[Wed Jan 25 01:02:51 2012] Detection parameters:
  Position = (304.1, 444.2) = 0 42 48.28 41 25 21.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2369.9 +/- 58.0
  Background counts = 22.0
  Rate = 0.04 +/- 0.0009

[Wed Jan 25 01:02:54 2012] Off-axis axis estimate = 10.58'
[Wed Jan 25 09:18:43 2012] Using EEF radius (= 11.72 ")to estimate initial spatial extent for simple fitting
[Wed Jan 25 09:18:43 2012] Initial guess for spatial extent in simple fitting = 11.72"
[Wed Jan 25 09:18:43 2012] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.882
[Wed Jan 25 09:18:43 2012] Giving source the simple spatial ID 27 for pass 0, mean size = 11.72"
[Wed Jan 25 16:12:53 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_src27.ximg exists
[Wed Jan 25 16:12:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_src27.csv
[Wed Jan 25 16:12:53 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_src27_1.ximg exists
[Wed Jan 25 16:12:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_src27.csv
[Wed Jan 25 16:12:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan 25 16:12:55 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Wed Jan 25 16:12:55 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Wed Jan 25 16:12:55 2012] Fit fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src27 appears to have run properly
[Wed Jan 25 22:38:36 2012] Warning: source 27 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 41 at 15.728112 pixels away
[Wed Jan 25 22:38:36 2012] Vigneting correction estimate = 1.000000
[Wed Jan 25 22:38:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 25 22:38:36 2012] Assessing source extent using major
[Wed Jan 25 22:38:36 2012] Source does appear to be extended
[Wed Jan 25 22:38:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 25 22:38:36 2012] Source is confused with source 42
[Thu Jan 26 13:17:26 2012] Using EEF radius (= 11.72 ")to estimate initial spatial extent for simple fitting
[Thu Jan 26 13:17:26 2012] Initial guess for spatial extent in simple fitting = 11.72"
[Thu Jan 26 13:17:26 2012] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.882
[Thu Jan 26 13:17:26 2012] Giving source the simple spatial ID 27 for pass 1, mean size = 11.72"
[Thu Jan 26 18:45:14 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_src27.ximg exists
[Thu Jan 26 18:45:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_src27.csv
[Thu Jan 26 18:45:14 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_src27_1.ximg exists
[Thu Jan 26 18:45:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_src27.csv
[Thu Jan 26 18:45:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 26 18:45:15 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Thu Jan 26 18:45:15 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Thu Jan 26 18:45:15 2012] Fit fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src27 appears to have run properly
[Fri Jan 27 00:06:48 2012] Warning: source 27 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 41 at 14.625286 pixels away
[Fri Jan 27 00:06:48 2012] Source 41 is offset by 3.205752 and 0.923711 pixels which is larger than
2 X fitted extent = 2.812202 x 2.812202, not incorporating fit results
[Fri Jan 27 00:06:48 2012] Vigneting correction estimate = 1.000000
[Fri Jan 27 00:06:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan 27 00:06:48 2012] Assessing source extent using major
[Fri Jan 27 00:06:48 2012] Source does appear to be extended
[Fri Jan 27 00:06:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jan 28 04:46:21 2012] Counts = 2369.929932, rescaling region sizes by 2.000000
[Sat Jan 28 04:46:21 2012] XMMSAS src. selection expression = ellipse(26408.216461, 38598.926849, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sat Jan 28 04:46:21 2012] Writing source region out to fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src41_src.reg
[Sat Jan 28 04:46:21 2012] Extracting stamp from image fullrun_mos1_xmm0112570101_pi300-10000_cl_sm2.00.img.gz, (229, 369) - (379, 519)
[Sat Jan 28 04:46:21 2012] XMMSAS bgd. selection expression = annulus(26408.216461, 38598.926849, 4350.000000, 8700.000000, X, Y) && !ellipse(34339.986800, 30517.173000, 466.041613, 371.900811, 230.341000, X, Y) && !ellipse(25474.320600, 30868.774600, 385.363211, 385.363211, 0.000000, X, Y) && !ellipse(27738.710000, 27623.310000, 3524.496101, 3229.272093, 6.416000, X, Y) && !ellipse(23867.650140, 31371.159800, 406.206412, 406.206412, 0.000000, X, Y) && !ellipse(22915.430800, 29889.633200, 383.604011, 383.604011, 0.000000, X, Y) && !ellipse(30267.409200, 31762.047800, 388.977611, 388.977611, 0.000000, X, Y) && !ellipse(35540.569397, 30165.502411, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34570.060608, 29779.684174, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19531.070633, 32507.710846, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22191.156433, 29983.603699, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24852.589661, 30494.306549, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35286.538849, 33177.394196, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26206.931800, 30108.992000, 357.876010, 343.552810, 184.530000, X, Y) && !ellipse(31430.715520, 31285.005200, 378.335211, 378.335211, 0.000000, X, Y) && !ellipse(35159.166473, 29527.145752, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19018.015427, 29609.658752, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28248.032288, 30412.027191, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31409.803131, 39244.611389, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29371.143700, 32298.739800, 384.794411, 310.752009, 23.747500, X, Y) && !ellipse(33837.137115, 32812.184296, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25280.822000, 39231.598800, 1927.832055, 478.452014, 187.732000, X, Y) && !ellipse(17460.985443, 30396.328003, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21182.283400, 29967.019600, 469.431214, 469.431214, 0.000000, X, Y) && !ellipse(27912.156000, 33471.104600, 303.993609, 303.993609, 0.000000, X, Y) && !ellipse(22086.194400, 32613.082400, 1220.296035, 523.360015, 297.007988, X, Y) && !ellipse(20149.724319, 30585.923645, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29641.280151, 34368.219971, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26294.801575, 29505.841797, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32710.148865, 40229.433441, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30684.842072, 43083.268677, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27328.178802, 41986.526520, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24652.379211, 39345.130798, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33875.069519, 29810.917938, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28746.160000, 29475.792000, 1280.584037, 1280.584037, 0.000000, X, Y) && !ellipse(25876.084869, 31475.703613, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(28294.131561, 29250.223541, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26737.179901, 33766.290314, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24575.059448, 29092.788269, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23373.666656, 29193.676727, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18142.414642, 29069.702789, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jan 28 04:46:21 2012] Writing fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src41.gif
[Sat Jan 28 05:16:09 2012] Mean detx,y = (10652.97, -5325.09) 
[Sat Jan 28 05:16:10 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jan 28 05:17:14 2012] Binned source spectrum to 10 counts/bin
[Sat Jan 28 05:17:14 2012] Setting source spectrum file to fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src41_src_b10.pi.gz
[Sat Jan 28 05:17:14 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src41_bgd.pi.gz
[Sat Jan 28 07:17:59 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jan 28 07:17:59 2012] rmf not generated due to insufficient counts
[Sat Jan 28 13:51:43 2012] Updating aperture counts using extracted products
[Sat Jan 28 13:51:43 2012] Error reading totcts from fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src41_src_b10.pi.gz
[Sat Jan 28 13:51:46 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jan 28 13:51:46 2012] Using photon index=1.80, rate=0.0373, arf fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src41.arf
[Sat Jan 28 13:51:46 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jan 28 13:51:46 2012] Updating source flux to 6.4e-13
[Sat Jan 28 13:51:56 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting