[Wed Jan 25 01:02:52 2012] Detection parameters:
  Position = (263.0, 315.8) = 0 43 4.14 41 16 1.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 511.7 +/- 31.7
  Background counts = 62.0
  Rate = 0.01 +/- 0.0006

[Wed Jan 25 01:02:54 2012] Off-axis axis estimate = 2.86'
[Wed Jan 25 09:18:43 2012] Using EEF radius (= 7.86 ")to estimate initial spatial extent for simple fitting
[Wed Jan 25 09:18:43 2012] Initial guess for spatial extent in simple fitting = 7.86"
[Wed Jan 25 09:18:43 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.940
[Wed Jan 25 09:18:43 2012] Giving source the simple spatial ID 53 for pass 0, mean size = 7.86"
[Wed Jan 25 16:12:53 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_src53.ximg exists
[Wed Jan 25 16:12:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_src53.csv
[Wed Jan 25 16:12:53 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_src53_1.ximg exists
[Wed Jan 25 16:12:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_src53.csv
[Wed Jan 25 16:12:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_src53_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan 25 16:12:55 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src53.ximg exists
[Wed Jan 25 16:12:55 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src53_1.ximg exists
[Wed Jan 25 16:12:55 2012] Fit fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src53 appears to have run properly
[Wed Jan 25 22:38:36 2012] Source 68 is offset by -2.625924 and 6.012204 pixels which is larger than
2 X fitted extent = 2.568395 x 2.568395, not incorporating fit results
[Wed Jan 25 22:38:36 2012] Spatial fit model total counts = 1800.790000, observed total counts = 1853.000000
[Wed Jan 25 22:38:36 2012] Offset between fit and detection position for source 68 = 7.681005 pixels
[Wed Jan 25 22:38:36 2012] Warning, changing simple spatial fit ID from 53 to 93
[Wed Jan 25 22:38:36 2012] 1804.162200 total counts/ 1762.650000 bgd. counts: snr = 0.988764
Spatial fit parameters:
  Offset between fit and detection position for source 68 = 7.681005 pixels
  Position = (270.6, 316.9) = 0 43 1.21 41 16 6.1
  Extent = 24.1" x 9.1", rotation angle = 2
  Source counts = 41.5 +/- 42.5
  Background counts = 1762.7
  Rate = 0.0007 +/- 0.0007
  Deleting source due to low Poisson probability