[Wed Jan 25 01:02:52 2012] Detection parameters:
  Position = (353.3, 495.8) = 0 42 29.25 41 29 4.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 198.4 +/- 18.1
  Background counts = 17.6
  Rate = 0.003 +/- 0.0003

[Wed Jan 25 01:02:54 2012] Off-axis axis estimate = 14.85'
[Wed Jan 25 09:18:43 2012] Using EEF radius (= 13.85 ")to estimate initial spatial extent for simple fitting
[Wed Jan 25 09:18:43 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jan 25 09:18:43 2012] Initial guess for spatial extent in simple fitting = 13.85"
[Wed Jan 25 09:18:43 2012] source mask rpix=3.2, npix_max = 54, mask sum = 49, frac = 0.902
[Wed Jan 25 09:18:43 2012] Giving source the simple spatial ID 88 for pass 0, mean size = 13.85"
[Wed Jan 25 16:12:54 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_src88.ximg exists
[Wed Jan 25 16:12:54 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_src88_1.ximg exists
[Wed Jan 25 16:12:54 2012] Fit fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_src88 appears to have run properly
[Wed Jan 25 16:12:56 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src88.ximg exists
[Wed Jan 25 16:12:56 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src88_1.ximg exists
[Wed Jan 25 16:12:56 2012] Fit fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src88 appears to have run properly
[Wed Jan 25 22:38:36 2012] Warning: source 88 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 78 at 18.437626 pixels away
[Wed Jan 25 22:38:36 2012] Vigneting correction estimate = 1.000000
[Wed Jan 25 22:38:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 25 22:38:36 2012] Assessing source extent using major
[Wed Jan 25 22:38:36 2012] Source does appear to be extended
[Wed Jan 25 22:38:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan 26 13:17:26 2012] Using EEF radius (= 13.85 ")to estimate initial spatial extent for simple fitting
[Thu Jan 26 13:17:26 2012] Initial guess for spatial extent in simple fitting = 13.85"
[Thu Jan 26 13:17:26 2012] source mask rpix=3.2, npix_max = 54, mask sum = 49, frac = 0.902
[Thu Jan 26 13:17:26 2012] Giving source the simple spatial ID 87 for pass 1, mean size = 13.85"
[Thu Jan 26 18:45:14 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_src87.ximg exists
[Thu Jan 26 18:45:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_src87.csv
[Thu Jan 26 18:45:15 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_src87_1.ximg exists
[Thu Jan 26 18:45:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_src87.csv
[Thu Jan 26 18:45:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_src87_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_src87.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 26 18:45:16 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src87.ximg exists
[Thu Jan 26 18:45:16 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src87_1.ximg exists
[Thu Jan 26 18:45:16 2012] Fit fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src87 appears to have run properly
[Fri Jan 27 00:06:48 2012] Warning: source 87 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 78 at 16.961327 pixels away
[Fri Jan 27 00:06:48 2012] Vigneting correction estimate = 1.000000
[Fri Jan 27 00:06:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan 27 00:06:48 2012] Assessing source extent using major
[Fri Jan 27 00:06:48 2012] Source does appear to be extended
[Fri Jan 27 00:06:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jan 28 04:46:24 2012] XMMSAS src. selection expression = ellipse(30684.842072, 43083.268677, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jan 28 04:46:24 2012] Writing source region out to fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src78_src.reg
[Sat Jan 28 04:46:24 2012] Extracting stamp from image fullrun_mos1_xmm0112570101_pi300-10000_cl_sm2.00.img.gz, (316, 458) - (391, 533)
[Sat Jan 28 04:46:24 2012] XMMSAS bgd. selection expression = annulus(30684.842072, 43083.268677, 1087.500000, 2175.000000, X, Y) && !ellipse(32710.148865, 40229.433441, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jan 28 04:46:24 2012] Writing fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src78.gif
[Sat Jan 28 05:52:09 2012] Mean detx,y = (16336.96, -2790.77) 
[Sat Jan 28 05:52:10 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jan 28 05:52:21 2012] Binned source spectrum to 10 counts/bin
[Sat Jan 28 05:52:21 2012] Setting source spectrum file to fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src78_src_b10.pi.gz
[Sat Jan 28 05:52:21 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src78_bgd.pi.gz
[Sat Jan 28 08:32:25 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jan 28 08:32:25 2012] rmf not generated due to insufficient counts
[Sat Jan 28 13:51:44 2012] Updating aperture counts using extracted products
[Sat Jan 28 13:51:44 2012] Error reading totcts from fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src78_src_b10.pi.gz
[Sat Jan 28 13:51:47 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jan 28 13:51:47 2012] Using photon index=1.80, rate=0.00312, arf fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src78.arf
[Sat Jan 28 13:51:47 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jan 28 13:51:47 2012] Updating source flux to 8.8e-14
[Sat Jan 28 13:51:56 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting