[Wed Jan 25 01:02:53 2012] Detection parameters:
  Position = (244.8, 345.3) = 0 43 11.16 41 18 8.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 147.8 +/- 16.3
  Background counts = 46.9
  Rate = 0.004 +/- 0.0005

[Wed Jan 25 01:02:54 2012] Off-axis axis estimate = 5.16'
[Wed Jan 25 09:18:43 2012] Using EEF radius (= 9.01 ")to estimate initial spatial extent for simple fitting
[Wed Jan 25 09:18:43 2012] Initial guess for spatial extent in simple fitting = 9.01"
[Wed Jan 25 09:18:43 2012] source mask rpix=2.1, npix_max = 26, mask sum = 19, frac = 0.718
[Wed Jan 25 09:18:43 2012] Giving source the simple spatial ID 72 for pass 0, mean size = 9.01"
[Wed Jan 25 16:12:53 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_src72.ximg exists
[Wed Jan 25 16:12:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_src72.csv
[Wed Jan 25 16:12:53 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_src72_1.ximg exists
[Wed Jan 25 16:12:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_src72.csv
[Wed Jan 25 16:12:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_src72_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_src72.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan 25 16:12:55 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src72.ximg exists
[Wed Jan 25 16:12:55 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src72_1.ximg exists
[Wed Jan 25 16:12:55 2012] Fit fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src72 appears to have run properly
[Wed Jan 25 22:38:36 2012] Spatial fit model total counts = 594.676000, observed total counts = 593.000000
[Wed Jan 25 22:38:36 2012] Offset between fit and detection position for source 99 = 0.867271 pixels
[Wed Jan 25 22:38:36 2012] 602.049000 total counts/ 478.033000 bgd. counts: snr = 5.672164
Spatial fit parameters:
  Offset between fit and detection position for source 99 = 0.867271 pixels
  Position = (244.0, 345.0) = 0 43 11.47 41 18 8.2
  Extent = 5.9 (4.6-7.4)", rotation angle = 0
  Source counts = 124.0 +/- 24.5
  Background counts = 478.0
  Rate = 0.002 +/- 0.0004
[Wed Jan 25 22:38:36 2012] Vigneting correction estimate = 1.000000
[Wed Jan 25 22:38:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 25 22:38:36 2012] Assessing source extent using major axis lower bound
[Wed Jan 25 22:38:36 2012] Source does appear to be extended
[Wed Jan 25 22:38:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 25 22:38:36 2012] Source is confused with source 14
[Thu Jan 26 13:17:26 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jan 26 13:17:26 2012] Initial guess for spatial extent in simple fitting = 5.87"
[Thu Jan 26 13:17:26 2012] source mask rpix=1.3, npix_max = 13, mask sum = 14, frac = 1.024
[Thu Jan 26 13:17:26 2012] Giving source the simple spatial ID 71 for pass 1, mean size = 5.87"
[Thu Jan 26 18:45:14 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_src71.ximg exists
[Thu Jan 26 18:45:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_src71.csv
[Thu Jan 26 18:45:14 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_src71_1.ximg exists
[Thu Jan 26 18:45:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_src71.csv
[Thu Jan 26 18:45:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_src71_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_src71.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 26 18:45:16 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src71.ximg exists
[Thu Jan 26 18:45:16 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src71_1.ximg exists
[Thu Jan 26 18:45:16 2012] Fit fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src71 appears to have run properly
[Fri Jan 27 00:06:48 2012] Warning, spatial fit 71 centroid is now closest to src. 49
[Fri Jan 27 00:06:48 2012] Vigneting correction estimate = 1.000000
[Fri Jan 27 00:06:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan 27 00:06:48 2012] Assessing source extent using major axis lower bound
[Fri Jan 27 00:06:48 2012] Source does appear to be extended
[Fri Jan 27 00:06:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jan 28 04:46:23 2012] XMMSAS src. selection expression = ellipse(21182.283400, 29967.019600, 352.073410, 352.073410, 0.000000, X, Y)
[Sat Jan 28 04:46:23 2012] Writing source region out to fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src99_src.reg
[Sat Jan 28 04:46:23 2012] Extracting stamp from image fullrun_mos1_xmm0112570101_pi300-10000_cl_sm2.00.img.gz, (224, 325) - (264, 365)
[Sat Jan 28 04:46:23 2012] XMMSAS bgd. selection expression = annulus(21182.283400, 29967.019600, 586.789017, 1173.578034, X, Y) && !ellipse(22507.490600, 28642.546000, 434.552013, 392.565611, 98.079968, X, Y) && !ellipse(22191.156433, 29983.603699, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20149.724319, 30585.923645, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jan 28 04:46:23 2012] Writing fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src99.gif
[Sat Jan 28 05:47:24 2012] Mean detx,y = (761.18, -7240.63) 
[Sat Jan 28 05:47:25 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jan 28 05:47:39 2012] Binned source spectrum to 10 counts/bin
[Sat Jan 28 05:47:40 2012] Setting source spectrum file to fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src99_src_b10.pi.gz
[Sat Jan 28 05:47:40 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src99_bgd.pi.gz
[Sat Jan 28 13:51:44 2012] Updating aperture counts using extracted products
[Sat Jan 28 13:51:44 2012] Error reading totcts from fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src99_src_b10.pi.gz
[Sat Jan 28 13:51:46 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jan 28 13:51:46 2012] Using photon index=1.80, rate=0.00195, arf fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src99.arf
[Sat Jan 28 13:51:46 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jan 28 13:51:46 2012] Updating source flux to 3.5e-14
[Sat Jan 28 13:51:56 2012] Flag c found in src. 99 procflags, skipping spectral fitting