.2)", rotation angle = 0
  Source counts = 3458.3 +/- 112.5
  Background counts = 9202.6
  Rate = 0.05 +/- 0.002
[Fri Jan 27 00:07:06 2012] Spatial fit model total counts = 9302.920000, observed total counts = 10140.000000
[Fri Jan 27 00:07:06 2012] Offset between fit and detection position for source 1 = 0.390486 pixels
[Fri Jan 27 00:07:06 2012] Warning, changing simple spatial fit ID from 2 to 27
[Fri Jan 27 00:07:06 2012] 8748.630000 total counts/ 3321.260000 bgd. counts: snr = 94.175512
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.390486 pixels
  Position = (369.9, 309.7) = 0 42 22.91 41 15 34.7
  Extent = 3.8 (3.7-3.9)", rotation angle = 0
  Source counts = 5427.4 +/- 93.5
  Background counts = 3321.3
  Rate = 0.09 +/- 0.001
[Fri Jan 27 00:07:06 2012] Vigneting correction estimate = 1.000000
[Fri Jan 27 00:07:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan 27 00:07:06 2012] Assessing source extent using major axis lower bound
[Fri Jan 27 00:07:06 2012] Source does appear to be extended
[Fri Jan 27 00:07:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jan 28 08:48:07 2012] Counts = 5427.370000, rescaling region sizes by 2.000000
[Sat Jan 28 08:48:07 2012] XMMSAS src. selection expression = ellipse(32130.092000, 26899.288000, 455.516413, 455.516413, 0.000000, X, Y)
[Sat Jan 28 08:48:07 2012] Writing source region out to fullrun_mos2_xmm0112570101_pi300-10000_pass1_cl_src1_src.reg
[Sat Jan 28 08:48:07 2012] Extracting stamp from image fullrun_mos2_xmm0112570101_pi300-10000_cl_sm2.00.img.gz, (344, 284) - (396, 336)
[Sat Jan 28 08:48:07 2012] XMMSAS bgd. selection expression = annulus(32130.092000, 26899.288000, 1518.388044, 3036.776087, X, Y) && !ellipse(28623.103600, 27453.785600, 1088.311231, 1088.311231, 0.000000, X, Y) && !ellipse(30286.645638, 27814.385848, 418.897106, 370.675634, 38.739179, X, Y) && !ellipse(34355.951080, 30505.492188, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33135.550000, 25046.398000, 534.864815, 283.299208, 0.000000, X, Y) && !ellipse(30053.710478, 24059.917200, 441.231213, 441.231213, 0.000000, X, Y) && !ellipse(32473.232635, 27416.915192, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31923.191600, 24459.388000, 1231.008035, 1231.008035, 0.000000, X, Y) && !ellipse(34560.796820, 29746.577600, 385.977611, 252.542407, 58.712500, X, Y) && !ellipse(31634.827820, 24594.844600, 288.560808, 288.560808, 0.000000, X, Y) && !ellipse(29667.652557, 27786.447479, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28242.069092, 30678.236359, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35327.918000, 29454.196000, 548.290416, 250.082407, 16.674300, X, Y) && !ellipse(33781.134583, 29007.147644, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32454.458923, 25354.820312, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32098.148682, 25110.716919, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34312.156000, 23461.389200, 1645.960047, 1645.960047, 0.000000, X, Y) && !ellipse(34613.072800, 28362.767200, 390.692811, 390.692811, 0.000000, X, Y) && !ellipse(34972.417023, 26400.899200, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33865.960114, 29825.310852, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29956.081665, 26761.484039, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29902.070404, 26320.762451, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31491.548828, 27026.315247, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29135.337769, 24927.963287, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29440.525421, 25795.664032, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jan 28 08:48:07 2012] Writing fullrun_mos2_xmm0112570101_pi300-10000_pass1_cl_src1.gif
[Sat Jan 28 08:50:20 2012] Mean detx,y = (-4289.59, 1458.99) 
[Sat Jan 28 08:50:21 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jan 28 08:50:37 2012] Binned source spectrum to 10 counts/bin
[Sat Jan 28 08:50:37 2012] Setting source spectrum file to fullrun_mos2_xmm0112570101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Jan 28 08:50:37 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112570101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat Jan 28 13:51:47 2012] Updating aperture counts using extracted products
[Sat Jan 28 13:51:47 2012] Error reading totcts from fullrun_mos2_xmm0112570101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Jan 28 13:51:50 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jan 28 13:51:50 2012] Using photon index=1.80, rate=0.0854, arf fullrun_mos2_xmm0112570101_pi300-10000_pass1_cl_src1.arf
[Sat Jan 28 13:51:50 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jan 28 13:51:50 2012] Updating source flux to 1.1e-12
[Sat Jan 28 13:59:05 2012] Flag c found in src. 1 procflags, skipping spectral fitting