[Wed Jan 25 01:02:50 2012] Detection parameters:
  Position = (356.1, 265.3) = 0 42 28.25 41 12 22.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 4783.4 +/- 84.1
  Background counts = 62.1
  Rate = 0.09 +/- 0.002

[Wed Jan 25 01:02:54 2012] Off-axis axis estimate = 4.82'
[Wed Jan 25 09:18:43 2012] Using EEF radius (= 8.84 ")to estimate initial spatial extent for simple fitting
[Wed Jan 25 09:18:43 2012] Initial guess for spatial extent in simple fitting = 8.84"
[Wed Jan 25 09:18:43 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.975
[Wed Jan 25 09:18:43 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 8.84"
[Wed Jan 25 16:12:52 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_src9.ximg exists
[Wed Jan 25 16:12:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_src9.csv
[Wed Jan 25 16:12:52 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_src9_1.ximg exists
[Wed Jan 25 16:12:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_src9.csv
[Wed Jan 25 16:12:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan 25 16:12:54 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Wed Jan 25 16:12:54 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Wed Jan 25 16:12:54 2012] Fit fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Wed Jan 25 22:38:36 2012] Warning, spatial fit 9 centroid is now closest to src. 56
[Wed Jan 25 22:38:36 2012] Vigneting correction estimate = 1.000000
[Wed Jan 25 22:38:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 25 22:38:36 2012] Assessing source extent using major
[Wed Jan 25 22:38:36 2012] Source does appear to be extended
[Wed Jan 25 22:38:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan 26 13:17:26 2012] Using EEF radius (= 8.84 ")to estimate initial spatial extent for simple fitting
[Thu Jan 26 13:17:26 2012] Initial guess for spatial extent in simple fitting = 8.84"
[Thu Jan 26 13:17:26 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.975
[Thu Jan 26 13:17:26 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 8.84"
[Thu Jan 26 18:45:13 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_src9.ximg exists
[Thu Jan 26 18:45:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_src9.csv
[Thu Jan 26 18:45:13 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_src9_1.ximg exists
[Thu Jan 26 18:45:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_src9.csv
[Thu Jan 26 18:45:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 26 18:45:15 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Thu Jan 26 18:45:15 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Thu Jan 26 18:45:15 2012] Fit fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Fri Jan 27 00:06:48 2012] Spatial fit model total counts = 4878.620000, observed total counts = 4879.000000
[Fri Jan 27 00:06:48 2012] Offset between fit and detection position for source 8 = 0.164701 pixels
[Fri Jan 27 00:06:48 2012] 4900.760000 total counts/ 1640.690000 bgd. counts: snr = 80.484761
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.164701 pixels
  Position = (356.1, 265.5) = 0 42 28.25 41 12 22.1
  Extent = 5.2 (5.0-5.3)", rotation angle = 0
  Source counts = 3260.1 +/- 70.0
  Background counts = 1640.7
  Rate = 0.05 +/- 0.001
[Fri Jan 27 00:06:48 2012] Vigneting correction estimate = 1.000000
[Fri Jan 27 00:06:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan 27 00:06:48 2012] Assessing source extent using major axis lower bound
[Fri Jan 27 00:06:48 2012] Source does appear to be extended
[Fri Jan 27 00:06:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jan 28 04:46:20 2012] Counts = 3260.070000, rescaling region sizes by 2.000000
[Sat Jan 28 04:46:20 2012] XMMSAS src. selection expression = ellipse(30929.529920, 23045.661800, 620.899218, 620.899218, 0.000000, X, Y)
[Sat Jan 28 04:46:20 2012] Writing source region out to fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src8_src.reg
[Sat Jan 28 04:46:20 2012] Extracting stamp from image fullrun_mos1_xmm0112570101_pi300-10000_cl_sm2.00.img.gz, (320, 230) - (392, 301)
[Sat Jan 28 04:46:20 2012] XMMSAS bgd. selection expression = annulus(30929.529920, 23045.661800, 2069.664060, 4139.328119, X, Y) && !ellipse(28609.344200, 27458.497200, 1301.052037, 1232.880035, 356.900530, X, Y) && !ellipse(32138.220000, 26890.710000, 319.088809, 319.088809, 0.000000, X, Y) && !ellipse(26390.977000, 26642.133540, 550.903216, 394.977611, 118.958700, X, Y) && !ellipse(27288.310883, 27626.784637, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33110.533100, 25020.709000, 372.716011, 372.716011, 0.000000, X, Y) && !ellipse(27738.710000, 27623.310000, 3524.496101, 3229.272093, 6.416000, X, Y) && !ellipse(30058.035380, 24067.627800, 434.671213, 434.671213, 0.000000, X, Y) && !ellipse(33897.671380, 23295.366600, 532.771215, 532.771215, 0.000000, X, Y) && !ellipse(27193.579600, 22147.205000, 374.391211, 374.391211, 0.000000, X, Y) && !ellipse(32475.675262, 27418.192261, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30952.021200, 20193.413000, 419.644012, 419.644012, 0.000000, X, Y) && !ellipse(32087.496000, 24577.481000, 1420.936041, 1420.936041, 0.000000, X, Y) && !ellipse(27717.122000, 27128.236000, 1174.832034, 926.248027, 47.383900, X, Y) && !ellipse(27759.407200, 25890.182600, 295.434409, 295.434409, 0.000000, X, Y) && !ellipse(31639.616400, 24594.021000, 275.948008, 275.948008, 0.000000, X, Y) && !ellipse(28398.683960, 25548.087860, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27114.337433, 26752.366669, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29676.342468, 27740.319000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32447.139008, 25359.209076, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33081.584808, 23067.860382, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34684.986206, 21189.630264, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28144.124600, 24333.061400, 343.597610, 343.597610, 0.000000, X, Y) && !ellipse(27544.730200, 24188.249600, 257.124807, 257.124807, 0.000000, X, Y) && !ellipse(34981.675110, 26404.658722, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35602.702393, 20720.610046, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27155.068237, 25116.627014, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29148.448303, 24534.010040, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29754.429535, 25886.312042, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34856.649780, 23533.812714, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26040.712616, 21591.496826, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31012.467377, 26834.385834, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30300.510651, 26230.735718, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jan 28 04:46:20 2012] Writing fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src8.gif
[Sat Jan 28 04:53:29 2012] Mean detx,y = (-2369.31, 4320.96) 
[Sat Jan 28 04:53:30 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jan 28 04:54:19 2012] Binned source spectrum to 10 counts/bin
[Sat Jan 28 04:54:19 2012] Setting source spectrum file to fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Sat Jan 28 04:54:19 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Sat Jan 28 13:51:43 2012] Updating aperture counts using extracted products
[Sat Jan 28 13:51:43 2012] Error reading totcts from fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Sat Jan 28 13:51:45 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jan 28 13:51:45 2012] Using photon index=1.80, rate=0.0513, arf fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src8.arf
[Sat Jan 28 13:51:45 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jan 28 13:51:45 2012] Updating source flux to 5.9e-13