[Wed Jan 25 01:02:51 2012] Detection parameters:
  Position = (201.3, 349.9) = 0 43 27.99 41 18 30.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 300.1 +/- 22.3
  Background counts = 24.5
  Rate = 0.005 +/- 0.0004

[Wed Jan 25 01:02:54 2012] Off-axis axis estimate = 7.97'
[Wed Jan 25 09:18:43 2012] Using EEF radius (= 10.42 ")to estimate initial spatial extent for simple fitting
[Wed Jan 25 09:18:43 2012] Initial guess for spatial extent in simple fitting = 10.42"
[Wed Jan 25 09:18:43 2012] source mask rpix=2.4, npix_max = 33, mask sum = 35, frac = 1.044
[Wed Jan 25 09:18:43 2012] Giving source the simple spatial ID 69 for pass 0, mean size = 10.42"
[Wed Jan 25 16:12:53 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_src69.ximg exists
[Wed Jan 25 16:12:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_src69.csv
[Wed Jan 25 16:12:53 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_src69_1.ximg exists
[Wed Jan 25 16:12:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_src69.csv
[Wed Jan 25 16:12:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_src69_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_src69.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan 25 16:12:55 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src69.ximg exists
[Wed Jan 25 16:12:55 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src69_1.ximg exists
[Wed Jan 25 16:12:55 2012] Fit fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src69 appears to have run properly
[Wed Jan 25 22:38:36 2012] Warning, spatial fit 69 centroid is now closest to src. 93
[Wed Jan 25 22:38:36 2012] Vigneting correction estimate = 1.000000
[Wed Jan 25 22:38:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 25 22:38:36 2012] Assessing source extent using major
[Wed Jan 25 22:38:36 2012] Source does appear to be extended
[Wed Jan 25 22:38:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan 26 13:17:26 2012] Using EEF radius (= 10.42 ")to estimate initial spatial extent for simple fitting
[Thu Jan 26 13:17:26 2012] Initial guess for spatial extent in simple fitting = 10.42"
[Thu Jan 26 13:17:26 2012] source mask rpix=2.4, npix_max = 33, mask sum = 35, frac = 1.044
[Thu Jan 26 13:17:26 2012] Giving source the simple spatial ID 68 for pass 1, mean size = 10.42"
[Thu Jan 26 18:45:14 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_src68.ximg exists
[Thu Jan 26 18:45:14 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_src68_1.ximg exists
[Thu Jan 26 18:45:14 2012] Fit fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_src68 appears to have run properly
[Thu Jan 26 18:45:16 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src68.ximg exists
[Thu Jan 26 18:45:16 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src68_1.ximg exists
[Thu Jan 26 18:45:16 2012] Fit fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src68 appears to have run properly
[Fri Jan 27 00:06:48 2012] Warning: source 68 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 47 at 11.406018 pixels away
[Fri Jan 27 00:06:48 2012] Vigneting correction estimate = 1.000000
[Fri Jan 27 00:06:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan 27 00:06:48 2012] Assessing source extent using major
[Fri Jan 27 00:06:48 2012] Source does appear to be extended
[Fri Jan 27 00:06:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jan 28 04:46:23 2012] XMMSAS src. selection expression = ellipse(17460.985443, 30396.328003, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jan 28 04:46:23 2012] Writing source region out to fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src47_src.reg
[Sat Jan 28 04:46:23 2012] Extracting stamp from image fullrun_mos1_xmm0112570101_pi300-10000_cl_sm2.00.img.gz, (164, 312) - (239, 387)
[Sat Jan 28 04:46:23 2012] XMMSAS bgd. selection expression = annulus(17460.985443, 30396.328003, 1087.500000, 2175.000000, X, Y) && !ellipse(19531.070633, 32507.710846, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19018.015427, 29609.658752, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20149.724319, 30585.923645, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18142.414642, 29069.702789, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jan 28 04:46:23 2012] Writing fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src47.gif
[Sat Jan 28 05:46:32 2012] Mean detx,y = (-138.75, -10857.61) 
[Sat Jan 28 05:46:33 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jan 28 05:46:47 2012] Binned source spectrum to 10 counts/bin
[Sat Jan 28 05:46:47 2012] Setting source spectrum file to fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src47_src_b10.pi.gz
[Sat Jan 28 05:46:47 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src47_bgd.pi.gz
[Sat Jan 28 08:12:36 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jan 28 08:12:36 2012] rmf not generated due to insufficient counts
[Sat Jan 28 13:51:44 2012] Updating aperture counts using extracted products
[Sat Jan 28 13:51:44 2012] Error reading totcts from fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src47_src_b10.pi.gz
[Sat Jan 28 13:51:46 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jan 28 13:51:46 2012] Using photon index=1.80, rate=0.00472, arf fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src47.arf
[Sat Jan 28 13:51:46 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jan 28 13:51:46 2012] Updating source flux to 1.2e-13
[Sat Jan 28 13:51:56 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting