[Wed Jan 25 01:02:50 2012] Detection parameters:
  Position = (307.4, 321.8) = 0 42 47.00 41 16 27.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 9545.3 +/- 118.0
  Background counts = 85.7
  Rate = 0.2 +/- 0.002

[Wed Jan 25 01:02:54 2012] Off-axis axis estimate = 1.81'
[Wed Jan 25 09:18:43 2012] Using EEF radius (= 7.34 ")to estimate initial spatial extent for simple fitting
[Wed Jan 25 09:18:43 2012] Initial guess for spatial extent in simple fitting = 7.34"
[Wed Jan 25 09:18:43 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.046
[Wed Jan 25 09:18:43 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 7.34"
[Wed Jan 25 16:12:52 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_src3.ximg exists
[Wed Jan 25 16:12:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_src3.csv
[Wed Jan 25 16:12:52 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_src3_1.ximg exists
[Wed Jan 25 16:12:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_src3.csv
[Wed Jan 25 16:12:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan 25 16:12:54 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Wed Jan 25 16:12:54 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Wed Jan 25 16:12:54 2012] Fit fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Wed Jan 25 22:38:36 2012] Spatial fit model total counts = 15427.800000, observed total counts = 15433.000000
[Wed Jan 25 22:38:36 2012] Offset between fit and detection position for source 7 = 0.374778 pixels
[Wed Jan 25 22:38:36 2012] 15585.020000 total counts/ 9956.100000 bgd. counts: snr = 56.413163
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.374778 pixels
  Position = (307.3, 321.4) = 0 42 47.05 41 16 25.7
  Extent = 6.0 (5.8-6.2)", rotation angle = 0
  Source counts = 5628.9 +/- 124.8
  Background counts = 9956.1
  Rate = 0.09 +/- 0.002
[Wed Jan 25 22:38:36 2012] Vigneting correction estimate = 1.000000
[Wed Jan 25 22:38:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 25 22:38:36 2012] Assessing source extent using major axis lower bound
[Wed Jan 25 22:38:36 2012] Source does appear to be extended
[Wed Jan 25 22:38:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan 26 13:17:26 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jan 26 13:17:26 2012] Initial guess for spatial extent in simple fitting = 5.99"
[Thu Jan 26 13:17:26 2012] source mask rpix=1.4, npix_max = 14, mask sum = 12, frac = 0.851
[Thu Jan 26 13:17:26 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 5.99"
[Thu Jan 26 18:45:13 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_src3.ximg exists
[Thu Jan 26 18:45:13 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_src3_1.ximg exists
[Thu Jan 26 18:45:13 2012] Fit fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_src3 appears to have run properly
[Thu Jan 26 18:45:15 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Thu Jan 26 18:45:15 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Thu Jan 26 18:45:15 2012] Fit fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Fri Jan 27 00:06:48 2012] Spatial fit model total counts = 15434.200000, observed total counts = 15433.000000
[Fri Jan 27 00:06:48 2012] Offset between fit and detection position for source 7 = 0.002273 pixels
[Fri Jan 27 00:06:48 2012] 15595.050000 total counts/ 9977.650000 bgd. counts: snr = 56.236880
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.002273 pixels
  Position = (307.3, 321.4) = 0 42 47.05 41 16 25.7
  Extent = 6.0 (5.8-6.2)", rotation angle = 0
  Source counts = 5617.4 +/- 124.9
  Background counts = 9977.6
  Rate = 0.09 +/- 0.002
[Fri Jan 27 00:06:48 2012] Vigneting correction estimate = 1.000000
[Fri Jan 27 00:06:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan 27 00:06:48 2012] Assessing source extent using major axis lower bound
[Fri Jan 27 00:06:48 2012] Source does appear to be extended
[Fri Jan 27 00:06:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jan 28 04:46:19 2012] Counts = 5617.400000, rescaling region sizes by 2.000000
[Sat Jan 28 04:46:19 2012] XMMSAS src. selection expression = ellipse(26685.905400, 27915.396400, 720.462021, 720.462021, 0.000000, X, Y)
[Sat Jan 28 04:46:19 2012] Writing source region out to fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src7_src.reg
[Sat Jan 28 04:46:19 2012] Extracting stamp from image fullrun_mos1_xmm0112570101_pi300-10000_cl_sm2.00.img.gz, (266, 280) - (349, 363)
[Sat Jan 28 04:46:19 2012] XMMSAS bgd. selection expression = annulus(26685.905400, 27915.396400, 2401.540069, 4803.080138, X, Y) && !ellipse(28609.344200, 27458.497200, 1301.052037, 1232.880035, 356.900530, X, Y) && !ellipse(26390.977000, 26642.133540, 550.903216, 394.977611, 118.958700, X, Y) && !ellipse(23093.036412, 26688.566200, 452.647213, 452.647213, 0.000000, X, Y) && !ellipse(21386.017471, 26032.965240, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24924.345900, 27454.583600, 339.450410, 339.450410, 0.000000, X, Y) && !ellipse(30268.520000, 27827.378200, 491.272814, 428.071212, 90.000000, X, Y) && !ellipse(30929.529920, 23045.661800, 413.932812, 413.932812, 0.000000, X, Y) && !ellipse(22507.490600, 28642.546000, 434.552013, 392.565611, 98.079968, X, Y) && !ellipse(25473.484818, 26988.460634, 359.786971, 325.000892, 9.156307, X, Y) && !ellipse(25474.320600, 30868.774600, 385.363211, 385.363211, 0.000000, X, Y) && !ellipse(27288.310883, 27626.784637, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23814.979400, 27509.894800, 354.992810, 354.992810, 0.000000, X, Y) && !ellipse(27738.710000, 27623.310000, 3524.496101, 3229.272093, 6.416000, X, Y) && !ellipse(23867.650140, 31371.159800, 406.206412, 406.206412, 0.000000, X, Y) && !ellipse(30058.035380, 24067.627800, 434.671213, 434.671213, 0.000000, X, Y) && !ellipse(22915.430800, 29889.633200, 383.604011, 383.604011, 0.000000, X, Y) && !ellipse(32087.496000, 24577.481000, 1420.936041, 1420.936041, 0.000000, X, Y) && !ellipse(27717.122000, 27128.236000, 1174.832034, 926.248027, 47.383900, X, Y) && !ellipse(30267.409200, 31762.047800, 388.977611, 388.977611, 0.000000, X, Y) && !ellipse(27759.407200, 25890.182600, 295.434409, 295.434409, 0.000000, X, Y) && !ellipse(31639.616400, 24594.021000, 275.948008, 275.948008, 0.000000, X, Y) && !ellipse(22191.156433, 29983.603699, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28398.683960, 25548.087860, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27114.337433, 26752.366669, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29676.342468, 27740.319000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24852.589661, 30494.306549, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26206.931800, 30108.992000, 357.876010, 343.552810, 184.530000, X, Y) && !ellipse(27181.828488, 29376.430400, 322.006409, 322.006409, 0.000000, X, Y) && !ellipse(31430.715520, 31285.005200, 378.335211, 378.335211, 0.000000, X, Y) && !ellipse(24172.957916, 26766.002899, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28248.032288, 30412.027191, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21811.728851, 23552.246582, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29371.143700, 32298.739800, 384.794411, 310.752009, 23.747500, X, Y) && !ellipse(28144.124600, 24333.061400, 343.597610, 343.597610, 0.000000, X, Y) && !ellipse(28389.744476, 28773.497101, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29154.031830, 28505.336487, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27544.730200, 24188.249600, 257.124807, 257.124807, 0.000000, X, Y) && !ellipse(25462.189697, 28563.733856, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22086.194400, 32613.082400, 1220.296035, 523.360015, 297.007988, X, Y) && !ellipse(27888.482910, 28960.873138, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26294.801575, 29505.841797, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25678.625600, 23826.063000, 376.060811, 376.060811, 0.000000, X, Y) && !ellipse(27155.068237, 25116.627014, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29148.448303, 24534.010040, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25550.567657, 25625.659851, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28746.160000, 29475.792000, 1280.584037, 1280.584037, 0.000000, X, Y) && !ellipse(25876.084869, 31475.703613, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(23527.530914, 24822.508179, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28294.131561, 29250.223541, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29754.429535, 25886.312042, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23887.797150, 23423.894501, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24575.059448, 29092.788269, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23373.666656, 29193.676727, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31012.467377, 26834.385834, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30300.510651, 26230.735718, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jan 28 04:46:19 2012] Writing fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src7.gif
[Sat Jan 28 04:49:50 2012] Mean detx,y = (722.29, -1229.78) 
[Sat Jan 28 04:49:51 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jan 28 04:50:02 2012] Binned source spectrum to 10 counts/bin
[Sat Jan 28 04:50:02 2012] Setting source spectrum file to fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Sat Jan 28 04:50:02 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Sat Jan 28 13:51:43 2012] Updating aperture counts using extracted products
[Sat Jan 28 13:51:43 2012] Error reading totcts from fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Sat Jan 28 13:51:45 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jan 28 13:51:45 2012] Using photon index=1.80, rate=0.0883, arf fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src7.arf
[Sat Jan 28 13:51:45 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jan 28 13:51:45 2012] Updating source flux to 8.5e-13