[Wed Jan 25 01:02:52 2012] Detection parameters:
  Position = (278.4, 308.2) = 0 42 58.20 41 15 29.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 562.3 +/- 33.3
  Background counts = 73.8
  Rate = 0.01 +/- 0.0006

[Wed Jan 25 01:02:54 2012] Off-axis axis estimate = 1.62'
[Wed Jan 25 09:18:43 2012] Using EEF radius (= 7.24 ")to estimate initial spatial extent for simple fitting
[Wed Jan 25 09:18:43 2012] Initial guess for spatial extent in simple fitting = 7.24"
[Wed Jan 25 09:18:43 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.068
[Wed Jan 25 09:18:43 2012] Giving source the simple spatial ID 52 for pass 0, mean size = 7.24"
[Wed Jan 25 16:12:53 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_src52.ximg exists
[Wed Jan 25 16:12:53 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_src52_1.ximg exists
[Wed Jan 25 16:12:53 2012] Fit fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_src52 appears to have run properly
[Wed Jan 25 16:12:55 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src52.ximg exists
[Wed Jan 25 16:12:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src52.csv
[Wed Jan 25 16:12:55 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src52_1.ximg exists
[Wed Jan 25 16:12:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src52.csv
[Wed Jan 25 16:12:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src52_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src52.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan 25 22:38:36 2012] Source 54 is offset by -6.246691 and 5.866930 pixels which is larger than
2 X fitted extent = 0.831779 x 0.831779, not incorporating fit results
[Wed Jan 25 22:38:36 2012] Vigneting correction estimate = 1.000000
[Wed Jan 25 22:38:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 25 22:38:36 2012] Assessing source extent using major
[Wed Jan 25 22:38:36 2012] Source does appear to be extended
[Wed Jan 25 22:38:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan 26 13:17:26 2012] Using EEF radius (= 7.24 ")to estimate initial spatial extent for simple fitting
[Thu Jan 26 13:17:26 2012] Initial guess for spatial extent in simple fitting = 7.24"
[Thu Jan 26 13:17:26 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.068
[Thu Jan 26 13:17:26 2012] Giving source the simple spatial ID 52 for pass 1, mean size = 7.24"
[Thu Jan 26 18:45:14 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_src52.ximg exists
[Thu Jan 26 18:45:14 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_src52_1.ximg exists
[Thu Jan 26 18:45:14 2012] Fit fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_src52 appears to have run properly
[Thu Jan 26 18:45:16 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src52.ximg exists
[Thu Jan 26 18:45:16 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src52_1.ximg exists
[Thu Jan 26 18:45:16 2012] Fit fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src52 appears to have run properly
[Fri Jan 27 00:06:48 2012] Source 54 is offset by -6.246691 and -7.079070 pixels which is larger than
2 X fitted extent = 0.831779 x 1.895715, not incorporating fit results
[Fri Jan 27 00:06:48 2012] Vigneting correction estimate = 1.000000
[Fri Jan 27 00:06:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan 27 00:06:48 2012] Assessing source extent using major
[Fri Jan 27 00:06:48 2012] Source does appear to be extended
[Fri Jan 27 00:06:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jan 28 04:46:23 2012] XMMSAS src. selection expression = ellipse(24172.957916, 26766.002899, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jan 28 04:46:23 2012] Writing source region out to fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src54_src.reg
[Sat Jan 28 04:46:23 2012] Extracting stamp from image fullrun_mos1_xmm0112570101_pi300-10000_cl_sm2.00.img.gz, (241, 271) - (316, 346)
[Sat Jan 28 04:46:23 2012] XMMSAS bgd. selection expression = annulus(24172.957916, 26766.002899, 1087.500000, 2175.000000, X, Y) && !ellipse(26685.905400, 27915.396400, 480.308014, 480.308014, 0.000000, X, Y) && !ellipse(26390.977000, 26642.133540, 550.903216, 394.977611, 118.958700, X, Y) && !ellipse(23093.036412, 26688.566200, 452.647213, 452.647213, 0.000000, X, Y) && !ellipse(21386.017471, 26032.965240, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24924.345900, 27454.583600, 339.450410, 339.450410, 0.000000, X, Y) && !ellipse(22507.490600, 28642.546000, 434.552013, 392.565611, 98.079968, X, Y) && !ellipse(25473.484818, 26988.460634, 359.786971, 325.000892, 9.156307, X, Y) && !ellipse(23814.979400, 27509.894800, 354.992810, 354.992810, 0.000000, X, Y) && !ellipse(27738.710000, 27623.310000, 3524.496101, 3229.272093, 6.416000, X, Y) && !ellipse(27114.337433, 26752.366669, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25462.189697, 28563.733856, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26294.801575, 29505.841797, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27155.068237, 25116.627014, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25550.567657, 25625.659851, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23527.530914, 24822.508179, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24575.059448, 29092.788269, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23373.666656, 29193.676727, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jan 28 04:46:23 2012] Writing fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src54.gif
[Sat Jan 28 05:40:33 2012] Mean detx,y = (-1159.10, -3343.42) 
[Sat Jan 28 05:40:34 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jan 28 05:40:43 2012] Binned source spectrum to 10 counts/bin
[Sat Jan 28 05:40:43 2012] Setting source spectrum file to fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src54_src_b10.pi.gz
[Sat Jan 28 05:40:43 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src54_bgd.pi.gz
[Sat Jan 28 07:55:14 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jan 28 07:55:14 2012] rmf not generated due to insufficient counts
[Sat Jan 28 13:51:43 2012] Updating aperture counts using extracted products
[Sat Jan 28 13:51:44 2012] Error reading totcts from fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src54_src_b10.pi.gz
[Sat Jan 28 13:51:46 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jan 28 13:51:46 2012] Using photon index=1.80, rate=0.0103, arf fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src54.arf
[Sat Jan 28 13:51:46 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jan 28 13:51:46 2012] Updating source flux to 1.1e-13
[Sat Jan 28 13:51:56 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting