[Wed Jan 25 01:02:52 2012] Detection parameters:
  Position = (399.2, 244.1) = 0 42 11.63 41 10 48.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 383.7 +/- 25.1
  Background counts = 34.4
  Rate = 0.009 +/- 0.0006

[Wed Jan 25 01:02:54 2012] Off-axis axis estimate = 8.30'
[Wed Jan 25 09:18:43 2012] Using EEF radius (= 10.58 ")to estimate initial spatial extent for simple fitting
[Wed Jan 25 09:18:43 2012] Initial guess for spatial extent in simple fitting = 10.58"
[Wed Jan 25 09:18:43 2012] source mask rpix=2.4, npix_max = 34, mask sum = 34, frac = 0.989
[Wed Jan 25 09:18:43 2012] Giving source the simple spatial ID 56 for pass 0, mean size = 10.58"
[Wed Jan 25 16:12:53 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_src56.ximg exists
[Wed Jan 25 16:12:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_src56.csv
[Wed Jan 25 16:12:53 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_src56_1.ximg exists
[Wed Jan 25 16:12:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_src56.csv
[Wed Jan 25 16:12:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_src56_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_src56.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan 25 16:12:55 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src56.ximg exists
[Wed Jan 25 16:12:55 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src56_1.ximg exists
[Wed Jan 25 16:12:55 2012] Fit fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src56 appears to have run properly
[Wed Jan 25 22:38:36 2012] Warning: source 56 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 75 at 13.322884 pixels away
[Wed Jan 25 22:38:36 2012] Source 75 is offset by -0.641630 and -6.006457 pixels which is larger than
2 X fitted extent = 1.265366 x 1.265366, not incorporating fit results
[Wed Jan 25 22:38:36 2012] Vigneting correction estimate = 1.000000
[Wed Jan 25 22:38:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 25 22:38:36 2012] Assessing source extent using major
[Wed Jan 25 22:38:36 2012] Source does appear to be extended
[Wed Jan 25 22:38:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan 26 13:17:26 2012] Using EEF radius (= 10.58 ")to estimate initial spatial extent for simple fitting
[Thu Jan 26 13:17:26 2012] Initial guess for spatial extent in simple fitting = 10.58"
[Thu Jan 26 13:17:26 2012] source mask rpix=2.4, npix_max = 34, mask sum = 34, frac = 0.989
[Thu Jan 26 13:17:26 2012] Giving source the simple spatial ID 55 for pass 1, mean size = 10.58"
[Thu Jan 26 18:45:14 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_src55.ximg exists
[Thu Jan 26 18:45:14 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_src55_1.ximg exists
[Thu Jan 26 18:45:14 2012] Fit fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_src55 appears to have run properly
[Thu Jan 26 18:45:16 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src55.ximg exists
[Thu Jan 26 18:45:16 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src55_1.ximg exists
[Thu Jan 26 18:45:16 2012] Fit fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src55 appears to have run properly
[Fri Jan 27 00:06:48 2012] Warning: source 55 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 75 at 14.237903 pixels away
[Fri Jan 27 00:06:48 2012] Source 75 is offset by -0.641630 and -6.006457 pixels which is larger than
2 X fitted extent = 1.265366 x 1.265366, not incorporating fit results
[Fri Jan 27 00:06:48 2012] Vigneting correction estimate = 1.000000
[Fri Jan 27 00:06:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan 27 00:06:48 2012] Assessing source extent using major
[Fri Jan 27 00:06:48 2012] Source does appear to be extended
[Fri Jan 27 00:06:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jan 28 04:46:23 2012] XMMSAS src. selection expression = ellipse(34684.986206, 21189.630264, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jan 28 04:46:23 2012] Writing source region out to fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src75_src.reg
[Sat Jan 28 04:46:23 2012] Extracting stamp from image fullrun_mos1_xmm0112570101_pi300-10000_cl_sm2.00.img.gz, (362, 207) - (437, 282)
[Sat Jan 28 04:46:23 2012] XMMSAS bgd. selection expression = annulus(34684.986206, 21189.630264, 1087.500000, 2175.000000, X, Y) && !ellipse(33897.671380, 23295.366600, 532.771215, 532.771215, 0.000000, X, Y) && !ellipse(32087.496000, 24577.481000, 1420.936041, 1420.936041, 0.000000, X, Y) && !ellipse(33081.584808, 23067.860382, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35602.702393, 20720.610046, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34856.649780, 23533.812714, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jan 28 04:46:23 2012] Writing fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src75.gif
[Sat Jan 28 05:41:59 2012] Mean detx,y = (-2798.94, 8480.72) 
[Sat Jan 28 05:42:00 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jan 28 05:42:13 2012] Binned source spectrum to 10 counts/bin
[Sat Jan 28 05:42:13 2012] Setting source spectrum file to fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src75_src_b10.pi.gz
[Sat Jan 28 05:42:13 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src75_bgd.pi.gz
[Sat Jan 28 07:55:45 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jan 28 07:55:45 2012] rmf not generated due to insufficient counts
[Sat Jan 28 13:51:44 2012] Updating aperture counts using extracted products
[Sat Jan 28 13:51:44 2012] Error reading totcts from fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src75_src_b10.pi.gz
[Sat Jan 28 13:51:46 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jan 28 13:51:46 2012] Using photon index=1.80, rate=0.00941, arf fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src75.arf
[Sat Jan 28 13:51:46 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jan 28 13:51:46 2012] Updating source flux to 1.3e-13
[Sat Jan 28 13:51:56 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting