[Wed Jan 25 01:02:52 2012] Detection parameters:
  Position = (373.5, 292.0) = 0 42 21.52 41 14 18.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 561.3 +/- 32.4
  Background counts = 59.6
  Rate = 0.01 +/- 0.0006

[Wed Jan 25 01:02:54 2012] Off-axis axis estimate = 5.46'
[Wed Jan 25 09:18:43 2012] Using EEF radius (= 9.16 ")to estimate initial spatial extent for simple fitting
[Wed Jan 25 09:18:43 2012] Initial guess for spatial extent in simple fitting = 9.16"
[Wed Jan 25 09:18:43 2012] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.105
[Wed Jan 25 09:18:43 2012] Giving source the simple spatial ID 55 for pass 0, mean size = 9.16"
[Wed Jan 25 16:12:53 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_src55.ximg exists
[Wed Jan 25 16:12:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_src55.csv
[Wed Jan 25 16:12:53 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_src55_1.ximg exists
[Wed Jan 25 16:12:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_src55.csv
[Wed Jan 25 16:12:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_src55_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan 25 16:12:55 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src55.ximg exists
[Wed Jan 25 16:12:55 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src55_1.ximg exists
[Wed Jan 25 16:12:55 2012] Fit fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src55 appears to have run properly
[Wed Jan 25 22:38:36 2012] Source 70 is offset by -7.907827 and 3.804702 pixels which is larger than
2 X fitted extent = 2.569127 x 2.569127, not incorporating fit results
[Wed Jan 25 22:38:36 2012] Vigneting correction estimate = 1.000000
[Wed Jan 25 22:38:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 25 22:38:36 2012] Assessing source extent using major
[Wed Jan 25 22:38:36 2012] Source does appear to be extended
[Wed Jan 25 22:38:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 25 22:38:36 2012] Source is confused with source 31
[Thu Jan 26 13:17:26 2012] Using EEF radius (= 9.16 ")to estimate initial spatial extent for simple fitting
[Thu Jan 26 13:17:26 2012] Initial guess for spatial extent in simple fitting = 9.16"
[Thu Jan 26 13:17:26 2012] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.105
[Thu Jan 26 13:17:26 2012] Giving source the simple spatial ID 54 for pass 1, mean size = 9.16"
[Thu Jan 26 18:45:14 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_src54.ximg exists
[Thu Jan 26 18:45:14 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_src54_1.ximg exists
[Thu Jan 26 18:45:14 2012] Fit fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_src54 appears to have run properly
[Thu Jan 26 18:45:16 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src54.ximg exists
[Thu Jan 26 18:45:16 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src54_1.ximg exists
[Thu Jan 26 18:45:16 2012] Fit fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src54 appears to have run properly
[Fri Jan 27 00:06:48 2012] Source 70 is offset by -7.862770 and 3.942771 pixels which is larger than
2 X fitted extent = 2.043669 x 2.043669, not incorporating fit results
[Fri Jan 27 00:06:48 2012] Source 70 is offset by -7.863437 and 3.806196 pixels which is larger than
2 X fitted extent = 2.571835 x 2.571835, not incorporating fit results
[Fri Jan 27 00:06:48 2012] Vigneting correction estimate = 1.000000
[Fri Jan 27 00:06:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan 27 00:06:48 2012] Assessing source extent using major
[Fri Jan 27 00:06:48 2012] Source does appear to be extended
[Fri Jan 27 00:06:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jan 28 04:46:23 2012] XMMSAS src. selection expression = ellipse(32447.139008, 25359.209076, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jan 28 04:46:23 2012] Writing source region out to fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src70_src.reg
[Sat Jan 28 04:46:23 2012] Extracting stamp from image fullrun_mos1_xmm0112570101_pi300-10000_cl_sm2.00.img.gz, (336, 255) - (411, 330)
[Sat Jan 28 04:46:23 2012] XMMSAS bgd. selection expression = annulus(32447.139008, 25359.209076, 1087.500000, 2175.000000, X, Y) && !ellipse(32138.220000, 26890.710000, 319.088809, 319.088809, 0.000000, X, Y) && !ellipse(30268.520000, 27827.378200, 491.272814, 428.071212, 90.000000, X, Y) && !ellipse(30929.529920, 23045.661800, 413.932812, 413.932812, 0.000000, X, Y) && !ellipse(33110.533100, 25020.709000, 372.716011, 372.716011, 0.000000, X, Y) && !ellipse(27738.710000, 27623.310000, 3524.496101, 3229.272093, 6.416000, X, Y) && !ellipse(30058.035380, 24067.627800, 434.671213, 434.671213, 0.000000, X, Y) && !ellipse(33897.671380, 23295.366600, 532.771215, 532.771215, 0.000000, X, Y) && !ellipse(32475.675262, 27418.192261, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32087.496000, 24577.481000, 1420.936041, 1420.936041, 0.000000, X, Y) && !ellipse(31639.616400, 24594.021000, 275.948008, 275.948008, 0.000000, X, Y) && !ellipse(29676.342468, 27740.319000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33081.584808, 23067.860382, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34981.675110, 26404.658722, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34519.818400, 28158.181200, 664.720819, 664.720819, 0.000000, X, Y) && !ellipse(29754.429535, 25886.312042, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34856.649780, 23533.812714, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31012.467377, 26834.385834, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30300.510651, 26230.735718, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jan 28 04:46:23 2012] Writing fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src70.gif
[Sat Jan 28 05:41:05 2012] Mean detx,y = (263.92, 5035.49) 
[Sat Jan 28 05:41:06 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jan 28 05:41:23 2012] Binned source spectrum to 10 counts/bin
[Sat Jan 28 05:41:23 2012] Setting source spectrum file to fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src70_src_b10.pi.gz
[Sat Jan 28 05:41:23 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src70_bgd.pi.gz
[Sat Jan 28 07:55:23 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jan 28 07:55:23 2012] rmf not generated due to insufficient counts
[Sat Jan 28 13:51:44 2012] Updating aperture counts using extracted products
[Sat Jan 28 13:51:44 2012] Error reading totcts from fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src70_src_b10.pi.gz
[Sat Jan 28 13:51:46 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jan 28 13:51:46 2012] Using photon index=1.80, rate=0.00993, arf fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src70.arf
[Sat Jan 28 13:51:46 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jan 28 13:51:46 2012] Updating source flux to 1.1e-13
[Sat Jan 28 13:51:56 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting