[Wed Jan 25 01:02:52 2012] Detection parameters:
  Position = (478.1, 360.2) = 0 41 41.10 41 19 16.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 174.0 +/- 18.4
  Background counts = 14.6
  Rate = 0.003 +/- 0.0003

[Wed Jan 25 01:02:54 2012] Off-axis axis estimate = 13.77'
[Wed Jan 25 09:18:43 2012] Using EEF radius (= 13.31 ")to estimate initial spatial extent for simple fitting
[Wed Jan 25 09:18:43 2012] Initial guess for spatial extent in simple fitting = 13.31"
[Wed Jan 25 09:18:43 2012] source mask rpix=3.1, npix_max = 50, mask sum = 40, frac = 0.789
[Wed Jan 25 09:18:43 2012] Giving source the simple spatial ID 92 for pass 0, mean size = 13.31"
[Wed Jan 25 16:12:54 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_src92.ximg exists
[Wed Jan 25 16:12:54 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_src92_1.ximg exists
[Wed Jan 25 16:12:54 2012] Fit fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_src92 appears to have run properly
[Wed Jan 25 16:12:56 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src92.ximg exists
[Wed Jan 25 16:12:56 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src92_1.ximg exists
[Wed Jan 25 16:12:56 2012] Fit fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src92 appears to have run properly
[Wed Jan 25 22:38:36 2012] Warning, spatial fit 92 centroid is now closest to src. 92
[Wed Jan 25 22:38:36 2012] Vigneting correction estimate = 1.000000
[Wed Jan 25 22:38:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 25 22:38:36 2012] Assessing source extent using major
[Wed Jan 25 22:38:36 2012] Source does appear to be extended
[Wed Jan 25 22:38:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan 26 13:17:26 2012] Using EEF radius (= 13.31 ")to estimate initial spatial extent for simple fitting
[Thu Jan 26 13:17:26 2012] Initial guess for spatial extent in simple fitting = 13.31"
[Thu Jan 26 13:17:26 2012] source mask rpix=3.1, npix_max = 50, mask sum = 40, frac = 0.789
[Thu Jan 26 13:17:26 2012] Giving source the simple spatial ID 91 for pass 1, mean size = 13.31"
[Thu Jan 26 18:45:15 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_src91.ximg exists
[Thu Jan 26 18:45:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_src91.csv
[Thu Jan 26 18:45:15 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_src91_1.ximg exists
[Thu Jan 26 18:45:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_src91.csv
[Thu Jan 26 18:45:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_src91_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_src91.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 26 18:45:16 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src91.ximg exists
[Thu Jan 26 18:45:16 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src91_1.ximg exists
[Thu Jan 26 18:45:16 2012] Fit fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src91 appears to have run properly
[Fri Jan 27 00:06:48 2012] Warning: source 91 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 65 at 17.871658 pixels away
[Fri Jan 27 00:06:48 2012] Vigneting correction estimate = 1.000000
[Fri Jan 27 00:06:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan 27 00:06:48 2012] Assessing source extent using major
[Fri Jan 27 00:06:48 2012] Source does appear to be extended
[Fri Jan 27 00:06:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jan 28 04:46:24 2012] XMMSAS src. selection expression = ellipse(41544.012787, 31289.482513, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jan 28 04:46:24 2012] Writing source region out to fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src65_src.reg
[Sat Jan 28 04:46:24 2012] Extracting stamp from image fullrun_mos1_xmm0112570101_pi300-10000_cl_sm2.00.img.gz, (441, 323) - (516, 398)
[Sat Jan 28 04:46:24 2012] XMMSAS bgd. selection expression = annulus(41544.012787, 31289.482513, 1087.500000, 2175.000000, X, Y) && !ellipse(41056.167084, 33799.446320, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(43676.261505, 29532.166412, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39462.974274, 33706.188416, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jan 28 04:46:24 2012] Writing fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src65.gif
[Sat Jan 28 05:53:28 2012] Mean detx,y = (9040.35, 11424.33) 
[Sat Jan 28 05:53:29 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jan 28 05:53:38 2012] Binned source spectrum to 10 counts/bin
[Sat Jan 28 05:53:38 2012] Setting source spectrum file to fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src65_src_b10.pi.gz
[Sat Jan 28 05:53:38 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src65_bgd.pi.gz
[Sat Jan 28 08:35:56 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jan 28 08:35:56 2012] rmf not generated due to insufficient counts
[Sat Jan 28 13:51:44 2012] Updating aperture counts using extracted products
[Sat Jan 28 13:51:44 2012] Error reading totcts from fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src65_src_b10.pi.gz
[Sat Jan 28 13:51:47 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jan 28 13:51:47 2012] Using photon index=1.80, rate=0.00274, arf fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src65.arf
[Sat Jan 28 13:51:47 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jan 28 13:51:47 2012] Updating source flux to 5.7e-14
[Sat Jan 28 13:51:56 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting